JINJUNYE Countertop Ice Maker User Manual

1. Vigtige sikkerhedsinstruktioner

Please read all instructions carefully before using your JINJUNYE Ice Maker. Keep this manual for future reference.

• Elektrisk sikkerhed: Ensure the ice maker is connected to a grounded power outlet. Do not use if the power cord is damaged.
• Advarsel om kølemiddel: This appliance contains flammable refrigerant. Do not puncture the refrigerant tubing. Do not use mechanical devices or other means to defrost the ice maker.
• Placering: Placer ismaskinen på en stabil, plan overflade væk fra direkte sollys og varmekilder. Sørg for tilstrækkelig ventilation omkring enheden.
• Indledende opsætning: After receiving the ice maker, allow it to stand upright for at least 24 hours before plugging it in and operating. This allows the refrigerant to settle.
• Vandkvalitet: Use only potable drinking water.
• Rensning: Tag altid stikket ud af stikkontakten før rengøring.
• Børn: Hold børn væk fra ismaskinen under drift.

2. Produktet er slutview

The JINJUNYE Countertop Ice Maker is designed for convenience and efficiency, producing bullet-shaped ice cubes quickly.

Nøglekomponenter:

• Kontrolpanel: Features indicator lights for "Add Water", "Ice Full", "Power", and buttons for "On/Off" and "Select" ice size (S/L).
• Iskurv: Removable basket for collecting and storing ice cubes.
• Ice Scoop: Included for easy ice retrieval.
• Vandreservoir: Located beneath the ice basket, with a maximum fill line.
• Bundprop: Located at the bottom for draining water during cleaning.

Funktioner:

• Hurtig isfremstilling: Produces 9 bullet-shaped ice cubes in approximately 6 minutes. Max production up to 35 pounds per day.
• Two Ice Sizes: Choose between small (S) and large (L) bullet ice cubes.
• Selvrensende funktion: Simplifies maintenance with an automated cleaning cycle.
• Intelligente sensorer: Automatically stops ice production when the ice basket is full or when the water level is low, indicated by corresponding lights.
• Bærbart design: Compact dimensions (8.7"W x 11.34"D x 11.42"H) make it suitable for various locations.
• Støjsvag drift: Designed to operate quietly.

Figure 2.1: Control Panel and Indicator Lights.

Figure 2.2: Two Available Ice Cube Sizes.

3. Opsætning

1. Pakker ud: Tag forsigtigt ismaskinen ud af emballagen.
2. Hvileperiode: Place the unit upright on a flat, stable surface. Allow it to rest for at least 24 hours before plugging it in. This is crucial for the compressor's longevity.
3. Ren: Before first use, clean the interior of the ice maker and the ice basket with a soft cloth and mild detergent. Rinse thoroughly.
4. Tilsæt vand: Open the lid and remove the ice basket. Fill the water reservoir with potable drinking water up to the "MAX" fill line. Do not overfill.
5. Replace Basket: Place the ice basket back into the unit.
6. Tilslut: Tilslut netledningen til en jordet stikkontakt.

Figure 3.1: Initial Setup Steps.

4. Betjeningsvejledning

At lave is:

1. Ensure the unit is set up as per Section 3.
2. Press the "ON/OFF" button to turn on the ice maker. The "Power" indicator light will illuminate.
3. Press the "SELECT" button to choose your desired ice cube size: "S" for small or "L" for large. The corresponding indicator light will illuminate.
4. The ice maker will begin the ice-making cycle. The first batch may take slightly longer.
5. When the ice basket is full, the "ICE FULL" indicator light will turn on, and the machine will automatically pause. Remove ice to resume production.
6. If the "ADD WATER" indicator light illuminates, the water reservoir is low. Add more water to continue ice production.

Figure 4.1: Control Panel in Operation.

5. Vedligeholdelse

Selvrensende funktion:

1. Sørg for, at ismaskinen er tømt for is og vand.
2. Add clean water to the reservoir up to the "MAX" fill line.
3. Long press the "ON/OFF" button for 5 seconds to activate the self-cleaning mode. The "S" and "L" indicator lights will blink consecutively.
4. The self-cleaning cycle typically lasts for 15 minutes.
5. Once the cycle is complete, drain the water by removing the drain plug located at the bottom of the unit.
6. It is recommended to perform the self-cleaning function once a month, especially in hard water areas.

Generel rengøring:

• Tør regelmæssigt ydersiden af ​​med en blød, tør klud.amp klæde.
• Clean the interior components, including the ice basket and water reservoir, with a mild detergent and warm water. Rinse thoroughly to remove any soap residue.
• Ensure all parts are dry before reassembling and operating the unit.

Figure 5.1: Self-Cleaning Function Steps.

Figure 5.2: Hard Water Impact on Ice Maker (Descaling Recommendations).

6. Fejlfinding

7. Specifikationer

• Mærke: JINJUNYE
• Model: B0D3PYN3L3
• Isproduktionskapacitet: Up to 35 lbs/day
• Ice Cube Production Time: 9 terninger på 6 minutter
• Isopbevaringskapacitet: 2.3 lbs
• Vandtankkapacitet: 1.5 L
• Ice Cube Shape: Kugle
• Isterningstørrelser: Small (S), Large (L)
• Dimensioner (B*D*H): 8.7 cm x 11.34 cm x 11.42 cm
• Funktioner: Self-cleaning, Intelligent Infrared Sensors, Low Noise

8. Garanti og support

JINJUNYE products are manufactured to the highest quality standards. For warranty information, technical support, or any questions regarding your ice maker, please refer to the contact information provided on the product packaging or visit the official JINJUNYE webwebsted.

Always ensure you have your model number (B0D3PYN3L3) and purchase date available when contacting support.