1. Introduktion
Thank you for choosing the CREATE NETBOT LÁSER LS23 Endurance Robot Vacuum Cleaner. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.
The NETBOT LÁSER LS23 Endurance is designed to provide efficient and intelligent cleaning for various floor types, featuring laser navigation, powerful suction, and a mopping function. For optimal performance, follow the instructions carefully.
2. Sikkerhedsinstruktioner
Overhold altid følgende sikkerhedsforanstaltninger for at mindske risikoen for brand, elektrisk stød eller personskade:
- Dette apparat kan bruges af børn i alderen 8 år og derover og personer med nedsatte fysiske, sensoriske eller mentale evner eller mangel på erfaring og viden, hvis de har fået opsyn eller instruktion i brugen af apparatet på en sikker måde og forstår de involverede farer. .
- Børn skal være under opsyn for at sikre, at de ikke leger med apparatet.
- Rengøring og brugervedligeholdelse må ikke udføres af børn uden opsyn.
- Brug kun den originale strømadapter og opladningsdock, der er leveret af producenten.
- Brug ikke robotten i våde omgivelser eller i nærheden af vandkilder.
- Sørg for, at robotten er fuldt opladet før første brug.
- Fjern løse kabler, små genstande eller skrøbelige genstande fra rengøringsområdet for at forhindre, at de vikles ind i eller beskadiges.
- Brug ikke robotten, hvis den er beskadiget eller ikke fungerer korrekt. Kontakt kundesupport.
- Hold hår, løstsiddende tøj, fingre og alle dele af kroppen væk fra åbninger og bevægelige dele.
- Brug ikke robotten til at opsamle stort affald, skarpe genstande eller brændende/rygende materialer.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- NETBOT LÁSER LS23 Endurance Robot Vacuum Cleaner
- Opladningsdock
- Strømadapter
- Sidebørster (2 par)
- Hovedbørste (forinstalleret)
- Støvbeholder
- Vandtank med moppeklud
- Extra Mop Cloths (2 units)
- Rengøringsværktøj
- Brugervejledning (dette dokument)
Image 3.1: All components included in the package. This includes the robot, charging dock, power adapter, multiple brushes, dust bin, water tank, mop cloths, and a cleaning tool.
4. Produktet er slutview
4.1 Robot Top View
Billede 4.1: Top view of the robot. Features include the laser navigation sensor (LIDAR) on top, and two control buttons: Power/Clean and Home/Recharge.
4.2 Betjeningsknapper
Image 4.2: Close-up of the control panel. The power button initiates or pauses cleaning, while the home button sends the robot back to its charging dock.
4.3 Dust Bin / Water Tank
Image 4.3: The robot with its combined dust bin and water tank module detached. This module allows for both vacuuming and mopping functions.
5. Opsætning
5.1 Udpakning og indledende forberedelse
- Remove all packaging materials and protective films from the robot and accessories.
- Attach the two side brushes by pressing them onto their respective posts on the underside of the robot until they click into place.
5.2 Placing the Charging Dock
- Placer opladningsdokken mod en væg på en hård, plan overflade.
- Sørg for, at der er mindst 0.5 meter (1.6 fod) fri plads på begge sider af docken og 1.5 meter (4.9 fod) foran den.
- Tilslut strømadapteren til opladningsdocken, og sæt den i en stikkontakt. Indikatorlampen på docken lyser.
5.3 Indledende opladning
- Placer robotten på opladningsstationen, og sørg for, at opladningskontakterne flugter. Robotten vil meddele, at den oplader.
- Lad robotten oplade helt, før den tages i brug første gang. Dette tager typisk 4-5 timer. Strømindikatorlampen på robotten skifter, når den er fuldt opladet.
5.4 Appinstallation og Wi-Fi-forbindelse
- Download the "Netbot LS23" app from your smartphone's app store (iOS or Android).
- Registrer en konto og log ind.
- Follow the in-app instructions to add your device. Ensure your phone is connected to a 2.4GHz Wi-Fi network, as the robot does not support 5GHz networks.
- During the connection process, you may need to press and hold both the Power and Home buttons on the robot simultaneously for 3-5 seconds until it announces "Wi-Fi reset" or similar.
6. Betjeningsvejledning
6.1 Start/stop af rengøring
- Start rengøring: Press the Power button on the robot or tap "Start" in the app. The robot will begin cleaning in Auto mode.
- Pause rengøring: Press the Power button again or tap "Pause" in the app.
- Tilbage til Dokken: Press the Home button on the robot or tap "Recharge" in the app. The robot will automatically return to the charging dock.
6.2 Rengøringstilstande (via app)
- Auto rengøring: The robot intelligently maps and cleans your home.
- Rengøring af pletter: Instruerer robotten til intensiv rengøring af et specifikt lille område.
- Kantrensning: Robotten rengør langs vægge og møbelkanter.
- Zone rengøring: Definer specifikke områder på kortet, som robotten skal rengøre.
- Planlagt rengøring: Indstil specifikke tidspunkter for robottens automatiske rengøring.
6.3 Moppefunktion
- Fill the water tank with clean water. Do not use detergents or harsh chemicals.
- Attach the mop cloth firmly to the water tank.
- Insert the filled water tank into the robot until it clicks into place.
- The robot will automatically switch to vacuuming and mopping mode.
- Note: Remove the water tank before charging to prevent water damage to the charging dock or robot.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på din robotstøvsuger.
7.1 Emptying the Dust Bin and Cleaning Filters
- Press the release button to remove the dust bin/water tank module.
- Åbn låget til støvbeholderen, og tøm indholdet i en skraldespand.
- Remove the primary filter and HEPA filter. Tap them gently to remove dust. Rinse the primary filter with water if necessary, but ensure it is completely dry before re-installing. Do not wash the HEPA filter.
- Reassemble the filters and dust bin, then re-insert the module into the robot.
7.2 rengøringsbørster
- Hovedbørste: Remove the main brush cover and lift out the main brush. Use the provided cleaning tool to cut and remove any hair or debris tangled around the brush.
- Sidebørster: Pull the side brushes off their posts. Remove any tangled hair or debris. If brushes are worn, replace them with new ones.
7.3 Rengøring af sensorer og opladningskontakter
- Wipe the cliff sensors (located on the bottom of the robot), wall sensors (on the side), and charging contacts (on the robot and dock) with a clean, dry cloth.
- Ensure the laser navigation sensor (LIDAR) on top is free from obstructions and dust.
7.4 Rengøring af vandtank og moppeklud
- Efter hver moppesession tømmes eventuelt resterende vand fra tanken.
- Remove the mop cloth and rinse it thoroughly with water. Allow it to air dry completely before re-attaching or storing.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Robotten tænder ikke. | Lavt batteri; Sluk for strømmen. | Charge the robot; Ensure the main power switch (usually on the side/bottom) is ON. |
| Robotten kan ikke oprette forbindelse til Wi-Fi. | Forkert Wi-Fi-bånd (5 GHz); Forkert adgangskode; Routeren er for langt væk. | Ensure your phone is on a 2.4GHz network; Verify password; Move robot closer to router; Reset Wi-Fi on robot (press Power and Home buttons). |
| Robotten sidder ofte fast. | Forhindringer (kabler, tæpper); Snavsede sensorer. | Clear the cleaning area; Clean cliff and wall sensors. |
| Dårlig rengøringsevne. | Full dust bin; Clogged filters; Tangled brushes. | Empty dust bin; Clean/replace filters; Clean main and side brushes. |
| Robotten vender ikke tilbage til ladestationen. | Charging dock obstructed; Robot too far from dock; Dirty charging contacts. | Ensure clear space around dock; Manually place robot near dock; Clean charging contacts. |
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | SKABE |
| Modelnavn | LS23 |
| Overfladeanbefaling | Multi-Surface |
| Filtertype | Patron |
| Batterilevetid | 120 minutter |
| Strømkilde | Batteri |
| Batterier medfølger | Ja |
| Kontrolmetode | Anvendelse |
| Kompatible enheder | Smartphones |
| Støjniveau | 65 decibel |
10. Garanti og support
The CREATE NETBOT LÁSER LS23 Endurance Robot Vacuum Cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official CREATE webhjemmeside for detaljerede garantivilkår.
For technical support, service, or spare parts, please contact CREATE customer service through their official channels. Ensure you have your product model number (LS23) and proof of purchase ready when contacting support.