HOMCOM 3-Piece Bar Table and Chairs Instruction Manual

1. Vigtige sikkerhedsoplysninger

Please read and understand all safety information before assembling or using this product. Failure to follow these instructions may result in injury or product damage.

• Saml altid i henhold til de medfølgende instruktioner.
• Do not exceed the weight limit of 264 lbs for the stools and 132 lbs for the table.
• This product is intended for adult use and may not be suitable for children due to the high seat height and potential tip-over risks.
• Keep the area around the table and chairs clear of obstacles to prevent tip-over.
• Always supervise children when they are near the table and chairs.

2. Produktet er slutview og funktioner

The HOMCOM 3-Piece Bar Table and Chairs set is designed for small spaces, offering a functional and stylish dining solution. This set includes one rectangular bar table and two matching bar stools.

Image 2.1: The complete HOMCOM 3-Piece Bar Table and Chairs set in an oak finish.

Image 2.2: The bar table and stools neatly tucked into a small kitchen area.

Nøglefunktioner:

• Pladsbesparende design: The set includes a rectangular bar table and two matching barstools. Stools can be stored under the table when not in use, ideal for compact living spaces.
• Comfortable Bar Stools: Features tall, high-back stools with built-in footrests for enhanced comfort during use.
• Holdbar konstruktion: Made with high-quality MDF (Medium-Density Fiberboard) tops and a galvanized steel frame, ensuring stability and longevity.
• Let at rengøre: The particle board table top is wrapped with a melamine sticker, allowing for easy cleaning with a damp klæde.
• Alsidig brug: Suitable for creating a breakfast nook, a small dining area, or an additional surface in various rooms.

3. Monteringsvejledning

Assembly is required for this product. Please ensure all parts are present before beginning assembly. It is recommended to assemble on a soft, clean surface to prevent scratching.

Nødvendige værktøjer (ikke inkluderet):

• Phillips skruetrækker
• Allen wrench (often included with hardware, check packaging)

Trin for generalforsamling:

1. Udpak og identificer dele: Carefully unpack all components and hardware. Refer to the parts list in your packaging to ensure everything is accounted for.
2. Saml bordrammen: Connect the table legs and support bars using the provided screws and tools. Do not fully tighten screws until the entire frame is assembled.
3. Fastgør bordplade: Secure the table top to the assembled frame. Ensure it is aligned correctly before tightening all screws.
4. Assemble Stool Frames: For each stool, connect the legs, seat supports, and footrests. Again, do not fully tighten screws initially.
5. Attach Stool Seats and Backrests: Secure the seat and backrest components to the stool frames.
6. Endelig stramning: Once all components are loosely assembled, place the table and stools on a level surface. Systematically tighten all screws and bolts. Avoid over-tightening.

Image 3.1: Close-up of the metal frame, highlighting connection points for assembly.

Image 3.2: The table surface, indicating where the top attaches to the frame.

4. Betjeningsvejledning

This bar table and chairs set is designed for general indoor use as a dining or casual seating area.

• Placering: Position the table and chairs on a flat, stable surface to prevent wobbling.
• Vægtfordeling: Distribute weight evenly on the table surface. Avoid placing heavy objects on the edges.
• Brug af afføring: Use stools for seating only. Avoid standing on them or using them as step stools.
• Pladsbesparelse: When not in use, slide the stools completely under the table to maximize floor space.

5. Vedligeholdelse og pleje

Proper care will extend the life and appearance of your HOMCOM bar table and chairs.

• Rensning: Tør af med annonceamp klud. Undgå skrappe kemikalier eller slibende rengøringsmidler, der kan beskadige overfladen.
• Spild: Clean up spills immediately to prevent staining, especially on the table surface.
• Inspektion: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er spændte. Spænd dem igen om nødvendigt.
• Miljø: Avoid prolonged exposure to direct sunlight or extreme temperatures and humidity, which can cause warping or fading.

6. Fejlfinding

If you encounter any issues with your bar table and chairs, please refer to the following common solutions:

• Vendebord/tabuer:
  • Sørg for, at alle skruer og bolte er forsvarligt spændt.
  • Verify the product is placed on a level surface. Adjust floor glides if present.
• Vanskeligheder under montering:
  • Review the assembly instructions carefully, paying attention to part orientation.
  • Do not fully tighten screws until all components are loosely fitted.
• Beskadigede eller manglende dele:
  • Contact HOMCOM customer support with your model number and a description of the issue.

7. Produktspecifikationer

Image 7.1: Dimensional drawing with key measurements and weight limits.

8. Garanti og support

For warranty information, replacement parts, or further assistance, please contact HOMCOM customer support.

You can visit the official HOMCOM store for more information and support resources:

Visit the HOMCOM Store