edx Ergonomic Mesh Office Chair CH3766G User Manual

1. Introduktion

Thank you for choosing the edx Ergonomic Mesh Office Chair. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal use and longevity of your chair. Please read this manual thoroughly before assembly and retain it for future reference.

2. Sikkerhedsoplysninger

• Sørg for, at alle komponenter er til stede og ubeskadigede før montering. Må ikke anvendes, hvis der mangler eller er dele i stykker.
• Saml stolen på en blød, ren overflade for at forhindre ridser.
• Overspænd ikke skruerne under montering.
• The maximum weight recommendation for this chair is 275 pund. Exceeding this limit may cause damage or injury.
• Hold børn og kæledyr væk under montering.
• Use the chair only for its intended purpose.

3. Pakkens indhold

Kontroller venligst, at alle følgende dele er inkluderet i din pakke:

• A: Backrest (x1)
• B: Seat Cushion (x1)
• C: Armrests (Left x1, Right x1)
• D: Mechanism (x1)
• E: Gas Lift (x1)
• F: Base (x1)
• G: Head Pillow (x1)
• H: Hjul (x5)
• I: Legs for Base (x5)
• J: Bolts for Backrest (x3)
• K: Bolts for Mechanism (x4)
• L: Bolts for Head Pillow (x2)
• M: Bolts for Armrests (x2)
• N: Bolts for Armrests (x4)
• O: Bolts for Base Legs (x10)
• P: Plastdæksel (x1)
• Q: Skruenøgle (x1)

4. Monteringsvejledning

For en visuel vejledning, se venligst den officielle installationsvideo nedenfor:

1. Trin 1: Saml stolebasen

   Divide the Base (F) into two parts. Using the Wrench (Q), install the 5 Legs (I) to the Base (F) with 10 Bolts (O). Then, press the 5 Casters (H) into the holes at the end of the Legs (I). Finally, place the Base Cover (part of F) back on the base and insert the Gas Lift (E) into the center hole of the Base (F).

   

   Billedbeskrivelse: Diagram showing the overall dimensions of the chair and its 275 lbs weight capacity. This image helps visualize the assembled base structure.

2. Trin 2: Fastgør armlænene til sædehynden

   Turn the Seat Cushion (B) upside down. Install the Left Armrest (C-L) and Right Armrest (C-R) to the Seat Cushion (B) using 2 Bolts (M) and 4 Bolts (N). Ensure the armrests are securely fastened. Note: The Seat (B) is marked with "FRONT"; please make sure the installation direction is correct.

3. Step 3: Attach Mechanism to Seat Cushion

   Attach the Mechanism (D) to the Seat Cushion (B) using 4 Bolts (K). Ensure the "FRONT" direction of the Mechanism (D) aligns with the "FRONT" direction of the Seat Cushion (B).

4. Step 4: Attach Backrest to Seat Assembly

   Align the screw holes of the Backrest (A) and the Mechanism (D). Using the Wrench (Q), secure both completely with 3 Bolts (J).

5. Trin 5: Tilslut sædeenheden til gasløfteren

   Align the hole on the Mechanism (D) with the Gas Lift (E). Carefully lower the assembled seat onto the Gas Lift and press down firmly until it is fully secured.

6. Step 6: Attach Head Pillow

   Using the Wrench (Q), attach the Head Pillow (G) to the Backrest (A) with 2 Bolts (L). Then, attach the Plastic Cover (P) to conceal the hole.

5. Operating Your Chair

5.1. Højdejustering

To adjust the chair's height, pull the lever located under the seat upwards. While pulling the lever, stand up to raise the chair or remain seated to lower it. Release the lever at the desired height.

5.2. Vippe- og vippefunktion

The chair features a 90°-135° rocking function. Use the lever under the seat to engage or disengage the rocking motion. The tension of the rocking can be adjusted by turning the round knob located under the seat.

Billedbeskrivelse: Illustration showing the chair's 90°-135° rocking range and the location of the recline lock/rocking tension knob and height adjustment lever.

5.3. Justerbar nakkestøtte

The headrest can be adjusted in height by 3.35 inches and rotated by 45 degrees to reduce neck pressure and provide optimal support.

Billedbeskrivelse: Visual representation of the headrest's adjustable height (3.35 inches) and reversible angle (45 degrees).

5.4. Justerbar lændestøtte

The ergonomic lumbar support is designed to conform to the natural curve of your lower back. It can be adjusted vertically by 1.96 inches and horizontally by 1.1 inches to provide personalized comfort and support.

Billedbeskrivelse: Detaljeret view of the adjustable and retractable lumbar support, highlighting its S-shaped design and vertical/horizontal adjustment capabilities.

5.5. Justering af armlæn

The armrests are 3D adjustable, allowing for height adjustments of 3.54 inches to suit your preference and desk height.

Billedbeskrivelse: Close-up showing the breathable resilient mesh fabric, thickened 4-inch sponge material of the seat, and the 3.54-inch adjustable height feature of the armrests.

6. Pleje og vedligeholdelse

• Rensning: Tør af med annonceamp klud. Undgå skrappe kemikalier eller slibende rengøringsmidler, der kan beskadige nettet eller stoffet.
• Inspektion: Kontrollér regelmæssigt alle bolte og skruer for at sikre, at de er stramme. Efterspænd om nødvendigt.
• Hjul: Hold hjulene fri for snavs for at sikre jævn rulning.
• Undgå direkte sollys: Prolonged exposure to direct sunlight may cause fading of the fabric and mesh.

7. Fejlfinding

• Stolen kan ikke justeres i højden: Ensure the gas lift lever is fully engaged and the gas lift is properly inserted into the base and mechanism.
• Stolens vakler: Check all bolts and screws, especially those connecting the base, mechanism, and armrests, and tighten them securely. Ensure the chair is on a flat, even surface.
• Hjul ruller ikke jævnt: Check for hair or debris wrapped around the caster wheels. Clean them thoroughly.
• Backrest feels loose: Verify that the bolts securing the backrest to the mechanism are tightened.

8. Produktspecifikationer

9. Garanti og support

edx values customer satisfaction. If you encounter any issues with your office chair, please do not hesitate to contact us. We are committed to providing a solution that meets your satisfaction.

For support, please refer to the contact information provided with your purchase or visit the official edx webwebsted.