CREATE Warm Clear 2000W Electric Convector Heater with WiFi User Manual

1. Introduktion og sikkerhedsoplysninger

Thank you for choosing the CREATE Warm Clear 2000W Electric Convector Heater. This manual provides essential information for the safe and efficient operation of your new appliance. Please read these instructions carefully before use and retain them for future reference.

Vigtige sikkerhedsinstruktioner:

• Læs alle instruktioner, før du bruger denne varmeovn.
• Brug ikke denne varmeovn i umiddelbar nærhed af et badekar, bruser eller swimmingpool.
• Brug ikke denne varmeovn, hvis den er blevet tabt.
• Må ikke bruges, hvis der er synlige tegn på beskadigelse af varmeren.
• Hold børn under 3 år væk, medmindre de er under konstant opsyn.
• Børn i alderen fra 3 år og under 8 år må kun tænde/slukke for apparatet, forudsat at det er blevet placeret eller installeret i dens tilsigtede normale driftsposition, og de har fået opsyn eller instruktion i brugen af ​​apparatet på en sikker måde og forstå de involverede farer.
• Børn i alderen fra 3 år og under 8 år må ikke tilslutte, regulere og rengøre apparatet eller udføre brugervedligeholdelse.
• FORSIGTIGHED: Nogle dele af dette produkt kan blive meget varme og forårsage forbrændinger. Der skal lægges særlig vægt på, hvor børn og udsatte mennesker er til stede.
• Apparatet er ikke beregnet til at blive brugt af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner eller mangel på erfaring og viden, medmindre de har fået opsyn eller instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed.
• Dæk ikke varmelegemet til. Overophedning kan forekomme, hvis varmelegemet er dækket til.
• Sørg for, at netledningen ikke er beskadiget, og at den er placeret væk fra varmekilder.
• Denne varmeovn er kun designet til indendørs brug.

2. Produktet er slutview

The CREATE Warm Clear 2000W is a wall-mounted electric convector heater designed for rapid and efficient heating of spaces up to 20m². It features an X-shaped aluminum heating element, WiFi connectivity for app control, open window detection, and IP24 protection for enhanced safety.

Figur 1: Front view of the CREATE Warm Clear 2000W Electric Convector Heater. This image shows the sleek, white rectangular design of the heater, with the CREATE logo at the bottom and a small control panel visible on the right side.

3. Opsætning og installation

3.1 Udpakning

• Tag forsigtigt varmelegemet ud af emballagen.
• Kontroller for tegn på skader. Brug ikke produktet, hvis det er beskadiget, og kontakt kundesupport.
• Sørg for, at alle komponenter er til stede, før du bortskaffer emballagematerialerne.

3.2 Vægmontering

This heater is designed for wall-mounted installation. Ensure the chosen location is a flat, stable surface and allows for proper air circulation around the unit. Maintain minimum distances from walls and other objects as specified in the diagram below.

Figur 2: Dimensions and mounting clearances for the heater. The diagram illustrates the heater's height (995 mm), width (530 mm), and depth (82 mm), along with recommended clearances for safe installation.

1. Mark the desired mounting points on the wall according to the provided template or dimensions. Ensure the points are level.
2. Drill holes at the marked points and insert appropriate wall plugs (if necessary, depending on wall material).
3. Fastgør monteringsbeslaget til væggen ved hjælp af skruer.
4. Carefully hang the convector heater onto the mounting bracket, ensuring it is securely seated.
5. Ensure the heater is firmly attached to the wall and cannot be easily dislodged.

Figur 3: The CREATE Warm Clear 2000W heater installed on a wall in a living space. This image demonstrates the heater's discreet integration into a room's decor when wall-mounted.

3.3 Strømtilslutning

Once mounted, plug the heater into a suitable 240V electrical outlet. Ensure the outlet is easily accessible and not overloaded.

4. Betjeningsvejledning

4.1 Kontrolpanel overview

The heater can be operated using the integrated control panel located on the side of the unit or via the CREATE app.

Figur 4: Nærbillede view of the heater's control panel. This image highlights the buttons for power, mode selection, temperature adjustment (+/-), and timer settings.

• Tænd/sluk-knap (⏻): Tænder eller slukker for varmelegemet.
• Tilstandsknap (☰): Cycles through different heating modes (e.g., Comfort, Eco, Anti-freeze).
• Temperatur op (+): Øger den ønskede temperatur.
• Temperatur ned (-): Sænker måltemperaturen.
• Timer-knap (⏱): Sets or adjusts the operating timer.

4.2 Grundlæggende betjening

1. Press the Power Button (⏻) to turn the heater ON. The display will show the current room temperature.
2. Use the Temperature Up (+) and Temperature Down (-) buttons to set your desired temperature. The heater will automatically adjust its output to reach and maintain this temperature.
3. Press the Mode Button (☰) to select a heating mode. Refer to the display for the active mode.
4. To turn the heater OFF, press the Power Button (⏻) again.

4.3 WiFi-forbindelse og app-kontrol

The CREATE Warm Clear 2000W can be controlled remotely via the CREATE app on your smartphone.

1. Download the 'CREATE' app from your smartphone's app store (iOS or Android).
2. Opret en konto, eller log ind, hvis du allerede har en.
3. Follow the in-app instructions to add your new heater. This typically involves putting the heater into pairing mode (refer to the heater's display or specific app instructions) and connecting it to your home WiFi network.
4. Once connected, you can control the heater's power, temperature, modes, and set schedules from anywhere.

Figur 5: A user interacting with the CREATE app on a smartphone to control the convector heater. The app interface shows temperature settings and control options.

4.4 Åbn vinduesregistrering

This feature helps save energy. If the heater detects a sudden drop in room temperature, indicating an open window or door, it will automatically pause heating to prevent energy waste. Heating will resume once the temperature stabilizes or the window/door is closed.

4.5 Overophedningsbeskyttelse

The heater is equipped with an internal safety device that automatically switches off the unit in case of overheating. If this occurs, unplug the heater, allow it to cool down, and check for any obstructions to the air inlets or outlets before restarting.

5. Vedligeholdelse

5.1 Rengøring

• Tag altid stikket ud af stikkontakten, og lad varmelegemet køle helt af, inden rengøring.
• Tør de udvendige overflader af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Nedsænk ikke varmelegemet i vand, og lad ikke vand dryppe ind i det indre.
• Regularly clean the air inlets and outlets with a soft brush or vacuum cleaner to prevent dust buildup.

5.2 Opbevaring

If storing the heater for an extended period, ensure it is clean and dry. Store it in its original packaging in a cool, dry place, away from direct sunlight and moisture.

6. Fejlfinding

If you experience issues with your heater, please consult the following table before contacting customer support.

7. Specifikationer

8. Garanti og support

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact CREATE customer service through their official webwebstedet eller forhandleren, hvor produktet blev købt.