1. Introduktion og sikkerhedsoplysninger
Tak for købetasing the Amewi AMXRock Caballo 22670 RC Crawler. This manual provides essential information for the safe operation, setup, and maintenance of your new remote-controlled vehicle. Please read this manual thoroughly before operating the product to ensure proper function and to prevent damage or injury.
1.1 Generelle sikkerhedsretningslinjer
- Kør altid køretøjet i åbne områder væk fra mennesker, kæledyr og forhindringer.
- Må ikke anvendes i nærheden af offentlige veje, elledninger eller vandløb.
- Hold hænder, hår og løstsiddende tøj væk fra bevægelige dele.
- This product is not a toy. It is intended for users aged 14 years and older.
- Never disassemble or modify the vehicle or remote control.
- Ensure all batteries are charged correctly and safely.
- Store the vehicle and remote control in a dry, cool place when not in use.
2. Pakkens indhold
Carefully unpack all items and check against the list below. If any components are missing or damaged, please contact your retailer or Amewi support.
- Amewi AMXRock Caballo 22670 RC Crawler
- 2.4GHz fjernbetjening
- Rechargeable Vehicle Battery
- Batterioplader
- Instruktionsmanual (dette dokument)
Note: Batteries for the remote control are typically not included and must be purchased separately (e.g., AA batteries).
3. Opsætning
3.1 Opladning af køretøjets batteri
Before first use, fully charge the included vehicle battery using the provided charger. Refer to the charger's specific instructions for charging times and indicators. Always supervise charging and disconnect the battery once fully charged.
3.2 Installation af batterier i fjernbetjeningen
Open the battery compartment on the back of the remote control. Insert the required batteries (e.g., 4x AA batteries, not included) ensuring correct polarity. Close the compartment securely.
Image: The 2.4GHz remote control for the Amewi AMXRock Caballo 22670, showing its ergonomic design and control layout.
3.3 Montering af køretøjets batteri
Locate the battery compartment on the vehicle, typically under the body shell. Securely connect the charged vehicle battery to the vehicle's power connector. Ensure the battery is properly seated and secured to prevent movement during operation. Reattach the body shell if removed.
Billede: Side view of the Amewi AMXRock Caballo 22670 RC Crawler, highlighting its robust chassis and large off-road tires.
4. Betjeningsvejledning
4.1 Tænd/sluk
- Turn on the remote control first. The indicator light should illuminate.
- Turn on the vehicle's power switch. The vehicle's lights or indicator should illuminate.
- The remote control and vehicle should automatically pair. If not, refer to the troubleshooting section.
- To power off, turn off the vehicle first, then the remote control.
4.2 Kørekontroller
- Gashåndtag: Pull the trigger to move forward, push it away to brake or reverse.
- Rat: Drej rattet til venstre eller højre for at styre køretøjet.
4.3 2-trins gearkasse
The AMXRock Caballo features a 2-speed transmission, controllable directly from the transmitter. This allows you to switch between a high-speed gear for open terrain and a low-speed gear for maximum torque and control during technical crawling. Consult your remote control's specific button layout for the gear shift function.
4.4 Individual Differential Locks
The vehicle is equipped with individual differential locks, which can be engaged or disengaged from the transmitter. Locking the differentials provides increased traction and climbing ability, especially on very difficult or uneven terrain. Unlock them for better turning radius and less stress on the drivetrain on smoother surfaces. Refer to your remote control's specific button layout for differential lock controls.
4.5 Functional Winch
A functional winch is installed under the model body. This can be controlled from the transmitter to assist in recovery situations, such as pulling the vehicle out of mud or over obstacles. Ensure the winch cable is properly spooled and free of tangles before use. Consult your remote control's specific button layout for winch operation.
Billede: Forside view of the Amewi AMXRock Caballo 22670, showcasing the front bumper, LED headlights, and the integrated winch.
4.6 LED-belysningssystem
The vehicle features a comprehensive LED lighting system, including front/rear lights, turn signals in rearview mirrors, brake lights, reversing lights, and roof lights. These functions are controllable via the transmitter, enhancing realism and visibility during operation. Refer to your remote control's specific button layout for lighting controls.
Billede: Bagpå trekvart view of the Amewi AMXRock Caballo 22670, showing the detailed rear lights, spare tire, and roof rack.
5. Vedligeholdelse
5.1 Rengøring
- Rengør køretøjet efter hver brug, især under snavsede eller våde forhold.
- Brug en blød børste eller trykluft til at fjerne snavs og affald fra chassis, affjedring og drivlinje.
- Tør kroppen af med adamp klæde. Brug ikke skrappe kemikalier.
5.2 Eftersyn
- Kontrollér regelmæssigt alle skruer og fastgørelseselementer for fastspænding.
- Inspect tires for wear and ensure they are securely mounted.
- Kontroller affjedringskomponenter for skader eller for meget slør.
- Sørg for, at alle elektriske forbindelser er sikre og fri for korrosion.
5.3 Smøring
Periodically lubricate moving parts, especially the gantry axles with metal gears and CVD drive shafts, to ensure smooth operation and reduce wear. Use RC-specific lubricants as recommended by Amewi or your retailer.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Køretøjet reagerer ikke | Lavt batteri i bilen Lave batterier i fjernbetjeningen Ikke parret korrekt Power switches off | Charge vehicle battery Udskift fjernbetjeningens batterier Turn off both, then turn on remote first, then vehicle Sørg for, at begge tænd/sluk-knapper er tændt |
| Poor range or interference | Andre 2.4 GHz-enheder i nærheden Forhindringer blokerende signal | Move to a different location Ensure clear line of sight to vehicle |
| Køretøjet trækker til den ene side | Steering trim not adjusted Beskadigede styrekomponenter | Adjust steering trim on remote control Inspect steering linkage for damage |
| Winch not operating | Winch power off Kabelfiltret | Ensure winch function is activated on remote Untangle cable, ensure free movement |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Amewi |
| Modelnavn | AMXRock Caballo |
| Modelnummer | 22670 |
| Skala | 1: 14 skala |
| Drive System | 4WD (firehjulstræk) |
| Motortype | Børstet elektrisk |
| Smitte | 2-Speed (Controllable via Transmitter) |
| Aksler | Gantry axles with greased metal gears and CVD drive shafts |
| Differential Locks | Individual, controllable via Transmitter |
| Særlige funktioner | Functional Winch, Front/Rear LED Lighting with Turn Signals, Brake Lights, Reversing Lights, Roof Lights |
| Fjernbetjening | 2.4GHz Operation |
| Materiale Type | Plast |
| Farve | Metallisk sort |
| Varens vægt | 3813 gram |
| Dimensioner (L x B x H) | 568 mm x 250 mm x 255 mm (22.36 x 9.84 x 10.04 tommer) |
| Montering påkrævet | Ja |
| Anbefalet alder | 14 år og opefter |
8. Garanti og support
Amewi products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your retailer. If you encounter any issues or require technical assistance, please contact Amewi customer support through their official website or your point of purchase. Please have your model number (22670) and proof of purchase ready when contacting support.