HIKROBOT MV-CH120-10UC Machine Vision FA Camera User Manual

1. Introduktion

This user manual provides detailed instructions for the installation, operation, and maintenance of the HIKROBOT MV-CH120-10UC Machine Vision FA Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation. Keep this manual for future reference.

2. Sikkerhedsoplysninger

Always observe the following safety precautions to prevent injury and damage to the camera:

• Udsæt ikke kameraet for ekstreme temperaturer, fugtighed eller direkte sollys.
• Undgå kraftige stød eller vibrationer.
• Forsøg ikke at skille kameraet ad eller ændre det. Overlad al service til kvalificeret personale.
• Ensure proper power supply (DC12V or USB3.0) as specified to prevent electrical damage.
• Handle the lens and sensor area with care to avoid dust and scratches.
• Ensure proper grounding if applicable to your setup.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• HIKROBOT MV-CH120-10UC Camera Unit
• USB 3.0-kabel
• Hurtigstartguide (hvis inkluderet)
• Software CD or link for MVS client software/drivers

Hvis der mangler eller er beskadigede varer, bedes du straks kontakte din leverandør.

4. Produktet er slutview

The HIKROBOT MV-CH120-10UC is a high-performance 12MP machine vision camera designed for industrial applications. It features a Sony IMX304 CMOS sensor with global shutter, providing high-resolution images at up to 23.1 frames per second via a USB 3.0 interface.

Figur 4.1: Front view of the HIKROBOT MV-CH120-10UC camera, highlighting the C-mount lens interface. The camera body is orange and black.

Figur 4.2: Bag view of the HIKROBOT MV-CH120-10UC camera, displaying the PWR (power) input and USB 3.0 port for data and optional power. The camera body is orange and black.

Figur 4.3: Technical drawing illustrating the dimensions of the HIKROBOT MV-CH120-10UC camera in millimeters. Key dimensions include 44mm width, 29mm height, and 59mm length, along with mounting hole details.

5. Opsætning

Follow these steps for initial setup of your camera:

1. Software installation: Download and install the MVS client software or a compatible third-party software (e.g., supporting USB 3.0 Vision Protocol) from the HIKROBOT official website. Ensure your operating system (Windows XP/7/10 or Linux 32/64bit) is supported.
2. Lens Attachment: Carefully attach a compatible C-mount lens to the camera. Ensure it is securely fastened.
3. Strømtilslutning: Connect the camera to a DC12V power supply or connect the USB 3.0 cable to a powered USB 3.0 port on your computer. The camera supports power supply via USB 3.0.
4. Dataforbindelse: Connect the USB 3.0 cable from the camera to a USB 3.0 port on your computer.
5. Driver installation: The necessary drivers should be installed automatically with the MVS software. Verify that the camera is recognized by your operating system and the installed software.

6. Betjening

Once the camera is set up and recognized by the software, you can begin operation:

1. Start software: Open the MVS client software or your chosen third-party application.
2. Kameravalg: Select the MV-CH120-10UC camera from the list of detected devices within the software.
3. Parameterkonfiguration: Adjust camera parameters such as resolution (4096 × 3000), frame rate (up to 23.1fps), exposure time (1µs to 10s), gain (0dB to 20dB), and pixel format (e.g., Mono 8/10/12, BayerGB, YUV422Packed, RGB 8, BGR 8) as required for your application.
4. Billedoptagelse: Initiate image acquisition in continuous mode or single-frame mode.
5. Digital I/O: Utilize the 6-pin Hirose connector for external triggering or synchronization via the opto-isolated input (Line0), opto-isolated output (Line1), or bidirectional non-isolated I/O (Line2).
6. Billedbehandling: Use the software's tools for image display, saving, and basic processing.

7. Vedligeholdelse

Korrekt vedligeholdelse sikrer kameraets levetid og optimale ydeevne:

• Rensning: Use a soft, lint-free cloth to clean the camera body. For the lens and sensor, use specialized optical cleaning solutions and tools. Avoid abrasive materials.
• Opbevaring: When not in use, store the camera in a dry, dust-free environment within the specified storage temperature range (-30°C to 70°C) and humidity (20% to 80% RH, non-condensing).
• Firmwareopdateringer: Periodically check the HIKROBOT webwebsted for firmwareopdateringer for at sikre, at dit kamera har de nyeste funktioner og fejlrettelser.

8. Fejlfinding

Hvis du støder på problemer, kan du se følgende almindelige problemer og løsninger:

• Kamera ikke registreret:
  • Ensure the USB 3.0 cable is securely connected to both the camera and the computer.
  • Verify that the camera is receiving power (either via USB 3.0 or external DC12V).
  • Check if the camera drivers are correctly installed. Reinstall the MVS software if necessary.
  • Try connecting to a different USB 3.0 port or computer.
• Intet billede/sort skærm:
  • Check lens cap removal.
  • Verify exposure time and gain settings in the software. They might be too low for the lighting conditions.
  • Ensure the correct pixel format is selected.
• Image Quality Issues (Noise, Blurriness):
  • Adjust focus on the lens.
  • Check for dust or smudges on the lens or sensor.
  • Optimize exposure time and gain settings to reduce noise.
  • Ensure proper lighting conditions for your application.
• Software Crashes/Freezes:
  • Sørg for, at dit operativsystem opfylder minimumskravene.
  • Opdater dine grafikkortdrivere.
  • Reinstall the MVS client software.

For persistent issues, please contact HIKROBOT technical support.

9. Specifikationer

10. Garantioplysninger

HIKROBOT products are typically covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please refer to the warranty card included with your product or visit the official HIKROBOT webwebstedet for detaljerede garantioplysninger.

Note: Damage caused by improper use, unauthorized modification, or failure to follow the instructions in this manual may void the warranty.

11. Support og kontakt

For technical support, product inquiries, or service requests, please contact HIKROBOT through the following channels:

• Officiel Webwebsted: Visit the HIKROBOT official website for the latest drivers, software, FAQs, and support resources.
• Kundeservice: Refer to the contact information provided on the HIKROBOT webwebsted for din region.
• Autoriserede distributører: Contact your local authorized HIKROBOT distributor or reseller for assistance.