Backnets Shower Valve with Digital Temperature Display

1. Introduktion

Thank you for choosing the Backnets Shower Valve with Digital Temperature Display. This advanced shower diverter valve kit is designed for concealed in-wall mounting, offering precise temperature control and a real-time digital display for enhanced comfort and safety. Constructed from solid brass with a brushed gold finish, it ensures durability and a luxurious aesthetic. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your shower valve.

2. Sikkerhedsoplysninger

• Sluk altid for hovedvandforsyningen, inden du påbegynder installation eller vedligeholdelse.
• Sørg for, at alle forbindelser er sikre og vandtætte for at forhindre lækager.
• Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret VVS-installatør.
• Perform a pressure test after installation to check for leaks and ensure system integrity.
• The digital display is hydro-powered; no batteries or external power are required.

3. Produktet er slutview og komponenter

The Backnets Shower Valve features a robust design with a digital temperature display for precise control. Key components include the main valve body, the control knob with integrated digital display, and the faceplate.

Figur 3.1: Forside view of the Backnets Shower Valve, showcasing the brushed gold finish and the digital temperature display on the control knob.

Figure 3.2: Dimensions of the shower valve, indicating its compact size for concealed installation.

Figure 3.3: The digital display shows real-time water temperature, powered by water flow without external batteries.

Figure 3.4: The pressure balance valve cartridge ensures steady water pressure and features an anti-scalding function.

Figure 3.5: Comparison highlighting the high-quality, integrated forged solid brass construction of the Backnets valve for superior durability and corrosion resistance.

4. Installationsvejledning

This shower valve is designed for concealed in-wall mounting. Professional installation is recommended.

4.1 Trin før installation

1. Sørg for, at alle nødvendige værktøjer og komponenter er tilgængelige.
2. Sluk for hovedvandforsyningen til installationsområdet.
3. Prepare the wall opening according to the valve's dimensions for a secure fit.

4.2 Tilslutning af vandledninger

• The valve is designed with standard 3/4" pipe inlet and 1/2" pipe outlet.
• Connect the hot water supply to the designated hot inlet (typically marked red or 'H').
• Connect the cold water supply to the designated cold inlet (typically marked blue or 'C').
• Connect the outlet pipes to your desired shower fixtures (e.g., rain shower head, body jets, handheld shower).

Figur 4.1: Eksample connection diagram for a rain shower head setup.

Figur 4.2: Eksample connection diagram for a handheld shower setup.

Figur 4.3: Eksample connection diagram for body jets or a tub spout setup.

4.3 Tryktest

After installing the shower valve, a pressure test is mandatory to ensure there are no leaks.

1. Block all outlets of the shower valve.
2. Adjust the water pressure to 10kg (1MPa) for testing.
3. Carefully check all water pipe connections and the interior of the shower valve for any signs of leakage.

Figure 4.4: Diagram illustrating the pressure test procedure for the shower valve.

4.4 Slutsamling

1. Once the pressure test is successful and no leaks are detected, install the faceplate and control knob.
2. Ensure the faceplate is flush with the finished wall and securely fastened.

5. Betjeningsvejledning

The Backnets Shower Valve provides intuitive control over water flow and temperature, with a convenient digital display.

5.1 Turning On/Off and Temperature Adjustment

• To turn on the water, rotate the main control knob. The digital display will illuminate and show the real-time water temperature.
• Rotate the knob clockwise for colder water and counter-clockwise for warmer water. The digital display will update instantly, allowing precise temperature selection.
• To turn off the water, rotate the knob back to the 'OFF' position.

5.2 Single Function Control

This valve is designed as a single-function diverter, meaning it can operate one water outlet at a time. If multiple outlets are connected, you will need to select the desired outlet via an external diverter or by connecting only one outlet to the valve.

Figure 5.1: The single-function valve allows operation of one connected shower component at a time.

6. Vedligeholdelse

Regular cleaning and maintenance will help preserve the appearance and functionality of your shower valve.

• Rengøring af overfladen: Use a soft cloth and mild soap or a non-abrasive cleaner specifically designed for brass or brushed finishes. Avoid harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
• Digital skærm: The digital display panel is waterproof and easy to clean. Wipe gently with a damp klæde.
• Interne komponenter: The high-quality brass construction ensures longevity. If water flow issues or temperature inconsistencies occur, consult a professional plumber for inspection of internal components or cartridge replacement.

7. Fejlfinding

If you encounter issues with your Backnets Shower Valve, refer to the following common problems and solutions:

8. Specifikationer

9. Garanti og support

Backnets stands behind the quality of its products. For specific warranty information, please refer to the product packaging or contact Backnets customer support directly. If you require assistance with installation, troubleshooting, or parts, please visit the official Backnets webwebsted eller kontakt deres kundeserviceteam.

Kontaktoplysninger: Please refer to the contact details provided on the product packaging or the official Backnets webwebstedet for de mest opdaterede supportoplysninger.