tectake Arges ergonomisk kontorstol med lændestøtte (model 405323)

Indledning

Thank you for choosing the tectake Arges Ergonomic Office Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.

The tectake Arges office chair is designed to provide optimal seating comfort and support, helping to alleviate back issues during long periods of sitting. Its features include a height and angle-adjustable headrest, comfortable reclinable armrests, continuous height adjustment, breathable mesh fabric, and a height-adjustable lumbar support with adjustable tilt resistance.

Sikkerhedsinstruktioner

• Sørg for, at alle komponenter er til stede og ubeskadigede før montering. Må ikke anvendes, hvis der mangler eller er beskadigede dele.
• Saml stolen på en blød, ren overflade for at forhindre ridser.
• Stå ikke på stolen.
• Brug ikke stolen som skammel.
• Hold børn væk fra stolen under samling. Små dele kan være en kvælningsfare.
• The maximum load capacity for this chair is 120 kg (264 lbs). Do not exceed this weight limit.
• Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de er fastspændte. Efterspænd om nødvendigt.
• Undgå at udsætte stolen for direkte sollys eller ekstreme temperaturer i længere perioder.

Opsætning og montering

Follow these steps to assemble your tectake Arges office chair. It is recommended to have two people for assembly.

1. Udpak komponenter: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify all parts are present against the included parts list (refer to your product packaging for the complete list).
2. Fastgør hjul til basen: Sæt de fem hjul ind i hullerne for enden af ​​hvert ben på stolebasen. Tryk godt til, indtil de klikker på plads.
3. Indsæt gasløft: Placer gasløftecylinderen i det midterste hul på stolebasen.
4. Samling af sæde og ryglæn: Attach the backrest to the seat using the provided screws and tools. Ensure the orientation is correct.
5. Fastgør armlæn: Secure the armrests to the seat and backrest assembly using the designated screws.
6. Mount Mechanism: Attach the control mechanism to the underside of the seat using the appropriate screws. Ensure the lever is facing the front or right side for easy access.
7. Tilslut sæde til gaslift: Placer forsigtigt det samlede sæde på gasløftecylinderen, og sørg for, at det er centreret og stabilt.
8. Fastgør nakkestøtten: Slide the headrest into the designated slots at the top of the backrest and secure it.

After assembly, sit on the chair to ensure all components are securely connected and stable.

Betjeningsvejledning og justeringer

Your tectake Arges office chair offers several adjustment options to customize your seating experience for optimal comfort and ergonomic support.

Stolens højdejustering

To adjust the seat height (approx. 45-55 cm):

• For at hæve: Lift the lever located under the seat on the right side while taking your weight off the seat. The seat will rise automatically.
• For at sænke: Lift the lever while seated. The seat will lower under your weight. Release the lever at the desired height.

Backrest Tilt Function

The chair features a tilt function with adjustable resistance.

• Sådan aktiverer/deaktiverer du vipning: Pull out or push in the lever located under the seat (often the same lever as height adjustment, or a separate one).
• To adjust tilt resistance: Turn the round knob located under the front of the seat. Turn clockwise to increase resistance (making it harder to tilt) and counter-clockwise to decrease resistance (making it easier to tilt).

Justerbar lændestøtte

The lumbar support is height-adjustable to provide targeted support for your lower back.

• Grasp the lumbar support pad on the backrest and slide it up or down to your preferred position.

Image: Close-up of the adjustable lumbar support mechanism on the chair's backrest.

Justerbar nakkestøtte

The headrest can be adjusted in both height and angle.

• Højdejustering: Gently pull the headrest up or push it down to adjust its height.
• Vinkeljustering: Tilt the headrest forward or backward to find the most comfortable angle for your neck and head.

Image: Close-up of the adjustable headrest, showing its height and angle adjustment capabilities.

Reclinable Armrests

The armrests can be tilted backward to allow the chair to be pushed closer to a desk or for easier movement.

• Simply lift the armrests upwards to recline them. Push them back down to their original position.

Vedligeholdelse og pleje

Proper maintenance will extend the life of your tectake office chair.

• Rensning: Rengør stolen vha. adamp cloth. For stubborn stains, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners.
• Stofpleje: The breathable mesh fabric and padded seat can be gently wiped. Do not saturate with water.
• Rammepleje: Wipe metal and plastic parts with a damp klæde.
• Vedligeholdelse af hjul: Periodically check casters for hair or debris and clean them to ensure smooth movement.
• Fastgørelseskontrol: Regularly inspect all screws and bolts to ensure they are tight. Retighten as needed to maintain stability and safety.
• Opbevaring: If storing the chair for an extended period, keep it in a cool, dry place away from direct sunlight.

Fejlfinding

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact tectake customer support for assistance.

Specifikationer

Image: Detailed dimensions of the tectake Arges office chair.

Garanti og support

For warranty information or technical support, please refer to the purchase documentation or contact tectake customer service directly. Contact details can typically be found on the manufacturer's webwebstedet eller din købskvittering.

Fabrikant: tectake

Sælger: tectake nederland

Returpolitik: 30 dage