WinZo Smart Toilet with Bidet Seat (Model SM8005-4) User Manual

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your WinZo Smart Toilet with Bidet Seat, Model SM8005-4. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Sikkerhedsoplysninger

• Sørg for, at alle elektriske forbindelser overholder lokale forskrifter og bestemmelser.
• Produktet må ikke nedsænkes i vand, og der må ikke sprøjtes vand direkte på elektriske komponenter.
• Unplug the toilet from the power outlet before performing any maintenance or cleaning.
• Do not allow children or individuals with reduced physical, sensory, or mental capabilities to operate the toilet without supervision.
• Avoid using abrasive cleaners or harsh chemicals that may damage the surface or internal components.
• Ensure the water supply is turned off before any installation or repair work.

Dele inkluderet

Kontroller, at alle komponenter er til stede, før installationen påbegyndes.

Figur 1: Installation parts including wax ring, bolts, washers, and nuts.

• Smart Toilet Unit with Bidet Seat
• Floor Fixing Bolts and Washers
• Voks ring
• Vinkel Valve
• Water Inlet Pipe (Braided Tube)
• Fjernbetjening
• Brugervejledning (dette dokument)

Installationsvejledning

Follow these steps carefully for proper installation. Professional installation is recommended.

1. Forberedelse af stedet

Ensure the installation area is clean and dry. Verify that the floor is horizontal and the sewer pipe is unobstructed. Measure the rough-in distance from the wall to the center of the drain hole. It should be at least 12 inches.

Figur 2: Preparing the floor for installation, ensuring it is clean and level.

2. Install Angle Valve

Wrap the raw material belt (Teflon tape) around the threads of the angle valve. Install the angle valve onto the water supply line on the wall. Open the angle valve to the maximum and check for any water leakage.

3. Install Floor Flange and Bolts

Install the expansion screws into the floor flange. Mount the flange at the drain opening, ensuring it is securely fastened.

4. Prepare and Position the Toilet

Install the wax ring onto the bottom of the toilet unit, around the drain opening. Carefully lift the toilet and align the drain hole with the floor flange bolts. Lower the toilet onto the bolts.

5. Secure the Toilet and Connect Water

Place washers and nuts over the flange bolts and tighten them to secure the toilet to the floor. Connect the water inlet pipe from the angle valve to the toilet's water inlet. Ensure all connections are tight to prevent leaks. Open the angle valve to the maximum and check for any water leakage.

6. Strømtilslutning

Plug the toilet's power cord into a grounded electrical outlet. The toilet will perform an initial self-check.

Betjeningsvejledning

Your WinZo Smart Toilet offers a range of features for enhanced comfort and hygiene.

Automatiske funktioner

• Automatisk åbning/lukning: Låget åbner automatisk, når du nærmer dig, og lukker efter brug.
• Fodsensor: A foot sensor allows for hands-free lid opening and flushing when you walk away.

Figur 3: The toilet lid automatically opening upon approach.

Figur 4: Foot sensor for hands-free operation.

Display og belysning

• LED display: The HD LED screen shows real-time water, seat, and drying temperatures.
• Natlys: An integrated night light provides subtle illumination for nighttime use.

Figur 5: LED display for temperature and settings.

Figur 6: Night light illuminating the toilet bowl.

Washing and Drying Functions

• Multiple Washing Modes: Includes Rear Washing, Front Washing, Lady Care, Powerful Washing, and Massage Washing.
• Justerbare indstillinger: Water temperature, water pressure, dryer temperature, and seat temperature can be adjusted via the remote control.
• Opvarmet sæde: The seat provides adjustable warmth for comfort.
• Varmlufttørring: A warm air dryer reduces the need for toilet paper.

Figur 7: Bidet nozzle performing multi-cleaning functions.

Figur 8: Opvarmet sæde med justerbare temperaturindstillinger.

Figur 9: Warm air drying feature.

Side Knob Operation

The side knob provides an alternative method for basic operations.

Figur 10: Side knob for manual control.

Opretholdelse

Regelmæssig rengøring og vedligeholdelse vil sikre dit smarte toilets levetid og optimale ydeevne.

• Generel rengøring: Use a soft cloth and mild, non-abrasive cleaner to wipe down the exterior surfaces. Do not use harsh chemicals or abrasive pads.
• Rengøring af dyse: The bidet nozzle has a self-cleaning function. For deeper cleaning, refer to the remote control instructions for manual nozzle extension and cleaning.
• Filtervedligeholdelse: Periodically check and clean the water inlet filter to prevent blockages and maintain water pressure.

Fejlfinding

Hvis du støder på problemer, kan du se tabellen nedenfor for almindelige problemer og deres løsninger.

Specifikationer

Garanti og support

WinZo products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official WinZo website. Do not attempt to repair the product yourself, as this may void the warranty and pose safety risks.