Laserliner - logoKondenser Spot XP
BrugermanualLaserliner Condense Spot XPLaserliner Condense Spot XP 2

Laserliner Condense Spot XP - icon 2Read the operating instructions and the enclosed brochure „Guarantee and additional notices“ completely. Follow the instructions they contain. Safely keep these documents for future reference.

Funktion/applikation

The CondenseSpot is an infrared temperature measuring instrument with an integrated hygrometer that permits non-contact temperature measurements on surfaces as well as the measurement of relative humidity and ambient temperature. The instrument measures how much electromagnetic energy is emitted in the infrared wavelength range and uses this information to calculate surface temperature. During this process, two additional integrated sensors detect relative humidity and ambient temperature. The dew point is also calculated.

Laserliner Condense Spot XP - figure 1Laserliner Condense Spot XP 3

1 low battery charge 6 min/max and average measurement values
2 stability progress bar for relative
humidity measurement
7 dew point temperature (D Temp) and ambient temperature  (A Temp) in °C or °F
3 laser beam switched on, temperature measurement (infrared) 8 condense water indicator
4 measurements in °C or °F 9 last measurement value will be displayed brie y (7s)
5 relative humidity in % 10 replace battery

Laserliner Condense Spot XP 4Laserliner Condense Spot XP 5

Laser: The laser is a targeting aid to sight the location for the infrared measurement. Only the surface‘s temperature is measured. Laserliner Condense Spot XP 6

7. Displaying Min/Max/Avg, Ambient temperature, Dew point temperatureLaserliner Condense Spot XP 7

8. Dew point temperature is the temperature at which current air conditions would produce condensation. The CondenseSpot calculates the dew point temperature from ambient temperature, relative humidity, and ambient atmospheric pressure. In combination with the infrared thermometer, thermal bridges are easily detected. If the temperature of the measured location drops below the dew point, condensation (water) will form on the surface.Laserliner Condense Spot XP 8

9. Relativ fugtighed
The relative humidity is indicated in relation to the maximum possible humidity (100 %) at which air forms water vapor. The ability of air to hold water is temperature-dependent. Thus humidity is the volume of water vapor in the air. The range for humidity is 0 … 100%. 100% = saturation point.
Under these conditions for temperature and atmospheric pressure, air cannot absorb any more water.Laserliner Condense Spot XP 9

When temperature fluctuations (± 1 °C) and/or changes to relative humidity (± 1%) are rapid, the sensor must adapt itself to the new conditions. An hourglass with a progress bar is displayed during this stabilization process.
During this process, displayed values are only approximations. Only after these symbols have been switched off is a stable value presented which represents maximum accuracy.

10. Setting the emission coef cientLaserliner Condense Spot XP 10

A built-in sensor head detects the material/surface-specific infrared rays emitted by every object. The level of these emissions is determined by the material‘s emission coefficient (0.01 to 0.99). This instrument is preset to an emission coefficient of 0.95, which is applicable to most organic materials as well as plastics,  ceramics, wood, rubber, and stone. For details of those materials with a different emission coefficient, please refer to the table.

Ukendt emissionskoefficient:
Apply masking tape or black matt paint to the surface of the area whose temperature you wish to measure. Wait until the tape/paint has heated up.
The temperature of the surface can then be measured with an emission coefficient of 0.95.

11. Emission coef cient tables
Ikke-metaller

Asbest 0.93 Limestone 0.98
Asfalt 0.95 Marmor
Black, dull finish Greyish, polished
0.94
0.93
basalt 0.70
Murstensrød 0.93
carborundum 0.90 Murværk 0.93
Keramik 0.95 Paint
Sort, mat
Heat-resistant White
0.96-0.98 0.92
0.85-0.95
Kina
Brilliant white With glaze
0.7 - 0.75 0.92
Clay 0.95 Papir
Alle farver
0.95-0.97
Coal Non-oxidised 0.8-0.9
Plast
Translucent PE, P, PVC
0.95
0.94
Concrete, plaster, mortar 0.93
Bomuld 0.77 Gummi
Hård
Blød, grå
0.94-0.95 0.89
lertøj, mat 0.93
Stof 0.95
Glas 0.85-0.94 Kvartsglas 0.93
Graphite 0.7-0.8 Sne 0.80
grus 0.95 Jord 0.9-0.98
gips 0.8-0.95 Tar 0.79-0.84
Køleplade Sort, anodiseret 0.98 Tjærepapir 0.91-0.93
Transformer maling 0.94
Menneskelig hud 0.98 Tapet, lysfarvet 0.88-0.90
Is
Klar
Med kraftig frost
0.97
0.98
Vand 0.93
Træ
Ubehandlet
Bøg, høvlet
0.8-0.95 0.94
lime 0.3-0.4
Lime maim brick 0.95

Metaller

Alloy A3003 Oxidised
Ru
0.3
0.1 - 03
Jern, smedet Matt 0.9
Bly
Rough
Oxideret
0.4
0.2 - 0.6
Aluminium Oxidised
Poleret
0.2 - 0.4
0.04 - 0.06
Molybdenum Oxidised 0.2 - 0.6
Messing
Poleret
Oxideret
0.3
0.5
Nickel Oxidised 0.2 - 0.6
Platin sort 0.9
Kobber
Oxideret
Elect. terminal strips
0.4 - 0.8 0.6 Stål
Cold rolled Ground plate
Poleret plade
Legering (8% nikkel,
18% chromium) Galvanised Oxidised
Stærkt oxideret
Freshly rolled Rough, flat surface
Rusten, rød
Sheet, nickel-plated Sheet, rolled
0.7 - 0.9 0.4 - 0.6 0.1
0.35
0.28
0.80
0.88
0.24
0.95-0.98 0.69
0.11
0.56
Haynes Metal alloy 0.3 - 0.8
Inconel
Oxideret
Sandblasted Electropolished
0.7 - 0.95 0.3 - 0.6 0.15
Jern
Oxideret
Med rust
With red rust
0.5 - 0.9 0.5 - 0.7 0.61 - 0.85
Jern, støbt
Oxideret
Non-oxidised
Smeltet masse
0.6 - 0.95 0.2
02 - 03
Zinc Oxidised 0.1

Tekniske data

Technical revisions reserved. 08.13

Measured quantities °C (°F) infrared temperature measurement, %rH relative humidity, °C (°F) ambient temperature measurement
Infrared measurement range -40 °C … 350 °C (-40 °F … 662 °F)
Måleområde for omgivende temperatur -10 °C … 60 °C (14 °F … 140 °F)
Relative humidity measurement range 20 % … 90 % rH
Dew point indicator -20 ° C ... 60 ° C
Infrarød nøjagtighed t 1 °C (-10 °C … 60 °C); t 1.5 °C (< 10 °C and > 60 °C) or t 1.5 % whichever value is greater
Ambient temperature accuracy t 2 °C
Relative humidity accuracy t 3%
Infrared resolution 0.1 ° C
Relative humidity resolution 1%
Dew point resolution 1 ° C
Emissionskoefficient Adjustable, 0.10 … 0.99
Driftstemperatur 0 ° C… 40 ° C
Opbevaringstemperatur -20 ° C ... 70 ° C
Optik 8:1 (distance: measured spot)
Laserbølgelængde 650 nm
Laser typen Class 2, < 1 mW
Strømforsyning Type 9 V E block battery

General safety instructions.
Attention: Do not look directly into the laser beam! The laser may not get into the hands of children! Do not point this device unnecessarily toward persons.Laserliner Condense Spot XP - warning

EU-direktiver og bortskaffelse
Laserliner Condense Spot XP - ce
Denne enhed overholder alle nødvendige standarder for fri bevægelighed for varer inden for EU.
Dette produkt er en elektrisk enhed og skal indsamles separat til bortskaffelse i henhold til det europæiske direktiv om affald af elektrisk og elektronisk udstyr.
Yderligere sikkerheds- og supplerende meddelelser på: www.laserliner.com/info
CondenseSpotLaserliner Condense Spot XP - CondenseSpot

Laserliner Condense Spot XP - iconSERVICE
Umarex GmbH & Co KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Tyskland
Tlf.: +49 2932 638-300, Fax: +49 2932 638-333
[e-mail beskyttet]
Umarex GmbH & Co KG
Tordenfelt 2
59757 Arnsberg, Tyskland
Tlf.: +49 2932 638-300, Fax: -333
www.laserliner.com
Laserliner - logoLaserliner Condense Spot XP - ce

Dokumenter/ressourcer

Laserliner Condense Spot XP [pdf] Brugervejledning
Kondenser Spot XP

Efterlad en kommentar

Din e-mail adresse vil ikke blive offentliggjort.