tectake Swivel Dining Chair

Indledning

Thank you for choosing the tectake Swivel Dining Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

This elegant swivel armchair features a fine velvet cover, designed for comfort and style in your dining room or living area.

Sikkerhedsinstruktioner

• Sørg for, at alle dele er til stede og ubeskadigede før montering. Må ikke anvendes, hvis nogen af ​​delene mangler eller er i stykker.
• Saml stolen på en blød, ren overflade for at forhindre ridser.
• Tighten all screws and bolts securely. Periodically check and re-tighten fasteners to ensure stability.
• Stå ikke på stolen, og brug den ikke som skammel.
• Overskrid ikke den anbefalede maksimale vægt på 120 kg (ca. 264 lbs).
• Hold børn væk fra små dele under monteringen.
• Undgå at udsætte stolen for direkte sollys eller ekstreme temperaturer for at forhindre materialenedbrydning.
• Use only mild cleaning agents and avoid abrasive materials that could damage the velvet upholstery.

Pakkens indhold

Kontroller venligst, at alle nedenstående komponenter er inkluderet i din pakke:

• 1 x Chair Seat (Velvet Upholstered)
• 1 x Swivel Base Mechanism
• 4 x Chair Legs (Black Powder-Coated Steel)
• 1 x Hardware Pack (Screws, Washers, Allen Key)
• 4 x Adjustable Foot Pads

Opsætning og montering

Follow these steps to assemble your tectake Swivel Dining Chair:

1. Trin 1: Forbered komponenterne

   Unpack all components and lay them out on a soft, clean surface to prevent damage. Identify the chair seat, swivel base, legs, and hardware pack.

   

   Billede: Forside view of the fully assembled tectake Swivel Dining Chair, showcasing its grey velvet upholstery and black metal legs.

2. Step 2: Attach the Swivel Mechanism to the Seat

   Carefully place the chair seat upside down. Align the swivel base mechanism with the pre-drilled holes on the underside of the seat. Secure it using the provided screws and washers from the hardware pack. Ensure the mechanism is centered and firmly attached.

   

   Billede: Nærbillede view of the underside of the chair seat, showing the circular swivel mechanism attached to the base.

3. Step 3: Attach the Legs to the Swivel Base

   Attach each of the four chair legs to the designated points on the swivel base. Use the remaining screws and the Allen key provided. Tighten each screw firmly, but do not overtighten. The legs should splay outwards slightly for stability.

   

   Image: Detail of the black metal chair legs, showing the square profile and the adjustable foot pads at the bottom.

4. Trin 4: Installer justerbare fodpuder

   Screw the adjustable foot pads into the bottom of each leg. These pads help protect your floor and allow for minor leveling adjustments on uneven surfaces.

5. Trin 5: Endelig kontrol

   Once all components are assembled, gently turn the chair upright. Test its stability by applying light pressure. Ensure all connections are secure. If the chair wobbles, adjust the foot pads until it is stable.

Betjeningsvejledning

The tectake Swivel Dining Chair is designed for comfortable seating and ease of movement.

• Drejefunktion: The chair seat is equipped with a 360-degree swivel mechanism, allowing you to rotate freely without moving the base. This is ideal for dynamic environments or easy conversation.
• Siddepladser: Sit centrally on the chair to distribute weight evenly and ensure stability.

Image: The tectake Swivel Dining Chair positioned in a modern living space next to a large window, demonstrating its aesthetic appeal and functional design.

Vedligeholdelse og pleje

Korrekt pleje vil forlænge din stols levetid og udseende:

• Fløjlsbetræk:
  • Støvsug regelmæssigt fløjlsstoffet med en blød børste for at fjerne støv og snavs.
  • Tør straks spildt væske med en ren, tør klud. Gnid ikke, da dette kan sprede pletten og beskadige luven.
  • For deeper cleaning, use a mild, water-free solvent or dry-cleaning product specifically designed for velvet. Test on an inconspicuous area first.
  • Avoid using harsh chemicals, bleach, or abrasive cleaners.
• Metalben: Tør metalbenene af med en blød kludamp klud. Tør straks for at forhindre vandpletter eller rust.
• Generel: Periodically check all screws and bolts and re-tighten them as necessary to maintain structural integrity.

Image: A detailed close-up of the grey velvet fabric, showing its soft texture and subtle sheen.

Fejlfinding

Specifikationer

Garanti og support

Your tectake Swivel Dining Chair is covered by a 30 dages returret from the date of purchase. This policy covers manufacturing defects and issues arising from normal use.

For warranty claims, missing parts, or technical support, please contact the seller directly:

Seller: tectake nederland

Please have your purchase details and model number (405334) ready when contacting support to expedite the process.

For more information, you may visit the seller's page on Amazon: tectake nederland Seller Page