Danfoss KE07205 Ramped Valve Driver
GENERAL DESCRIPTION
This device is a ramped valve driver which accepts a setpoint potentiometer input from a control handle and drives a dual coil proportional valve. It is pulse-width modulated and has adjustable acceleration/deceleration ramping. The threshold, full stroke forward and full stroke reverse outputs are adjustable.
The KE07205 is a direct replacement for the MXX458 or the MXX1139. It is the same as the KE07203 except it has a 3.4 volt reference for null.
DIMENSION AND CONNECTION DIAGRAM
WHEN USED WITH LOAD CONTROL, CONNECT LOAD CONTROL OUTPUT TO TERMINAL 2 AND REMOVE JUMPER J4
Dimensions in millimeters (inches).
OUTPUT CHARACTERISTICS
- SUPPLY VOLTAGE 24 Vdc
- PWM FREQUENCY 100 Hz
- OUTPUT CURRENT 0.7 A
- FACTORY SETTINGS WITH 26 OHM LOAD
Threshold: 200 mA
Full Stroke 600 mA
ADJUSTMENTS
Documents / Resources
 | Danfoss KE07205 Ramped Valve Driver [pdf] Instructions KE07205 Ramped Valve Driver, KE07205, Ramped Valve Driver, Valve Driver |
