LEDVANCE Linear LED Shelf Light 400mm

1. Introduktion

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Læs venligst denne manual grundigt inden installation, og gem den til senere brug.

2. Sikkerhedsinstruktioner

• Elektrisk sikkerhed: Installationen skal udføres af en kvalificeret elektriker eller en kompetent person i overensstemmelse med lokale el-forskrifter og -regler. Afbryd altid strømmen ved hovedafbryderen før installation, vedligeholdelse eller reparation.
• Tiltænkt brug: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• IP44-klassificering: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Lyskilde: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Håndtering: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Rensning: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Tilslutningstilbehør

4. Specifikationer

Bemærk: Specifikationerne kan ændres uden varsel.

5. Opsætning og installation

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Forbered installationsområdet: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Afbryd strømmen: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Markér borepunkter: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Bore huller: Bor huller på de markerede punkter med et passende bor til dit vægmateriale. Sæt de medfølgende rawlplugs i de borede huller.
5. Fastgør monteringsbeslag: Fastgør monteringsbeslagene til væggen med de medfølgende skruer. Sørg for, at de er ordentligt fastgjort.
6. Elektrisk tilslutning: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Monter armaturet: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Gendan strøm: Once the fixture is securely mounted and wired, restore power at the main circuit breaker.

6. Betjeningsvejledning

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Automatisk drift: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Automatisk slukning: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Sensorplacering: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Vedligeholdelse

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Rensning: For at rengøre armaturet skal du sørge for, at strømmen er slukket. Tør overfladen af ​​med en blød, tør eller let fugtet klud.amp klud. Brug ikke skrappe kemikalier, slibende rengøringsmidler eller spray direkte på armaturet.
• Inspektion: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Lyskilde: LED-lyskilden er integreret og kan ikke udskiftes af brugeren. Hvis lyskilden svigter, skal hele armaturet udskiftes.

8. Fejlfinding

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Lyset tændes ikke:
  • Kontroller om strømforsyningen er tilsluttet, og om afbryderen er slået til.
  • Sørg for, at ledningsforbindelserne er sikre.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Lyset lyser konstant:
  • Sørg for, at der ikke er nogen kontinuerlig bevægelse inden for sensorens detektionsområde.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Lysglimt eller flimren:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Sørg for, at voltage supply is stable and within the specified range (240V).

Hvis disse trin ikke løser problemet, skal du kontakte kundesupport.

9. Garanti og support

This LEDVANCE Linear LED Shelf Light comes with a 2 års garanti fra købsdatoen, dækker defekter i materialer og udførelse ved normal brug.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.