1. Introduktion
The Ingersoll Rand 135MAX HD Air Hammer is designed for heavy-duty applications, offering an optimized combination of power and speed. It features a feather-able trigger for precise control and a quick-change retainer for efficient chisel changes. This tool is engineered for durability and performance in demanding environments.
1.1 Sikkerhedsoplysninger
Always read and understand all safety warnings and instructions before operating this tool. Failure to follow warnings and instructions may result in serious injury. Keep this manual for future reference.
- Bær passende personlige værnemidler (PPE), herunder øjenbeskyttelse, høreværn og handsker.
- Sørg for, at lufttilførslen er afbrudt, før du skifter tilbehør eller udfører vedligeholdelse.
- Do not operate the tool if it is damaged.
- Hold arbejdsområdet rent og godt oplyst.
- Hold et fast greb om værktøjet under drift.
- Use only accessories designed for this tool.
2. Produktet er slutview
The Ingersoll Rand 135MAX Air Hammer is a robust tool featuring advanced design for enhanced performance and user comfort.
Figure 1: Ingersoll Rand 135MAX Air Hammer. This image shows the main unit of the air hammer, highlighting its compact design and ergonomic grip.
2.1 Nøglefunktioner
- Høj effekt: Delivers significant impact force for efficient material removal.
- Forbedret produktivitet: Equipped with a quick-change retainer for rapid chisel attachment changes.
- Præcis kontrol: Features a feather-able trigger for accurate power modulation across various tasks.
- Brugerkomfort: Designed with shock reduction and an anti-slip grip to minimize user fatigue during extended use.
Figure 2: Close-up of the air hammer showing the quick-change retainer mechanism and the feather-able trigger for enhanced control.
3. Opsætning
Proper setup ensures safe and efficient operation of your air hammer.
3.1 Tilslutning af luftforsyning
- Sørg for, at din luftkompressor er i stand til at levere det nødvendige lufttryk og den nødvendige mængde (se specifikationerne).
- Attach a suitable air fitting to the air inlet of the tool.
- Connect the air hose from the compressor to the tool's air fitting.
- Sørg for, at alle forbindelser er sikre og lækagefri.
3.2 Chisel Installation
- Afbryd lufttilførslen fra værktøjet.
- Pull back the quick-change retainer collar.
- Sæt den ønskede mejsel i værktøjets borepatron, indtil den sidder fast.
- Slip hurtigskifteholderkraven for at låse mejslen på plads. Træk forsigtigt i mejslen for at sikre, at den er sikkert fastgjort.
4. Betjeningsvejledning
Follow these steps for safe and effective operation of the Ingersoll Rand 135MAX Air Hammer.
- Ensure the work piece is securely clamped eller understøttet.
- Select the appropriate chisel for the task.
- Connect the air supply and set the air pressure to the recommended level.
- Position the chisel tip against the work surface at the desired angle.
- Press the feather-able trigger to begin operation. Start with light pressure and gradually increase as needed for the task.
- Maintain a firm grip on the tool and guide the chisel along the work path.
- Slip aftrækkeren for at stoppe driften.
- Disconnect the air supply when finished or before changing chisels.
Figure 3: An operator demonstrating the use of the 135MAX Air Hammer for automotive work, showcasing its application in a professional setting.
5. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din lufthammeres lange levetid og optimale ydeevne.
5.1 Smøring
- Apply a few drops of air tool oil into the air inlet before each use.
- If the tool is used continuously, lubricate every 2-3 hours of operation.
5.2 Rengøring og opbevaring
- After each use, disconnect the air supply and clean the tool with a dry cloth.
- Remove any debris from the chuck and retainer mechanism.
- Store the tool in a clean, dry environment, away from moisture and extreme temperatures.
5.3 Eftersyn
- Periodically inspect the air hose and fittings for wear or damage. Replace as necessary.
- Check chisels for sharpness and damage. Replace dull or damaged chisels.
6. Fejlfinding
This section addresses common issues you might encounter with your air hammer.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Værktøjet fungerer ikke eller fungerer svagt. |
|
|
| Overdreven vibration. |
|
|
| Luft lækker. |
|
|
7. Specifikationer
Technical specifications for the Ingersoll Rand 135MAX Air Hammer.
| Feature | Værdi |
|---|---|
| Mærke | Ingersoll Rand |
| Modelnummer | 135MAX |
| Strømkilde | Air-powered |
| Maximum Blows Per Minute (BPM) | 2600 BPM |
| Ampslette | 8 Amps (Note: Typically for electric tools, included as provided) |
| Produktmål (L x B x H) | 8.67 cm L x 2.22 cm B x 6.89 cm H |
| Materiale | Metal |
| Varens vægt | 4.4 pund (2 kilo) |
| Slaglængde | 3 tommer |
| Skafttype | Round Shank |
| Speciel funktion | Variable Speed (Feather-able Trigger) |
| Inkluderede komponenter | (1) 135MAX Air Hammer (Bare Tool) |
| UPC | 663023168012 |
8. Garanti og support
8.1 Garantioplysninger
The Ingersoll Rand 135MAX Air Hammer is backed by a 2-års garantiDenne garanti dækker materiale- og fabrikationsfejl ved normal brug. Gem venligst din købsbevis i tilfælde af garantikrav.
8.2 Kundesupport
For technical assistance, service, or warranty inquiries, please visit the official Ingersoll Rand website or contact their customer service department. Refer to the product packaging or the official brand webhjemmeside for de seneste kontaktoplysninger.
Du kan finde mere information og support på Ingersoll Rand-butik på Amazon.