Indledning
This instruction manual provides essential information for the safe and effective use of your Ingersoll Rand DXS2SH1-316L DXS2 1-3/16" SAE Deep Impact Socket. Please read this manual thoroughly before operation and retain it for future reference. The DXS2 socket is designed for enhanced performance with Ingersoll Rand DXS impact wrenches, offering improved torque transfer and durability.
Sikkerhedsoplysninger
Always observe general safety precautions when using hand tools and power tools. Failure to do so may result in injury or damage to the tool or workpiece.
- Wear appropriate personal protective equipment (PPE), including eye protection, gloves, and hearing protection.
- Ensure the socket is correctly seated and secured on the impact wrench before operation.
- Do not use damaged or worn sockets. Inspect the socket for cracks, wear, or deformation before each use.
- Use the correct size socket for the fastener to prevent rounding or damage.
- Keep hands and clothing clear of rotating parts.
Produkt overview og funktioner
The Ingersoll Rand DXS2SH1-316L is a 1-3/16" SAE deep impact socket, part of the DXS2 series. It features the innovative Drive Xchange System for enhanced performance.
- DXS Drive System: Engineered to provide up to 15% better torque efficiency compared to traditional square drive sockets. It also reduces the overall tool length by up to 3/4" when used with compatible Ingersoll Rand DXS impact wrenches, allowing for better access in confined spaces.
- Holdbarhed: Constructed from chrome-molybdenum (CR-MO) alloy steel for impact-grade toughness. The manganese phosphate finish resists corrosion, contributing to up to 20% longer wear life compared to traditional square driven sockets.
- Secure Retention: Features a ball nose retention pin for quick, tool-free installation and removal from the impact wrench.
- High Visibility Markings: Laser-etched markings ensure easy identification of the socket size.
Figure 1: Ingersoll Rand DXS2SH1-316L 1-3/16" SAE Deep Impact Socket. This image shows the main product, highlighting its size and model number markings.
Opsætning
- Inspicer stikkontakt: Before attaching, visually inspect the socket for any signs of damage, cracks, or excessive wear. Do not use a damaged socket.
- Prepare Impact Wrench: Ensure your impact wrench is clean and the drive anvil is free from debris. This socket is designed for use with Ingersoll Rand DXS impact wrenches.
- Fastgør stikkontakt: Align the socket's drive end with the impact wrench's drive anvil. Push the socket firmly onto the anvil until the ball nose retention pin engages securely. A click or firm seating indicates proper attachment.
- Bekræft sikkerhed: Gently pull on the socket to confirm it is securely attached and does not wobble excessively.
Figure 2: Proper attachment of the DXS2 socket to an Ingersoll Rand impact wrench. The image illustrates a user securing the socket onto the tool's drive.
Betjeningsvejledning
- Vælg den rigtige størrelse: Always use the 1-3/16" socket for fasteners of the corresponding size. Using an incorrect size can damage the fastener or the socket.
- Position Stikkontakt: Place the socket squarely onto the fastener head. Ensure full engagement to prevent slipping or rounding.
- Operate Impact Wrench: Activate the impact wrench. Apply steady, even pressure. For tightening, ensure the fastener is tightened to the manufacturer's specified torque using a torque wrench after initial impact tightening. For loosening, apply power until the fastener breaks free.
- Access in Tight Spaces: The DXS design allows for a shorter overall tool length, which is beneficial for reaching fasteners in confined areas.
Figure 3: Demonstrating the use of the DXS2 socket with an impact wrench to access a fastener in a restricted area. The image shows a mechanic working under a vehicle.
Opretholdelse
- Rensning: After each use, wipe the socket clean of dirt, grease, and debris. A mild solvent can be used if necessary, followed by thorough drying.
- Inspektion: Regularly inspect the socket for signs of wear, such as rounded corners, cracks, or deformation. Pay close attention to the drive end and the fastener engagement area.
- Opbevaring: Store the socket in a dry environment to prevent rust. The manganese phosphate finish provides corrosion resistance, but proper storage further extends its life.
- Udskiftning: Replace any socket that shows signs of significant wear or damage immediately to prevent injury or damage to fasteners.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Socket does not fit fastener | Incorrect socket size; fastener head is damaged. | Ensure the 1-3/16" socket matches the fastener size. Inspect fastener for damage. |
| Socket wobbles on impact wrench | Socket not fully engaged; retention pin not functioning; drive anvil worn. | Push socket firmly until retention pin engages. Inspect retention pin and impact wrench drive anvil for wear. |
| Socket rounds fastener corners | Socket worn; incorrect size; improper application. | Replace worn socket. Ensure correct size is used. Apply socket squarely to fastener. |
Specifikationer
| Attribut | Detalje |
|---|---|
| Mærke | Ingersoll Rand |
| Varenummer | DXS2SH1-316L |
| Varemodelnummer | DXS2SH1-316L |
| Størrelse | 1-3/16" |
| Stil | SAE-Deep |
| Varens vægt | 11.6 ounce |
| Produktdimensioner | 1.72 x 1.72 x 2.95 tommer |
| Farve | Grå |
| Strømkilde | Air Powered (for compatible impact wrenches) |
| Vare Pakke Antal | 1 |
| Antal stykker | 1 |
| Inkluderede komponenter | (1) DXS2SH1-316L Socket |
Garanti og support
Garanti: This Ingersoll Rand DXS2SH1-316L socket comes with a lifetime warranty. Please note that the warranty does not cover abuse or misuse of the product.
Kundesupport: For technical assistance, warranty claims, or further information, please visit the official Ingersoll Rand website or contact their customer service department. Refer to the product packaging or the Ingersoll Rand webhjemmeside for de seneste kontaktoplysninger.
You can visit the Ingersoll Rand Store for more products and information: Ingersoll Rand-butik på Amazon