Indledning
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics 40W Waterproof LED Outdoor Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
Sikkerhedsoplysninger
- ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service.
- Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
- Ground the fixture properly to avoid potential electrical shock and to ensure reliable operation.
- Må ikke tilsluttes en lysdæmper.
- Se ikke direkte ind i LED-lyskilden.
- Sørg for, at alle forbindelser er sikre og korrekt isolerede.
- Driftstemperaturområde: -20°C til 40°C (-4°F til 104°F).
Pakkens indhold
- Amazon Basics 40W LED Outdoor Motion Sensor Security Light (1 unit)
- Monteringsudstyr (skruer, trådmøtrikker)
- Instruktionsmanual
Produktegenskaber
The Amazon Basics 40W LED Outdoor Motion Sensor Security Light is designed for reliable outdoor illumination with energy efficiency and adjustable features.
- Høj lysstyrke: 2 ultra-bright LED light heads produce up to 4000 lumens at 5000K daylight color temperature.
- Bevægelsesdetektion: Integrated motion sensor with up to 180° detection angle and a range of up to 49 feet.
- Justerbart design: LED heads are flexibly adjustable 350° horizontally and 60° vertically. The motion sensor is adjustable 180° horizontally and 90° vertically.
- Holdbar konstruktion: Aluminum design for effective heat dissipation and a bulb lifespan of up to 50,000 hours.
- Vejrbestandig: Waterproof rating ensures resilience against rain, sleet, or snow.
- ETL Certificeret: Meets safety and quality standards.
Billede: Forside view of the Amazon Basics 40W LED Outdoor Motion Sensor Security Light, highlighting its two adjustable light heads and motion sensor.
Opsætning
Follow these steps for proper installation of your security light. Professional installation is recommended if you are unfamiliar with electrical wiring.
- Forbered til installation:
- Sluk for strømmen ved afbryderen eller sikringsskabet, før installationen påbegyndes.
- Sørg for, at monteringsfladen er stabil og kan bære armaturets vægt.
- Monter armaturet:
- Fastgør monteringsbeslaget til samledåsen ved hjælp af de medfølgende skruer.
- Connect the electrical wires: black to black (live), white to white (neutral), and green/bare copper to ground. Secure connections with wire nuts.
- Carefully push the wires into the junction box and secure the fixture to the mounting bracket.
- Juster lyshoveder og sensor:
- Loosen the adjustment screws on the light heads and motion sensor.
- Position the light heads to cover the desired illumination area.
- Angle the motion sensor to optimize detection coverage, typically pointing slightly downwards.
- Tighten all adjustment screws securely.
- Gendan strøm: Tænd for strømmen igen ved afbryderen.
Image: The security light installed on the exterior wall of a building, illuminating the area below.
Betjeningsvejledning
The motion sensor has adjustable settings to customize its operation.
- TIME Indstilling: This dial controls how long the light remains on after motion is detected. Adjust from 5 seconds to 12 minutes.
- LUX (Daylight) Setting: This dial determines the ambient light level at which the motion sensor becomes active.
- Turn towards the "Sun" symbol for activation during both day and night.
- Turn towards the "Moon" symbol for activation only during nighttime or low-light conditions.
- Første opstart: Upon first power-up, the light may stay on for a short period (e.g., 5 minutes) as it calibrates. After this initial period, it will operate according to your chosen settings.
Opretholdelse
- Rensning: Rengør armaturet med en blød, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler. Sørg for, at strømmen er slukket, før rengøring.
- Inspektion: Periodically check for loose wiring or damaged components. Replace any damaged parts immediately.
- lysdioder: The integrated LED bulbs are designed for long life and are not user-replaceable.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power; faulty wiring; LUX setting too high (daylight). | Check circuit breaker; verify wiring connections; adjust LUX setting towards "Moon" symbol. |
| Lyset forbliver tændt konstant. | Motion sensor continuously triggered; TIME setting too long; LUX setting too low (always active). | Adjust sensor angle to avoid constant triggers; reduce TIME setting; adjust LUX setting towards "Sun" symbol. |
| Lyset flimrer eller dæmpes. | Løs ledningsforbindelse; strømsvingninger. | Check and secure all wiring connections; consult an electrician if power fluctuations persist. |
| Bevægelsessensorens rækkevidde er dårlig. | Sensor obstructed; incorrect angle; environmental factors (temperature). | Clear obstructions; adjust sensor angle; consider environmental conditions. |
Specifikationer
| Modelnummer | SM-4000-180-2H |
| Mærke | Grundlæggende om Amazon |
| Wattage | 40W |
| Lysstyrke | 4000 lumen |
| Farvetemperatur | 5000K dagslys |
| Detektionsvinkel | Op til 180° |
| Detektionsområde | Op til 49 fod |
| Voltage | 120 volt |
| Materiale | Aluminium, plast |
| Vandmodstandsniveau | Vandtæt |
| Certificeringer | ETL Certificeret |
| Varedimensioner (L x B x H) | 14.96 cm x 6.3 cm x 5.12 cm |
| Varens vægt | 1.9 pund |
Garanti og support
For warranty information or technical support, please refer to the Amazon Basics product page or contact Amazon customer service. Keep your purchase receipt for warranty claims.