LEDVANCE 65636
Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual
Model: 65636 | Mærke: LEDVANCE
Vigtige sikkerhedsoplysninger
- Kun indendørs brug: Dette produkt er designet til indendørs brug på tørre steder. Må ikke udsættes for vand eller høj luftfugtighed.
- Elektrisk sikkerhed: Sørg for, at strømadapteren er tilsluttet en passende stikkontakt. Overbelast ikke elektriske kredsløb.
- Skæringsinstruktioner: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
- Installation: Afbryd altid strømmen før installation eller vedligeholdelse.
- Varme: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
- Børn: Opbevar produktet og dets komponenter utilgængeligt for børn.
Pakkens indhold
Bekræft at alle komponenter er til stede i din pakke:
- (2) 16.4ft RGB Flexible LED Light Strips
- (1) Strømforsyning
- (1) IR Remote Controller (with battery included)
- (20) Monteringsclips
Image: Main product image showing the light strips, remote, power adapter, and clips.
Opsætning og installation
- Forbered overfladen: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
- Forbind komponenter: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
- Test funktionalitet: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
- Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
- Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
- Aktivér fjernbetjening: Remove the plastic tab from the remote control's battery door to activate the battery.
Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.
Operation
The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.
Fjernbetjeningsfunktioner:
- TIL/FRA: Power the light strips on or off.
- Farvevalg: Choose from 16 static colors using the color buttons.
- Dæmpning: Adjust the brightness of the selected color or dynamic mode.
- Dynamiske tilstande: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.
Opretholdelse
- Rensning: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Levetid: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
- Ekstern udskiftning af batteri: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene tænder ikke. | Power connection issue, remote battery dead, IR receiver blocked. | Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction. |
| Fjernbetjeningen reagerer ikke. | Remote battery dead, remote too far, IR receiver blocked. | Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver. |
| Some sections of the light strip are not lighting up. | Damaged section, incorrect cutting. | Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 65636 |
| Mærke | LEDVANCE (Sylvania) |
| Farve | RGB (16 colors) + White |
| Længde | 32ft (2 x 16.4ft strips) |
| Brug | Kun indendørs |
| Særlige funktioner | Farveskiftende, Dæmpbar, Energieffektiv |
| Lyskildetype | LED |
| Strømkilde | Elektrisk med ledning |
| Controller type | IR fjernbetjening |
| Voltage | 12 volt |
| Wattage | 24 watt |
| Forbindelse | Infrarød |
| Materiale | Plast |
| Varens vægt | 10.88 ounce |
| Levetid | Op til 30,000 timer |
| Vandmodstand | Ikke vandafvisende |
| UPC | 046135656361 |
Garanti og support
This Sylvania LED Flexible Light Strip Starter Kit is backed by a 1 års producentgaranti.
For technical support, warranty claims, or additional product information, please visit the official LEDVANCE webwebsted eller kontakt deres kundeserviceafdeling.
Du kan også besøge LEDVANCE Store on Amazon for flere produkter og information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.