beyerdynamic MC 930 Condenser Microphone

1. Introduktion

The beyerdynamic MC 930 is a versatile true condenser microphone designed for a wide range of audio recording applications. Manufactured in Heilbronn, Germany, it offers high sensitivity, superb transient response, and features switchable pre-attenuation and a low-cut filter for enhanced flexibility in both studio and live sound environments.

This manual provides essential information for the proper setup, operation, and maintenance of your MC 930 microphone to ensure optimal performance and longevity.

2. Sikkerhedsinstruktioner

• Read all instructions carefully before using the microphone.
• Udsæt ikke mikrofonen for fugt, regn eller ekstreme temperaturer.
• Undgå at tabe mikrofonen eller udsætte den for kraftige stød.
• Only use the microphone with compatible audio equipment that provides 11-52 V phantom power.
• Do not attempt to open or modify the microphone. Refer all servicing to qualified personnel.
• Keep the microphone and its accessories out of reach of children.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• MC 930 Condenser Microphone
• Mikrofon Clamp (MA-CL 21)
• Bæretaske
• Forrude
• Microphone Cable (XLR)
• Measurement Curve Document

Image: The beyerdynamic MC 930 microphone mounted on a stand, ready for use.

4. Opsætning

4.1 Montering af mikrofonen

1. Attach the supplied microphone clamp (MA-CL 21) to a standard microphone stand.
2. Carefully screw the MC 930 microphone into the clamp. Ensure it is securely fastened but do not overtighten.

Billede: Nærbillede view of the MA-CL 21 microphone clamp, used for securing the MC 930 to a stand.

4.2 Tilslutning til lydudstyr

1. Connect the supplied XLR microphone cable to the XLR output at the base of the MC 930.
2. Tilslut den anden ende af XLR-kablet til en indgang på din lydmixer, lydkort eller forforstærker.amplivligere.
3. Ensure your audio equipment provides 11-52 V fantomkraft. The MC 930 requires phantom power to operate. Activate phantom power on the connected input channel.

4.3 Pre-attenuation and Low-Cut Filter

The MC 930 features two small switches on its body:

• Pre-attenuation Switch (-15 dB): This switch reduces the microphone's output level by 15 dB. Use this setting when recording very loud sound sources (e.g., drums, loud guitar amplifiers) to prevent input clipping on your mixer or interface.
• Low-Cut Filter Switch (80 Hz): This switch activates a high-pass filter at 80 Hz. Use this to reduce unwanted low-frequency noise such as rumble from air conditioning, stage vibrations, or proximity effect when close-miking.

Adjust these switches according to your recording environment and sound source.

5. Betjening af mikrofonen

5.1 Polarmønster

The MC 930 features a unidirectional (cardioid) polar pattern. This means it is most sensitive to sounds coming from the front and rejects sounds from the sides and rear. This characteristic is ideal for isolating a sound source and minimizing background noise or feedback in live settings.

5.2 Anbefalede anvendelser

The MC 930 is suitable for a variety of applications, including:

• Instrument Miking: Acoustic guitars, overheads for drums, percussion, strings, woodwinds, and brass instruments.
• Vokaloptagelse: Speech and singing, especially in controlled studio environments.
• Videooptagelse: Capturing clear audio for video productions.
• Live lyd: Reinforcement of instruments and vocals on stage.

5.3 Optimal placering

Experiment with microphone placement to achieve the desired sound. Generally, placing the microphone closer to the sound source will increase direct sound and reduce room ambience. Utilize the cardioid pattern by pointing the front of the microphone towards the desired sound and away from unwanted noise sources.

6. Vedligeholdelse

6.1 Rengøring

To clean the microphone, gently wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the finish or internal components. Avoid getting moisture into the microphone capsule or switches.

6.2 Opbevaring

When not in use, store the MC 930 in its supplied carrying case to protect it from dust, moisture, and physical damage. Store in a cool, dry place.

7. Fejlfinding

If you encounter issues with your MC 930 microphone, refer to the following common problems and solutions:

• Ingen lydoutput:
  • Ensure phantom power (11-52 V) is activated on the connected input channel.
  • Check all XLR cable connections for proper seating. Try a different XLR cable.
  • Verify the input gain on your mixer/interface is turned up.
  • Test mikrofonen på en anden indgangskanal eller med andet lydudstyr.
• Distorted or Clipped Sound:
  • Activate the -15 dB pre-attenuation switch on the microphone.
  • Reducer input gainen på din mixer/interface.
  • Øg afstanden mellem mikrofonen og lydkilden.
• Excessive Low-Frequency Noise/Rumble:
  • Activate the 80 Hz low-cut filter switch on the microphone.
  • Ensure the microphone is isolated from vibrations (e.g., use a shock mount, if available, or place the stand on a stable surface).
• Brummen eller summende støj:
  • Check for ground loops. Ensure all audio equipment is properly grounded.
  • Ensure XLR cables are balanced and in good condition. Avoid running audio cables parallel to power cables.
  • Test in a different electrical outlet or location to rule out external interference.

If problems persist after trying these steps, contact beyerdynamic customer support or an authorized service center.

8. Tekniske specifikationer

9. Garanti og support

For detailed information regarding the warranty period and terms for your beyerdynamic MC 930 microphone, please refer to the warranty card included with your product or visit the official beyerdynamic website. For technical support, service, or spare parts, please contact beyerdynamic customer service directly through their official channels.

Fabrikant: Beyerdynamic

For yderligere hjælp, besøg: www.beyerdynamic.com