TEOAYEAH 24V 6-Wheel UTV Ride-On Toy Instruction Manual

Indledning

This manual provides essential information for the safe and effective operation, assembly, and maintenance of your TEOAYEAH 24V 6-Wheel UTV Ride-On Toy. Please read all instructions carefully before use and retain this manual for future reference.

Figure 1: TEOAYEAH 24V 6-Wheel UTV Ride-On Toy.

Sikkerhedsoplysninger

WARNING: Adult supervision is required at all times. Always ensure the child wears appropriate safety gear, including a helmet.

• Anbefalet alder: 3-8 år.
• Maksimal belastningskapacitet: 110 lbs.
• Do not operate near stairs, hills, roads, or swimming pools.
• Sørg for, at alle forbindelser er sikre før hver brug.
• Only use the provided charger and battery.

Hvad er der i æsken

Verify all components are present before beginning assembly:

• 1x TEOAYEAH 24V 6x6 Electric UTV for Kids 4WD
• 1x Parental Remote Control
• 1x oplader
• Assembly Hardware (nuts, bolts, pins)
• Instruktionsmanual

Opsætning & montering

Follow these steps for proper assembly of your UTV. Refer to the assembly video for visual guidance.

Trin 1: Batteritilslutning

Locate the battery compartment. Connect the red terminal to the red wire and the black terminal to the black wire. Ensure a secure connection. The power light on the dashboard will illuminate if connected correctly.

Step 2: Front Axle & Rear Axle Assembly

Insert the front axle into its designated slots, ensuring it rotates freely. Secure with the provided nuts and washers. Repeat for the rear axle, ensuring proper alignment for wheel attachment.

Step 3: Wheels and Wheel Covers Assembly

Attach the EVA tires to the axles. Secure each wheel with its corresponding nut and then snap on the wheel covers. Ensure all wheels spin freely and are securely fastened.

Figure 2: The UTV features 6 high-quality EVA tires and 4 damping springs for superior shock absorption across various terrains.

Step 4: Front Guard & Steering Wheel Assembly

Install the front guard by aligning it with the designated slots and securing it. Attach the steering wheel to the steering column, ensuring it clicks into place. Connect any necessary wiring for horn and music functions. The steering wheel requires 4*AA batteries (not included).

Trin 5: Sædemontering

Place the seat onto the UTV frame, aligning the mounting points. Secure the seat with the provided screws. Ensure the 5-point safety belt is properly installed and adjustable.

Figure 3: The enlarged seat provides ample space and comfort for children up to 5.2ft tall and 110 lbs, secured by a 5-point safety belt.

Betjeningsvejledning

Your TEOAYEAH UTV offers both manual and parental remote control modes.

Manuel kontrol

The child can operate the UTV using the steering wheel and foot pedal. Ensure the power button is on and the forward/backward switch is set to the desired direction.

Forældre fjernbetjening

The 2.4G remote control allows parents to supervise and control the vehicle. It features 3-gear speed adjustment and a 'P' gear stop button for immediate halting in emergencies. The remote control requires 2*AAA batteries (not included).

Figure 4: The UTV offers dual control modes: manual operation by the child or parental control via the 2.4G remote.

Køretilstande

The UTV features a 4WD/2WD switch. 2WD (rear-wheel drive) is an energy-saving mode for longer playtime. Switching to 4WD activates all motors for maximum power and traction on rugged terrain.

Figure 5: Easily switch between 2WD for energy efficiency and 4WD for powerful performance on challenging surfaces.

Opladning

Connect the charger to the charging port located at the rear of the UTV. The charger indicator light will show charging status. A full charge typically takes 8-12 hours. Do not overcharge.

Opretholdelse

Regular maintenance ensures the longevity and safe operation of your UTV.

• Keep the UTV clean by wiping it with a damp klæde. Undgå at bruge skrappe kemikalier.
• Store the UTV in a dry, cool place away from direct sunlight when not in use.
• Charge the battery fully after each use and at least once a month during storage to prolong battery life.
• Kontrollér regelmæssigt alle skruer, møtrikker og forbindelser for at sikre, at de er stramme og sikre.

Fejlfinding

Specifikationer

Garanti & Support

For warranty information or technical support, please contact TEOAYEAH customer service directly. Refer to the product packaging or the official TEOAYEAH webwebsted for kontaktoplysninger.