SKMEI SKMEI-2020 Digital Analog Quartz Watch Instruction Manual

Produkt overview

The SKMEI-2020 is a versatile wristwatch featuring both digital and analog time displays, designed for various daily activities. It includes multiple functions such as three time zones, a stopwatch, alarm, and calendar, all housed in a durable, 30M water-resistant case.

Image: The SKMEI-2020 watch worn on a wrist, highlighting its unique square design with a blue transparent case and the combination of analog and digital displays.

Urkomponenter

Image: A detailed diagram illustrating the various buttons on the SKMEI-2020 watch and their corresponding functions, such as Light, Mode, Start/Stop, Time, and Reset.

1. LYS-knap (øverst til venstre): Aktiverer baggrundsbelysningen for det digitale display.
2. MODE-knap (nederst til venstre): Cycles through different modes (Time 2, Stopwatch, Alarm, Time 1 setting).
3. START/STOP-knap (øverst til højre): Used to start and stop the stopwatch, and adjust settings.
4. TIME Knob (Middle Right): Used to set the analog time. Pull out to adjust, push in to lock.
5. RESET-knap (nederst til højre): Resets the stopwatch, and used to confirm settings.

Opsætning

Indstilling af analog tid

1. Træk ud TIME knap (Middle Right button).
2. Rotate the knob to adjust the analog hour and minute hands to the desired time.
3. Skub på TIME knap back in to lock the analog time.

Setting Digital Time and Date (Time 1)

1. Fra den normale tidsvisning skal du trykke på MODE knap (Bottom Left) repeatedly until the digital display shows the time setting screen (usually flashing seconds).
2. Tryk på RESET knap (Bottom Right) to cycle through the setting items: seconds, hour, minute, month, date, day of week, 12/24H format.
3. Brug START/STOP-knap (Top Right) to increase the flashing value. Hold to rapidly advance.
4. Når alle indstillinger er justeret, skal du trykke på MODE knap for at afslutte indstillingstilstanden og vende tilbage til den normale tidsvisning.

Setting Time Zone 2 (Time 2)

1. Fra den normale tidsvisning skal du trykke på MODE knap until you reach the Time 2 display.
2. Hold RESET knap (Bottom Right) until the time digits begin to flash.
3. Tryk på RESET knap to select the hour or minute to adjust.
4. Brug START/STOP-knap (Top Right) to change the flashing value.
5. Tryk på MODE knap to save and exit Time 2 setting mode.

Betjeningsvejledning

Display Baggrundsbelysning

Tryk på LYS knap (Top Left) to illuminate the digital display for a few seconds. This is useful in low-light conditions.

Brug af stopuret

1. Tryk på MODE knap (Bottom Left) until the stopwatch mode is displayed (usually indicated by 'ST' or 'STOPW').
2. Tryk på START/STOP-knap (Øverst til højre) for at starte stopuret.
3. Tryk på START/STOP-knap igen for at sætte stopuret på pause.
4. For at genoptage, tryk på START/STOP-knap.
5. For at nulstille stopuret skal du sørge for, at det er sat på pause, og derefter trykke på RESET knap (Bottom Right).

Indstilling og brug af alarmen

1. Tryk på MODE knap (Bottom Left) until the alarm mode is displayed (usually indicated by 'AL' or 'ALARM').
2. Hold RESET knap (Bottom Right) until the alarm hour digits begin to flash.
3. Tryk på RESET knap for at vælge mellem time- og minutindstillinger.
4. Brug START/STOP-knap (Top Right) to adjust the flashing value.
5. Tryk på MODE knap for at gemme alarmtidspunktet.
6. For at aktivere/deaktivere alarmen skal du trykke på START/STOP-knap while in alarm mode (without holding RESET). An alarm icon will appear/disappear.
7. Når alarmen lyder, skal du trykke på en vilkårlig knap for at stoppe den.

12/24 timers format

During the digital time setting process (Time 1), you can toggle between 12-hour (with AM/PM indicator) and 24-hour formats using the START/STOP-knap when the 12/24H setting is flashing.

Opretholdelse

Vandtæthed (30M)

This watch is rated for 30 meters (3 ATM) water resistance. This means it is suitable for daily use, splashes, rain, and brief immersion in water. It is ikke egnet til svømning, dykning eller brusebad med varmt vand, da damp og temperaturændringer kan kompromittere tætningerne.

Image: The SKMEI-2020 watch partially submerged in water, visually representing its 30-meter water resistance capability.

Rensning

Tør uret regelmæssigt af med en blød, tør klud. Ved genstridigt snavs, tør letamp en klud kan bruges, efterfulgt af øjeblikkelig tørring. Undgå barske kemikalier eller slibende materialer.

Udskiftning af batteri

When the display becomes dim or functions become erratic, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

Fejlfinding

• Det digitale display er blankt: Batteriet er muligvis afladet. Udskift batteriet.
• Analoge visere bevæger sig ikke: Check if the TIME Knob (Middle Right) is pushed in completely. If it is, the battery for the analog movement might be depleted, or there could be a mechanical issue.
• Tidspunktet er forkert: Re-set both the analog and digital times following the instructions in the Setup section. Ensure the 12/24H format is set correctly.
• Vand inde i uret: Immediately take the watch to a professional for inspection and repair to prevent further damage. Avoid pressing buttons while the watch is wet.
• Knapper reagerer ikke: Ensure the watch is not in a locked mode (if applicable, though this model does not feature a specific lock). If issues persist, a battery replacement or professional inspection may be needed.

Specifikationer

Garanti og support

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact SKMEI customer service directly through their official website or authorized retailers. Keep your purchase receipt as proof of purchase.