1. Introduktion
This manual provides essential information for the assembly, operation, and maintenance of your tectake Canton Computer Desk 800993. Please read these instructions carefully before assembly and use to ensure safe and correct handling of the product. This computer desk is designed to provide a functional and stable workspace for home or office environments, featuring a spacious desktop and integrated side storage compartments.
Billede 1.1: Overview of the tectake Canton Computer Desk 800993, showcasing its industrial light wood finish and integrated shelving.
2. Sikkerhedsadvarsler
Warning: Assembly required. Exercise caution during mounting and when using the desktop.
- Sørg for, at alle komponenter er til stede og ubeskadigede, før monteringen påbegyndes.
- Saml skrivebordet på en blød, ren overflade for at forhindre ridser.
- Overspænd ikke skruerne, da dette kan beskadige materialet.
- Hold små dele væk fra børn under montering.
- Kontrollér jævnligt alle fastgørelseselementer for at sikre, at de forbliver stramme.
- Overskrid ikke den maksimale lastekapacitet, der er angivet i afsnittet 'Specifikationer'.
- Avoid placing hot items directly on the desktop surface without protection.
3. Pakkens indhold
Før montering skal du kontrollere, at alle nedenstående dele er inkluderet i pakken. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.
- Skrivebordspanel (1)
- Steel Frame Components (various)
- Side Shelf Panels (2)
- Justerbare fødder (4)
- Samlebeslag (skruer, bolte, unbrakonøgle)
- Instruktionsmanual (dette dokument)
4. Monteringsvejledning
Follow these steps carefully to assemble your tectake Canton Computer Desk. It is recommended to have two people for assembly.
- Udpak og identificer dele: Læg alle komponenter ud på en ren, blød overflade. Se på styklisten for at sikre, at alt er til stede.
- Saml hovedrammen: Connect the long horizontal steel bars to the vertical leg frames using the provided screws and Allen key. Ensure all connections are secure but do not fully tighten yet.
- Attach Side Shelf Supports: Secure the steel supports for the side shelves to the main frame as indicated in the diagram.
- Install Side Shelf Panels: Slide and secure the two side shelf panels onto their designated supports.
- Fastgør skrivebordspanel: Carefully place the desktop panel onto the assembled frame. Align the pre-drilled holes on the desktop with the holes on the frame. Secure the desktop using the appropriate screws.
- Installer justerbare fødder: Screw the four adjustable plastic feet into the bottom of the desk legs.
- Final Tightening and Leveling: Once all components are in place, fully tighten all screws. Adjust the plastic feet to ensure the desk is stable and level on your floor.
Billede 4.1: Detaljeret view of the integrated side shelves, illustrating their placement within the desk frame.
Billede 4.2: En vinklet view of the assembled desk, showing the desktop attached to the steel frame and shelves.
Image 4.3: Close-up of an adjustable foot, demonstrating its leveling mechanism.
5. Driftsvejledninger
- Placering: Position the desk on a flat, stable surface. Avoid direct sunlight or extreme temperature changes to prevent material damage.
- Belastningskapacitet: Do not exceed the maximum load capacity of 150 kg for the tabletop and 25 kg for each side compartment. Distribute weight evenly.
- Kabelstyring: Utilize the space behind the desk for organizing cables to maintain a tidy workspace.
- Stabilitet: Regularly check the adjustable feet and tighten them if the desk becomes wobbly.
6. Vedligeholdelse og pleje
- Rensning: Tør skrivebordets overflader af med en blød,amp klud. Undgå slibende rengøringsmidler eller barske kemikalier, da disse kan beskadige overfladen.
- Spild: Rengør spild straks for at forhindre pletter eller vandskader på det konstruerede træ.
- Fastgørelsesmidler: Periodically inspect all screws and bolts and tighten them as necessary to maintain structural integrity.
- Beskyttelse: Use coasters or protective pads under hot items or items that may scratch the surface.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skrivebordet er vakkelvornt | Ujævnt gulv; løse fastgørelseselementer | Adjust the leveling feet; tighten all screws and bolts. |
| Parts are missing or damaged | Forsendelsesfejl; fabrikationsfejl | Contact tectake customer support with your purchase details. |
| Vanskeligheder under montering | Incorrect step sequence; misaligned parts | Review the assembly instructions carefully; ensure parts are correctly oriented before tightening. |
8. Specifikationer
- Model: 800993
- Mærke: tectake
- Farve: Industrial Light Wood
- Materiale: Konstrueret træ, legeret stål
- Total Dimensions (W x D x H): Cirka 120 x 60 x 75.5 cm
- Top Side Compartments (W x D x H): Cirka 20 x 58 x 34 cm
- Bottom Side Compartment (W x D x H): Cirka 20 x 58 x 30 cm
- Steel Body Dimensions: Cirka 2 x 2 cm
- Adjustable Plastic Feet Height: Cirka 1.5 cm
- Bordpladebelastningskapacitet: 150 kg
- Each Side Compartment Load Capacity: 25 kg
- Varens vægt: 15 kg
- Særlige funktioner: Justerbare fødder
Image 8.1: Detailed diagram illustrating the dimensions of the tectake Canton Computer Desk.
9. Garanti og support
For warranty information, product support, or to report missing/damaged parts, please contact your retailer or the manufacturer, tectake. Please have your purchase receipt and model number (800993) available when contacting support.
Manufacturer: tectake
Seller: TecTake Sweden AB