KRAMER CLS-AOCH-60-XX Audio and Video Cable Assembly
Installationsvejledning
SIKKERHEDSADVARSEL
Afbryd enheden fra strømforsyningen inden åbning og service
Besøg vores for at få de seneste oplysninger om vores produkter og en liste over Kramer -forhandlere Web websted, hvor der kan findes opdateringer til denne brugermanual. Vi glæder os over dine spørgsmål, kommentarer og feedback.
www.kramerAV.com
info@kramerel.com
CLS-AOCH/60-XX / CP-AOCH/60-XX Active Optical UHD Pluggable HDMI Cable
Congratulations on purchasing your Kramer CLS-AOCH/60-XX / CP-AOCH/60-XX Plug and Play active Active Optical UHD Pluggable HDMI Cable which is suited for critical and versatile installations.
The CLS-AOCH/60-XX / CP-AOCH/60-XX provides an extremely high quality signal over a wide range of resolutions, up to 4K@60Hz (4:4:4). This cable is available in different lengths from 33ft (10m) to 328ft (100m). The CLS-AOCH/60-XX / CP-AOCH/60-XX has a slim design to let you pull the cables easily (together with the supplied pulling tool) through small-sized conduits. 
The CLS-AOCH/60-XX / CP-AOCH/60-XX is ideal for long-distance transmission in professional AV systems, indoor and outdoor digital signage and kiosks, home theater systems, surgical theaters, and facility automation systems and whenever high-resolution video and audio are required.
Funktionalitet
The CLS-AOCH/60-XX / CP-AOCH/60-XX:
- Supports a wide range of resolutions up to 4K@60Hz (color space 4:4:4) 3D and Deep Color.
- Supports Multi-channel audio, Dolby True HD, DTS-HD Master Audio.
- Is HDMI compliant: EDID, CEC, HDCP (2.2), HDR (High Dynamic Range).
- Reduced EMI and RFI.
- Includes a micro USB port to optionally connect an external 5V power supply (if required, this is typically connected on the display side).
- Has high pulling strength and compression load.
- Har Kilde / Display tydeligt trykt på stikket samt tagged on the cable for easy identification.
Kabeldimensioner
The CLS-AOCH/60-XX / CP-AOCH/60-XX includes four optical fibers and six AWG 28 wires with compact size HDMI connectors. On the source side, the micro HDMI connector enables smooth pulling of the cable. The SOURCE end connects to the source (for example, en DVD-, Blu-ray- eller spilkonsolboks) og DISPLAY-enden til acceptoren (f.eks.ample, a projector, an LCD display or a tablet device), see Figure 2 (note that SOURCE appears here as an example).
CLS-AOCH/60-XX / CP-AOCH/60-XX Plug and Play Installation
Før du installerer kablet, skal du sørge for, at du har et HDMI-grafikkort eller enheder med en HDMI-port (f.eksample, en pc, bærbar computer, DVD/Blue-ray-afspiller eller enhver anden video-/lydsignalkildeenhed).
Optical fiber cable is not robust physically compared to conventional copper cable materials. Even though this cable is designed to be resistant to artificial strengths on the cable, CLS-AOCH/60-XX / CP-AOCH/60-XX can be damaged if it is excessively pinched, twisted or kinked when being installed and after being installed. Take care not to bend or twist the cable tightly.
When CLS-AOCH/60-XX / CP-AOCH/60-XX is installed into the conduit, the fiber pulling strength and the bending radius are the key conditions to safe installation of the cable.
Do not disassemble or modify the products, especially the HDMI connector head parts. To install the
CLS-AOCH/60-XX / CP-AOCH/60-XX:
- Pak kablet ud af pakken forsigtigt og fjern kabelbinderen.
- Placer mikro-HDMI (Type D) stikket inde i trækkeværktøjet, og luk dets dæksel.
Note that you can pull the cable either from the display side or the source side (as shown in Figure 3), but you have to make sure that the cable polarity is correct (tagged Kilde, hvis du trækker i kildesiden eller Display, hvis du trækker i skærmsiden). - Fastgør trækkablet til trækværktøjet.
- Installer forsigtigt kablet (f.eksample, i væggen eller kanalen eller under gulvet).
- Connect the:
- SOURCE HDMI adaptor to the micro-HDMI connector SOURCE end of the cable.
- DISPLAY HDMI adaptor to the micro-HDMI connector DISPLAY end of the cable.
HDMI adapters in this box are not interchangeable!
You must connect the adapter marked SOURCE to the SOURCE connector head of the cable and the adapter marked DISPLAY to the DISPLAY connector head of the cable .
Connecting an adapter to the wrong end of the cable could cause damage to the cable, adapter, and connected AV equipment.
- Secure the connection on each side using the supplied locking screws.
- Plug the SOURCE connector head of the cable into the source devices. Do not plug the SOURCE connector to the display device.
- Plug the DISPLAY connector head of the cable into the display devices. Do not plug the DISPLAY connector to the source device.
- Tænd for strømmen til kilden og displayenhederne.
- If required, connect an external power source via the micro-USB connector on the DISPLAY side.
Fejlfinding
Hvis du er stødt på et problem, skal du kontrollere, at:
- Kilde- og displayenhederne er begge tændt
- Begge HDMI-stikhoveder er fuldt tilsluttet enhederne
- Kablet eller dets kappe er ikke fysisk beskadiget
- Kablet er ikke bøjet eller bøjet
Bemærk, at det er vigtigt at tilslutte kablet korrekt som markeret i enden af hvert stik: SOURCE til kildesiden og DISPLAY til acceptorsiden.
Specifikationer
| Lyd og strøm | ||||||
| Video Opløsning: | Up to 4K@60Hz (4:4:4) | |||||
| Embedded Audio Support: | PCM 8ch, Dolby Digital True HD, DTS-HD Master Audio | |||||
| HDMI Support: | HDCP 2.2, HDR, EDID, CEC | |||||
| Cable Assembly | ||||||
| HDMI -stik: | Han HDMI Type A-stik | |||||
| dimensioner: | Micro HDMI port: 1.23cm x 4.9cm x 0.8cm (0.484″ x 1.93″ x 0.31″) W, D, H Type A HDMI port: 3.1cm x 4cm x 0.95cm (1.22″ x 1.57″ x 0.37″) W, D, H
Assembly: 2.22cm x 7.1cm x 0.99cm (0.874″ x 2.79″ x 0.39″) W, D, H |
|||||
| Cable Structure: | Hybrid optisk fiberkabel | |||||
| Kabeljakke Materiale: | UL Plenum (CMP-OF) og LSHF (Low Smoke Halogen Free) | |||||
| Kabeljakke farve: | UL Plenum: black; LSHF: black | |||||
| Kabeldiameter: | 3.4mm | Cable Bending Radius: | 6mm | |||
| Cable Pulling Strength: | 500N (50 kg, 110 lbs) | Micro USB-kabel | External 5V power supply cable | |||
| Power | ||||||
| Power Supply HDMI: | Power is supplied from an external USB connector on the display side | |||||
| Strømforbrug: | Maks. 0.75W | |||||
| Generelt | ||||||
| Driftstemperatur: | 0 ° til + 50 ° C (32 ° til 122 ° F) | Stuetemperatur: | -30 ° til + 70 ° C (-22 ° til 158 ° F) | |||
| Luftfugtighed ved drift: | 5% til 85%, RHL ikke-kondenserende | |||||
| Available Length: | 33ft (10m), 50ft (15m), 66ft (20m), 98ft (30m), 131ft (40m), 164ft (50m), 197ft (60m),
230ft (70m), 262ft (80m), 295ft (90m) and 328ft (100m) |
|||||
Dokumenter/ressourcer
 |
KRAMER CLS-AOCH-60-XX Audio and Video Cable Assembly [pdf] Brugsanvisning CLS-AOCH-60-XX, Audio and Video Cable Assembly |
Kramer | Audiovisuelle løsninger - Kramer 
