PXBNIUYA 108 LED Sparkly Fairy Tree Lamp Instruktionsmanual

1. Introduktion

Thank you for choosing the PXBNIUYA 108 LED Sparkly Fairy Tree Lamp. This decorative LED tree lamp is designed to add a warm and inviting ambiance to your home. Featuring 108 warm white LED lights, bendable branches for customizable styling, and convenient remote control operation, it is suitable for various indoor settings and occasions.

2. Sikkerhedsoplysninger

• Kun indendørs brug: This product is designed for indoor use. Do not expose to water or high humidity.
• Strømkilde: Træet lamp can be powered by USB or 3 AA batteries (not included). The remote control uses a CR2025 coin battery (included).
• Vigtig bemærkning om batteriet: When using batteries, please unplug the USB cable to prevent potential damage to the unit.
• LED lys: LED bulbs do not generate significant heat, ensuring safe operation over extended periods.
• Justering af gren: Branches are flexible. Adjust them gently to avoid damaging the wiring.

3. Pakkens indhold

Sørg venligst for, at alle varer er til stede og i god stand, når du åbner pakken:

• 1 x PXBNIUYA 108 LED Sparkly Fairy Tree Lamp (Base and Tree Assembly)
• 1 x USB-strømkabel
• 1 x Wireless Remote Control (with CR2025 coin battery installed)

4. Opsætningsvejledning

4.1. Powering the Tree Lamp

Your tree lamp offers two power options:

1. USB Strøm: Connect the provided USB cable to the USB port on the side of the lamp base and plug the other end into a compatible USB power adapter (not included) or a USB port.
2. Batteristrøm:
   • Find batterirummet på undersiden af ​​l'en.amp grundlag.
   • Isæt 3 AA-batterier (medfølger ikke), og sørg for korrekt polaritet (+/-).
   • Luk batterirummet forsvarligt.
   • Note: If using batteries, ensure the USB cable is unplugged.

Billede: Nærbillede af lamp base, highlighting the USB port and the battery compartment on the underside.

4.2. Assembling and Shaping the Tree

The tree branches are flexible and can be shaped to your desired aesthetic:

1. Gently unfold the branches from their compact packaging.
2. Bend and arrange each branch and its individual LED tips to create a natural or desired tree shape.
3. Ensure the base is securely attached to the main tree trunk.

Image: The assembled tree lamp with its remote control and USB cable, ready for use.

5. Betjeningsvejledning

5.1. Tænd/sluk

• Berøringssensor: Press the power symbol on the lamp base til at tænde eller slukke lyset.
• Fjernbetjening: Brug ON og SLUKKET buttons on the remote to control the power.

Image: Diagram illustrating the functions of the 13-key remote control, including power, mode, timer, and dimming buttons.

5.2. Ændring af lystilstande

Lamp features 8 different lighting modes:

• Brug MODE button on the remote control to cycle through the 8 available modes.
• Alternatively, repeatedly press the touch sensor button on the base to change modes.

5.3. Justering af lysstyrke

Adjust the light intensity to suit your preference:

• Brug + (plus) button on the remote to increase brightness.
• Brug - (minus) button on the remote to decrease brightness.

5.4. Timer funktion

Set a timer for automatic shut-off:

• Tryk på TIMER button on the remote control to activate the timer. The light will remain on for a set duration (typically 6 hours on, 18 hours off, but refer to specific remote instructions for details).

6. Nøglefunktioner

• Dobbelt kontrol: Betjen lamp using either the included wireless remote control or the touch sensor switch on the base.
• Fleksible strømmuligheder: Can be powered via USB cable for continuous use or 3 AA batteries for portable placement.
• DIY Design: The bonsai-style branches are made of copper wire and are fully bendable, allowing for personalized shaping and decoration.
• 8 lystilstande: Choose from various lighting effects to create different atmospheres.
• Dæmpbar: Adjust the brightness level to your preference using the remote control.
• Integreret timer: Set the light to automatically turn off after a specified period.
• Energieffektiv: 108 LED bulbs consume minimal power and do not generate heat.

7. Vedligeholdelse

• Rensning: Tør lamp and base with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Udskiftning af batteri: Replace AA batteries in the base and the CR2025 coin battery in the remote control as needed. Ensure correct polarity.
• Opbevaring: When not in use for extended periods, remove batteries and store the lamp på et køligt, tørt sted.

8. Fejlfinding

9. Specifikationer

Image: The tree lamp with its approximate height and base width indicated.

10. Garanti og support

For warranty information, product support, or any inquiries, please refer to the official PXBNIUYA brand store or contact their customer service directly.

You can visit the PXBNIUYA Store her.