Coleman Rugged Rechargeable 400L LED Lantern

Indledning

Thank you for choosing the Coleman Rugged Rechargeable 400L LED Lantern. This lantern is designed for durability and versatility, offering bright illumination for various outdoor activities. It features a built-in rechargeable battery, a USB charging port for mobile devices, and is water and impact-resistant. This manual provides essential information for the safe and efficient use of your lantern.

Sikkerhedsoplysninger

• Read all instructions before using the lantern.
• Do not immerse the lantern in water. It is water-resistant, not waterproof.
• Opbevares utilgængeligt for børn.
• Se ikke direkte ind i LED-lyset, da det kan forårsage midlertidig synsnedsættelse.
• Use only the provided charging cable and adapter, or a certified USB power source.
• Do not attempt to open or modify the lantern's internal components. This will void the warranty and may cause damage or injury.
• Bortskaf batterier i henhold til lokale regler.

Pakkens indhold

• Coleman Rugged Rechargeable 400L LED Lantern
• USB opladningskabel
• 120V vægoplader

Opsætning

Indledende opladning

1. Locate the charging port on the lantern, typically protected by a rubber flap.
2. Connect the small end of the USB charging cable to the lantern's charging port.
3. Connect the large end of the USB cable to the 120V wall charger, then plug the charger into a standard electrical outlet. Alternatively, connect the USB cable to any compatible USB power source.
4. Allow the lantern to charge fully before first use. A charging indicator light will typically show the charging status (e.g., red for charging, green for fully charged).

Optional D-Cell Battery Installation (CPX 6 System)

This lantern is compatible with the Coleman CPX 6 system, allowing the use of four D-cell batteries (sold separately) as an alternative power source if a CPX 6 rechargeable power cartridge is not used.

1. Twist the base of the lantern counter-clockwise to remove it.
2. Insert four D-cell batteries into the battery compartment, ensuring correct polarity (+/-).
3. Replace the base by aligning it and twisting clockwise until secure.

Betjeningsvejledning

Tænd/sluk og justering af lysstyrke

The lantern features a rotary knob or switch for power and brightness control.

1. Rotate the knob from the 'OFF' position to 'LOW' for a softer light output.
2. Continue rotating the knob to 'HIGH' for maximum brightness (400 lumens).
3. To turn off the lantern, rotate the knob back to the 'OFF' position.

Using the USB Charging Port (Power Bank Function)

Your lantern can also serve as a power bank to charge small electronic devices.

1. Åbn gummiklappen, der dækker USB-udgangsporten.
2. Connect your device's USB charging cable to the lantern's USB output port.
3. The lantern will begin charging your device. Note that using this feature will reduce the lantern's light runtime.
4. Disconnect your device once charged and close the rubber flap to protect the port from elements.

Carry Handle and Hanging

The lantern is equipped with a sturdy bail handle for easy carrying and versatile hanging options.

Use the handle to carry the lantern or hang it from a tent hook, branch, or other suitable support to illuminate a wider area.

Opretholdelse

Rensning

• Tør lanternen af ​​med adamp klud til at fjerne snavs og snavs.
• Do not use abrasive cleaners or solvents, as they may damage the finish or plastic components.
• Ensure all port covers are securely closed after cleaning to maintain water resistance.

Batteripleje

• For the built-in rechargeable battery, charge it fully every 3-6 months, even if not in use, to maintain battery health.
• If using D-cell batteries, remove them if the lantern will not be used for an extended period to prevent leakage.

Opbevaring

Opbevar lanternen på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.

Fejlfinding

Lanterne tænder ikke

• Tjek batteriopladning: Ensure the internal rechargeable battery is fully charged. If using D-cell batteries, check their charge and correct installation.
• Control Knob Position: Verify the control knob is rotated to 'LOW' or 'HIGH', not 'OFF'.

Lanterne lader ikke

• Kabelforbindelse: Ensure the USB charging cable is securely connected to both the lantern and the power source.
• Strømkilde: Confirm the 120V wall charger or USB power source is functioning correctly. Try a different outlet or USB port.
• Opladningsport: Check the lantern's charging port for any debris or damage.

Device Not Charging from Lantern's USB Port

• Lantern Battery Level: The lantern's internal battery may be too low to charge an external device. Charge the lantern first.
• Enhedskompatibilitet: Sørg for, at din enhed er kompatibel med standard USB-opladning.
• Kabelintegritet: Try a different USB cable for your device.

Specifikationer

Garantioplysninger

Coleman products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Coleman webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Kundesupport

If you have any questions, require assistance, or need to troubleshoot issues not covered in this manual, please contact Coleman customer support. Contact information can typically be found on the official Coleman webwebstedet eller på produktemballagen.