AIDA Imaging PTZ-NDI-X18B Broadcast NDI|HX FHD NDI/IP/HDMI 18X Zoom PTZ-kamera Brugermanual

Indledning

This manual provides detailed instructions for the setup, operation, and maintenance of your AIDA Imaging PTZ-NDI-X18B Broadcast NDI|HX FHD NDI/IP/HDMI 18X Zoom PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

Figur 1: Forside view of the AIDA Imaging PTZ-NDI-X18B Camera, showcasing its compact design and NDI|HX branding.

Hvad er der i æsken

• AIDA Imaging Full HD NDI|HX Broadcast PTZ Camera with 18x Optical Zoom (Black)
• Fjernbetjening
• Kamera monteringsbeslag
• Strømadapter
• Strømkabel
• Oplysninger om begrænset 2 års garanti

Opsætning

Follow these steps to set up your PTZ camera for initial use.

1. Udpakning: Carefully remove all components from the packaging. Verify that all items listed in "What's in the Box" are present.
2. Montering: The camera supports wall mounting. Use the provided camera mounting bracket to securely install the camera in your desired location. Ensure the mounting surface is stable and can support the camera's weight.
3. Strømtilslutning: Connect the power adapter to the camera's DC12V input port and then plug the power cable into a suitable power outlet.
4. Videoudgangstilslutning:
   • HDMI udgang: Connect an HDMI cable from the camera's HDMI port to your display or video switcher.
   • IP/NDI Output: Connect an Ethernet cable from the camera's NDI/IP port to your network switch or router. This enables NDI|HX streaming and IP control.
5. Lydindgang (valgfrit): If external audio is required, connect an audio source to the "Line in" port.
6. Styreforbindelser (valgfrit): For RS232 control, connect appropriate cables to the IN-RS232-OUT ports.

Figur 2: Bagside view of the camera showing connection ports including RS232, HDMI, Line In, NDI/IP, and DC12V power input.

Betjeningsvejledning

This section details the basic operation of the PTZ-NDI-X18B camera.

Tænd/sluk

Once connected to power, the camera will automatically power on. To power off, disconnect the power cable.

Panorering, vipning og zoom (PTZ) kontrol

The camera features pan, tilt, and 18x optical zoom capabilities. Control can be achieved via the included remote control or through NDI|HX protocol over the network.

• Fjernbetjening: Use the directional buttons on the remote to pan and tilt the camera. Use the zoom buttons to adjust the 18x optical zoom.
• NDI|HX Control: Connect the camera to an NDI-compatible network. Use NDI-enabled software or hardware controllers to remotely control pan, tilt, and zoom functions with low latency.

Video output

The camera provides simultaneous IP and HDMI outputs. This allows for flexible integration into various production workflows.

• HDMI: Provides a direct Full HD video feed to a monitor or switcher.
• NDI|HX: Streams Full HD video and audio over your network with low latency, compatible with NDI-enabled devices and software.

Image Quality Features

The camera utilizes a Full HD Progressive Scan sensor and an advanced digital image processor to deliver sharp, vivid images. It also includes a motion-compensated temporal noise reduction filter for clear video even in challenging lighting conditions.

Opretholdelse

Korrekt vedligeholdelse sikrer dit kameras levetid og optimale ydeevne.

• Rensning: Brug en blød, tør klud til at rengøre kamerahuset. Brug en specialklud og -opløsning til objektivet. Undgå skrappe kemikalier eller slibende materialer.
• Firmwareopdateringer: Periodically check the AIDA Imaging website for firmware updates. Keeping the firmware current can improve performance and add new features.
• Miljøforhold: Operate the camera within recommended temperature and humidity ranges. Avoid exposing the camera to extreme temperatures, moisture, or dust.

Fejlfinding

Hvis du støder på problemer med dit kamera, kan du se følgende almindelige problemer og løsninger.

• Ingen strøm:
  • Sørg for, at strømadapteren er korrekt tilsluttet både kameraet og en fungerende stikkontakt.
  • Kontroller, at strømkablet ikke er beskadiget.
• No Video Output (HDMI):
  • Check the HDMI cable connection at both the camera and the display/switcher.
  • Try a different HDMI cable or input port on your display.
  • Sørg for, at skærmen er indstillet til den korrekte inputkilde.
• No Video Output (NDI/IP):
  • Verify the Ethernet cable is securely connected and the network is active.
  • Ensure your NDI-compatible software or hardware is properly configured to detect NDI sources on the network.
  • Check the camera's IP settings (refer to advanced network configuration documentation if needed).
• PTZ-styringen reagerer ikke:
  • For remote control, ensure batteries are functional and there are no obstructions.
  • For NDI|HX control, verify network connectivity and NDI control software settings.
• Dårlig billedkvalitet:
  • Sørg for, at linsen er ren og fri for støv eller pletter.
  • Check lighting conditions in the environment.
  • Verify camera settings (e.g., exposure, white balance) are appropriate for the current environment.

If the problem persists, please contact AIDA Imaging customer support.

Specifikationer

Garanti og support

Garantioplysninger

This AIDA Imaging PTZ-NDI-X18B camera comes with a Limited 2-Year Warranty. Please refer to the warranty card included in your product packaging for full terms and conditions.

Kundesupport

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact AIDA Imaging customer support through their official webwebstedet eller de kontaktoplysninger, der er angivet med dit køb.

Webwebsted: www.aidaimaging.com