daitsu Control Wifi SWD Coral Wifi Inverter Module

Specifications

• Product Name: WIFI Inverter Module
• Model: CONTROL WIFI SWD CORAL
• Edition: R0000

Product Information

The WIFI Inverter Module is designed to receive data signals from cloud servers and transmit them to the main device. It also facilitates the remote upgrade of the WIFI module baseplate MCU and the main device through cloud server integration.

User Privacy Instructions

We take your privacy very seriously and we promise to inform you how we use the data. Users’ private data, such as mailboxes, address, before uploading to the cloud, we will get your permission, and we will work hard to protect your data security.

Description

• Receive data signal from cloud server and transmit to the main device;
• Receive data signal from main device and transmit to cloud server;
• To achieve remote upgrade the WIFI module baseplate MCU by cloud server;
• To achieve the remote upgrade of the main device by WIFI module baseplate MCU.

Technical Parameters

• OPERATING VOLTAGE: DC8V~12V (Recommended value 12V)
• OPERATING CURRENT: Max. recurrent peak 1A, average standby current 50mA
• TEMP. RANGE: Operating Temp.: -30℃~+70℃; Storage Temp.: -40℃~+85℃
• LED INDICATOR LIGHT:  4 lights, Network configuration indicator,router connection indicator, cloud server connection indicator, 485 communication indicator;
• DIMENSION(L×W×H)： 78mm×63mm×24mm

Installation

• There is a magnet on the back of the WIFI module, it can be installed indoors or outdoors, and avoid direct sunlight;
• Please scan the following QR code to download APP;

Functional Description

MXL-WX17

Account Login

Use email address and password to register, login or reset the password.

1. Account Registration: To register an account, click 1 (Fig.1) to jump to the Account Registration interface, fill in the relevant information and click 2 to receive verification code, while completed the application information, click 3 to read the details of the Privacy Policy, then click 4 to agree, and click 5 , registration is done.
   Please note, the valid time of one verification code is 15min, please fill in the verification code within 15min, otherwise you need to ask for a new one.
2. Log in: Follow the instructions on the page(Fig.1 ), enter your registered email address and password, click 6 and jump to device list;
3. Forgot Password: While forget your password, click 7 (Fig.1 ), jump to the Forgot Password interface (Fig.3 ). Follow the instructions on the page, fill in the relevant informations, click 8 to receive verification code from your mailbox, click 9 to comfirm and password reset is done.

Add Device
After log in, displays My Device interface (Fig. 4) , follow the instruction to add WIFI or DTU.

IOS WIFI Configure Network

1. Click 10 to confirm the permisson of bluetooth,location and camera(Fig.7);
2. Follow the instructions on the page (Fig.8), press button on module and hold for 1s till two lights on, then AP connection is activated, click 12 to next;
3. Click 13 to enter the WIFI password for the current connection, click 14 to confirm.
4. Click “OK” to allow bluetooth permission (Fig.10);
5. Click “Settings” （Fig.11）to enter bluetooth setting interface(Fig.12);
6. Turn on bluetooth and back to the APP, derectly enter the searching device interface(Fig. 13), If the connection fails or succeeds, a pop-up window will appear. If the connection fails(Fig.14-1/Fig.14-2), try again as prompted. If successful(Fig.15), check the light 1 of the wifi module indicator, and then select the operation according to the prompts.
7. Click 15 to bond device (Fig.16);
8. Click “OK” （Fig.17）to allow the App to use the camera for scanning the WF code on the WIFI module (Fig.19.1), or click “manual input” to enter the WF code(Fig.19.2).
9. Click “Comfirmed”, device bond is done (Fig.20).
10. After WIFI bonding is done, and jump back to My Device(Fig.21);
11. Click the device derectly jump to device main interface(Fig.22).

Android WIFI Configure Network

1. Click 16 to confirm the permisson of bluetooth,location and camera(Fig.23);
2. Follow the instructions on the page (Fig.24), press button on module and hold for 1s till two lights on, then AP connection is activated, click 18 to next;
3. Click 19 to enter the WIFI password for the current connection, click 20 to confirm.
4. Click “OK” to enable bluetooth permission (Fig.26);
5. Click “Allow” to enable bluetooth permission (Fig.27);
6. Click “Reconnect” (Fig.28) derectly jump to searching device interface(Fig.29), If the connection fails or succeeds, a pop-up window will appear. If the connection fails(Fig.30-1/Fig.30-2), try again as prompted.
   If successful(Fig.31), check the light 1 of the wifi module indicator, and then select the operation according to the prompts.
7. Click 21 to bond device (Fig.32);
8. Click “While using the app” allow the App to use the camera for scanning the WF code on the WIFI module (Fig.35.1), or click “manual input” to enter the WF code(Fig.35.2).
9. Click “OK”, device bond is done (Fig.36).
10. After WIFI bonding is done, and jump back to My Device(Fig.37);
11. Click the device derectly jump to device main interface(Fig.38).

Device Management

Device management operations are as below :

Eurofred S.A.
Marqués de Sentmenat 97 08029 Barcelona
www.eurofred.es

FAQ

• Q: How do I reset my password?
  A: To reset your password, click on ‘Forgot Password’ on the login interface and follow the instructions provided.
• Q: Can the WIFI Inverter Module be installed outdoors?
  A: Yes, the module can be installed both indoors and outdoors using the magnet on the back, but direct sunlight should be avoided.

Documents / Resources

daitsu Control Wifi SWD Coral Wifi Inverter Module [pdf] User Manual CONTROL WIFI SWD CORAL, Control Wifi SWD Coral Wifi Inverter Module, Wifi Inverter Module, Inverter Module, Module

References

• User Manual