Sennheiser HD6XX

Sennheiser HD6XX Open Back Professional Headphones

Brugermanual

1. Introduktion

The Sennheiser HD6XX are open-back, dynamic headphones designed for professional audio applications and critical listening. These headphones feature a midnight blue finish and are engineered to deliver a detailed and accurate sound experience. This manual provides essential information for the proper setup, operation, and maintenance of your HD6XX headphones.

Sennheiser HD6XX headphones resting on a headphone stand.
Image: The Sennheiser HD6XX headphones displayed on a stand, showcasing their open-back design and midnight blue finish.

2. Pakkens indhold

Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:

  • Sennheiser HD6XX Open Back Professional Headphones
  • Detachable 6-foot (1.8 m) audio cable with 3.5 mm connector
Sennheiser HD6XX product box.
Image: The retail packaging for the Sennheiser HD6XX headphones, indicating the model number.

3. Opsætning

3.1 Tilslutning af kablet

  1. Identify the left (L) and right (R) connectors on the detachable audio cable.
  2. Align the L connector with the left earcup input and the R connector with the right earcup input.
  3. Gently push each connector firmly into its respective input until it clicks into place.
  4. Connect the 3.5 mm plug of the cable to your audio source (e.g., headphone amplifier, audio interface, computer, or mobile device).
Sennheiser HD6XX headphones with detachable cable and 3.5mm adapter.
Image: The Sennheiser HD6XX headphones shown with their detachable audio cable and a 3.5mm to 6.3mm adapter, illustrating the connection points.

3.2 Sådan tager du hovedtelefonerne på

For optimal lydkvalitet og komfort skal du sørge for, at hovedtelefonerne bæres korrekt:

  • Adjust the headband so that the earcups sit comfortably over your ears. The earcups are designed to fully enclose your ears.
  • Ensure the left (L) and right (R) indicators on the earcups correspond to your left and right ears.
  • The open-back design allows for natural sound reproduction and a wide soundstage, but also means sound can be heard by others nearby and external sounds are not fully blocked.
Close-up of the Sennheiser HD6XX earcups.
Billede: Et nærbillede view of the plush earcups and open-back grille of the Sennheiser HD6XX headphones, highlighting their comfortable design.

4. Betjeningsvejledning

Once connected to an audio source, the Sennheiser HD6XX headphones are ready for use. Adjust the volume directly from your connected audio device. Due to their 300 Ohm impedance, these headphones benefit from a dedicated headphone amplifier for optimal performance and volume levels, especially with lower-power sources.

The open-back design provides a natural, spacious sound. Be aware that these headphones do not offer noise cancellation and will allow ambient sounds to pass through, while also allowing some sound to escape.

5. Vedligeholdelse

5.1 Rengøring

  • Brug en blød, tør klud til at rengøre hovedtelefonernes udvendige overflader.
  • Tør forsigtigt ørepuderne af med en let klud.amp klud om nødvendigt, og lad den lufttørre helt inden brug.
  • Do not use harsh cleaning agents, solvents, or abrasive materials, as these can damage the headphones.

5.2 Opbevaring

  • Store the headphones in a clean, dry place away from direct sunlight and extreme temperatures.
  • Undgå at placere tunge genstande på hovedtelefonerne for at forhindre skader.
  • When transporting, consider using a protective case to safeguard against impacts.

6. Fejlfinding

If you encounter issues with your Sennheiser HD6XX headphones, refer to the following common solutions:

  • Ingen lyd: Ensure the audio cable is securely connected to both the headphones and the audio source. Verify that the audio source is powered on and playing audio, and that its volume is turned up. Test with a different audio source or cable if possible.
  • Sound from One Side Only: Check the cable connections at both earcups and the audio source. Ensure the L/R connectors are correctly inserted. Test with a different audio source or cable.
  • Lav lydstyrke: Increase the volume on your audio source. For optimal performance, especially with high-impedance headphones like the HD6XX (300 Ohm), a dedicated headphone ampliifier anbefales.
  • Forvrænget lyd: Reduce the volume on your audio source. Ensure the audio cable is not damaged. Test with a different audio source.

7. Specifikationer

FeatureDetalje
ModelHD6XX
MærkeSennheiser
FarveMidnatsblå
TransducerprincipÅben, dynamisk
Frekvensrespons10 Hz – 41 kHz
Nominel impedans300 Ohm
Total harmonisk forvrængning (THD)<0.05 %
Kabellængde6 fod (1.8 m)
Stik3.5 mm Jack (detachable)
Vægt (uden kabel)9.2 oz (260 g)
MaterialePlast, stof
VandmodstandsniveauIkke vandafvisende
UPC615104293526

8. Garanti og support

Sennheiser products are covered by a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official Sennheiser webwebsted.

For technical support, service, or replacement parts, please contact Sennheiser customer service through their official website or authorized service centers. Ensure you have your product model (HD6XX) and proof of purchase available when seeking support.

© 2025 Sennheiser. Alle rettigheder forbeholdes.