POPETPOP LED Aquarium Light Clip-on Fish Tank Lamp Brugermanual

Indledning

Thank you for choosing the POPETPOP LED Aquarium Light. This manual provides essential information for the safe and effective use of your new aquarium lampLæs venligst disse instruktioner omhyggeligt inden installation og betjening, og gem dem til senere brug.

Image: The POPETPOP LED Aquarium Light, featuring a flexible gooseneck, a circular LED head, an inline power switch, and a USB power cable with a clip for attachment.

Sikkerhedsoplysninger

• Ensure the power source is compatible with the device's USB input (3W).
• Do not immerse the light head or USB connector in water. This product is not submersible.
• Opbevares utilgængeligt for børn.
• Afbryd strømmen, før du udfører vedligeholdelse eller rengøring.
• Forsøg ikke at skille eller reparere enheden selv. Kontakt kvalificeret personale for service.
• Ensure the clip is securely attached to the aquarium wall to prevent accidental detachment.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• 1 x POPETPOP LED Aquarium Lamp

Billede: En detaljeret view of the light's components, showing the LED array, the USB plug, and the inline power switch.

Produktegenskaber

• Holdbar konstruktion: Made of plastic material, designed for wear resistance and safety in an aquatic environment.
• Fleksibel hals: Allows for easy adjustment of light angle and position.
• Sikkert klip: Designed for stable attachment to aquarium walls with a thickness between 2-5mm (0.08-0.2 inches).
• Farverigt LED-lys: Provides illumination that enhances fish colors and supports aquatic plant growth through comprehensive photosynthesis.
• Kompakt design: Small and lightweight, minimizing space usage.

Billede: Nærbillede views highlighting the safety of the materials and the practical design of the inline switch and LED light panel.

Opsætningsinstruktioner

1. Pak lyset ud: Carefully remove the LED aquarium light from its packaging.
2. Identificér monteringssted: Choose a suitable location on the edge of your aquarium where the light can be securely clipped. Ensure the aquarium wall thickness is between 2-5mm.
3. Vedhæft klippet: Align the light's clip with the aquarium wall and press down firmly to secure it in place. Ensure it is stable and does not wobble.
4. Placer lyset: Adjust the flexible neck to direct the light over your desired area of the aquarium.
5. Tilslut strøm: Plug the USB connector into a compatible USB power adapter (not included) or a USB port on another device.

Image: The LED aquarium light securely clipped to the edge of a fish tank, demonstrating proper installation and illumination.

Betjeningsvejledning

1. Tænd: Once the USB cable is connected to a power source, press the inline switch located on the cable to turn the light on.
2. Juster position: If needed, gently adjust the flexible neck to fine-tune the light's direction.
3. Sluk: Press the inline switch again to turn the light off.

Opretholdelse

• Rensning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the light head and flexible neck. Do not use abrasive cleaners or immerse any part of the light in water.
• Regelmæssig inspektion: Periodically check the USB cable for any signs of damage or wear. Ensure the clip remains securely attached to the aquarium.
• Opbevaring: If storing the light for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

Fejlfinding

Specifikationer

Image: A diagram illustrating the dimensions of the light, showing a length of 18cm (7.07in) and a head width of 4cm (1.57in).

Garanti og support

For warranty information or technical support, please refer to the retailer's policy or contact POPETPOP customer service through their official channels. Keep your purchase receipt as proof of purchase.

For yderligere hjælp kan du besøge POPETPOP Store on Amazon.