Maxlite SL-48231-50

Maxlite Shop Light SL-48231-50 Brugsanvisning

Model: SL-48231-50

Produkt overview

The Maxlite Shop Light SL-48231-50 is a 48-inch, 23W, 120V LED shop light designed for various indoor applications such as garages, workshops, and basements. It provides instant full brightness with a 5000K daylight color temperature and is ENERGY STAR certified for energy efficiency. This fixture features a built-in on/off pull chain, a 5ft power cord with a 120V plug, and is linkable with up to 4 units for extended lighting coverage.

Maxlite Shop Light SL-48231-50

Image: Maxlite Shop Light SL-48231-50, a white 48-inch LED fixture with a pull chain and power outlet on one end.

Sikkerhedsoplysninger

Always read and follow all safety instructions before installation and operation. Disconnect power before servicing. This product is intended for indoor use only. Do not modify the fixture or use it for purposes other than its intended use.

  • Ensure the power supply is turned off at the circuit breaker before installation.
  • Må ikke installeres i nærheden af ​​varmekilder eller på våde steder.
  • Use appropriate mounting hardware for your installation surface.
  • Do not exceed the maximum linkable units (4 units).

Opsætning og installation

The Maxlite Shop Light SL-48231-50 is designed for semi-flush ceiling mount installation. No assembly is required for the light fixture itself.

Pakkeindhold:

  • 1 x Maxlite Shop Light SL-48231-50
  • Monteringsudstyr (kroge, kæder, skruer)
  • 5ft power cord with 120V plug

Installationstrin:

  1. Forbered installationsområdet: Choose a suitable location for mounting, such as a garage, workshop, or basement. Ensure the surface can support the weight of the fixture (approximately 15.5 ounces).
  2. Sluk for strømmen: Before beginning any electrical work, turn off the power to the installation area at the main circuit breaker.
  3. Monter armaturet:
    • Mark the desired mounting points on the ceiling or wall.
    • Install the provided mounting hardware (e.g., ceiling hooks or screws) securely into the marked points.
    • Hang the shop light using the installed hardware. The fixture has screw holes for flush mounting.
  4. Tilslut strøm: Plug the 5ft power cord into a standard 120V electrical outlet.
  5. Link Multiple Units (Optional): If linking multiple units, connect the linking cable from the output end of one fixture to the input end of the next. Do not exceed 4 linked units.
  6. Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal du tænde for strømmen igen ved afbryderen.

Betjeningsvejledning

The Maxlite Shop Light SL-48231-50 is simple to operate using its integrated pull chain.

  • Tænder: Gently pull the chain extending from the fixture once to turn the light on.
  • Slukker: Gently pull the chain again to turn the light off.

The light provides instant full brightness upon activation.

Opretholdelse

The Maxlite Shop Light SL-448231-50 requires minimal maintenance due to its LED technology.

  • Rensning: Before cleaning, ensure the power is disconnected. Use a soft, dry cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
  • Udskiftning af pære: This fixture uses integrated LED lighting and does not require bulb replacement. If the LEDs fail, the entire fixture typically needs to be replaced.
  • Inspektion: Periodically inspect the power cord and mounting hardware for any signs of wear or damage. If damage is found, discontinue use and contact a qualified electrician or the manufacturer.

Fejlfinding

ProblemMulig årsagLøsning
Lyset tændes ikke.
  • Ingen strøm til stikkontakten.
  • Pull chain is in the "off" position.
  • Defekt armatur.
  • Check the circuit breaker and ensure the outlet is live.
  • Pull the chain to cycle the light on.
  • Kontakt kundesupport for at få hjælp.
Lyset flimrer eller dæmpes.
  • Løs forbindelse.
  • Voltage udsving.
  • Armaturet nærmer sig slutningen af ​​sin levetid.
  • Sørg for, at netledningen er sat ordentligt i.
  • Kontakt en elektriker, hvis der ertage-problemerne fortsætter.
  • Kontakt kundesupport.
Linked lights do not work.
  • Incorrect linking connection.
  • Overskredet maksimalt antal sammenkædede enheder.
  • Verify linking cables are properly connected.
  • Ensure no more than 4 units are linked.

Specifikationer

FeatureDetalje
MærkeMaxlite
ModelnummerSL-48231-50
Produktdimensioner48 cm L x 2.5 cm B x 2 cm H
Varens vægt15.5 ounce
LyskildetypeLED
Wattage23 watt
Voltage120 volt
Farvetemperatur5000K (dagslys)
KontrolmetodeTræk kædekontrol
MonteringstypeCeiling Mount (Semi Flush)
Indendørs/Udendørs brugIndendørs
StrømkildeElektrisk med ledning
sammenknyttesOp til 4 enheder
CertificeringerENERGY STAR certified, ETL

Garanti og support

Garantioplysninger:

This Maxlite product comes with a Limited Warranty. For specific terms and conditions of the warranty, please refer to the documentation included with your purchase or visit the official Maxlite website. The provided data states "Warranty Description: N/a.", indicating general warranty information is not detailed here, but a limited warranty is offered.

Kundesupport:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Maxlite customer support. Visit the official Maxlite webhjemmeside for de seneste kontaktoplysninger.

You can also visit the Maxlite store on Amazon for more information: Maxlite Amazon Store

© 2023 Maxlite. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.