Indledning
Thank you for choosing the CFGROW LED Flame Effect Light. This manual provides detailed instructions for the safe and efficient use of your new flame lampLæs venligst denne manual grundigt inden brug, og gem den til senere brug.
Produkt overview
The CFGROW LED Flame Effect Light is a versatile, USB rechargeable lamp designed to create a realistic flame effect. It features multiple lighting modes, gravity sensing, and a remote control for convenient operation. Its waterproof design and magnetic base offer flexible placement options for both indoor and outdoor environments.
Nøglefunktioner:
- Realistisk flammeeffekt: Generates a dynamic, flickering flame simulation.
- Flere lystilstande: Includes realistic dancing flames, soft slow breathing flames, warm constant light, and gravity-induced mode.
- Fjernbetjening: Allows control of multiple lights, mode selection, brightness adjustment, and timer settings from a distance of 9.8 - 16.4 feet (3-5 meters).
- Tyngdekraftsføling: Automatically adjusts the flame direction to always appear upright, regardless of the lamp's orientation.
- USB genopladelig: Equipped with a 1200mAh battery, providing up to 20 hours of operation in flame mode on a full charge. Charges via USB port.
- Magnetic Base & Hanging Hook: Offers flexible mounting options, allowing attachment to metal surfaces or hanging.
- Vandtæt (IP44): Suitable for outdoor use, resistant to rain and splashes.
Image: The CFGROW LED Flame Effect Light shown alongside its infrared wireless remote control, illustrating the product's design and primary control method.
Billede: En visuel repræsentation af lamp's dimensions (5.11 inches height, 2.63 inches diameter) compared to a standard soda can, highlighting the 1200mAh USB rechargeable battery capacity. Details include the magnetic base, USB charging port, hanging hook design, and ON/OFF button.
Opsætning
- Indledende opkrævning: Before first use, fully charge the flame light using the provided USB cable. Connect the cable to the lamp's USB charging port and a compatible USB power source (e.g., computer, power bank, USB charger). The charging time is approximately 4 hours.
- Fjernbetjenings batteri: Ensure the remote control has a working CR2 battery installed.
- Placering: Choose a desired location. The lamp can be placed on a flat surface, hung using its flip-out hook, or attached to a metal surface via its magnetic base.
Billede: Fire eks.amples demonstrating versatile placement: inside a lampshade or lantern, stuck to a metallic surface, hanging from a fixture, and placed on a table.
Operation
Using the ON/OFF Button:
Press the ON/OFF button located on the lamp's base to cycle through the four lighting modes:
- Realistiske dansende flammer
- Soft Slow Breathing Flames
- Warm Constant Light
- Gravity Induced Mode (flame direction adjusts automatically)
Image: A visual guide illustrating the four distinct lighting modes: Realistic Dancing Flames, Warm Constant Light, Gravity Induced Mode, and Slow Breathing Flames.
Brug af den trådløse IR-fjernbetjening:
The remote control allows for more precise adjustments and timer functions. Ensure the remote is pointed towards the lamp within the effective range of 9.8 - 16.4 feet (3-5 meters).
Image: A detailed diagram of the remote control, labeling buttons for ON/OFF, Flame Dancing Mode, Constant Lighting Mode, Breath Mode, Brightness Adjustment (DIM+/DIM-), and Automatic Timer (1H, 2H, 3H, 4H).
- TIL/FRA: Powers the light on or off.
- Flamme: Activates the realistic dancing flame mode.
- Lys: Activates the warm constant light mode.
- Ånde: Activates the soft slow breathing flame mode.
- DIM+/DIM-: Adjusts the brightness level for Flame and Light modes. Brightness is not adjustable in Breath mode.
- Timer (1H/2H/3H/4H): Sets the light to automatically turn off after 1, 2, 3, or 4 hours. Pressing a timer button will cause the light to flash, indicating the setting is successful. This is a one-way timer; the light will need to be turned on manually after it automatically shuts off.
Note:
- One remote control can operate multiple flame lights simultaneously.
- The remote control range is approximately 9.8 - 16.4 feet (3-5 meters).
Opladning
The CFGROW LED Flame Effect Light is powered by a built-in 1200mAh rechargeable battery. To charge the device:
- Locate the USB charging port on the side of the lamp.
- Connect the small end of the included USB charging cable to the lamp's havn.
- Connect the larger end of the USB cable to a standard USB power source (e.g., computer, power adapter, power bank).
- Opladningsindikatoren (hvis den er til stede, normalt en lille LED) lyser under opladning og slukker eller skifter farve, når den er fuldt opladet.
- A full charge takes approximately 4 hours and provides up to 20 hours of operation in flame mode.
Billede: Et nærbillede view of the USB charging port on the side of the flame light, where the USB cable is connected for recharging the internal battery.
Opretholdelse
- Rensning: Tør lamp med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Vandtæthed: Lamp has an IP44 waterproof rating, meaning it is protected against splashing water from any direction. It is suitable for outdoor use in light rain but should not be submerged in water.
- Opbevaring: Når den ikke er i brug i længere perioder, skal den opbevaresamp in a cool, dry place and ensure it is fully charged every few months to maintain battery health.
Image: The flame effect light shown with water droplets, illustrating its IP44 waterproof capability, suitable for outdoor conditions.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Batteriet er afladet. | Oplad lamp fuldt ud ved hjælp af USB-kablet. |
| Fjernbetjening virker ikke. | Remote battery is low or depleted; remote is out of range or not pointed at the lamp. | Replace the CR2 battery in the remote. Ensure the remote is within 9.8-16.4 feet and pointed towards the lamp. |
| Flame effect appears incorrect or static. | Incorrect mode selected; gravity sensor interference. | Cycle through modes using the ON/OFF button or remote to select the desired flame effect. Ensure the lamp is placed on a stable surface for optimal gravity sensing. |
| Lyset slukker uventet. | Timer function activated; battery is low. | Check if a timer was set. Recharge the lamp hvis batteriet er lavt. |
Specifikationer
- Model: LED-LEF
- Mærke: CFGROW
- Lyskilde: LED
- Strømkilde: Batteridrevet (USB genopladelig)
- Batterikapacitet: 1200mAh lithium
- Opladningstid: Cirka 4 timer
- Driftstid: Up to 20 hours (Flame Mode)
- Wattage: 5 watt
- Voltage: 5 volt
- Materiale: Plastic, Metal Base
- Dimensioner: 2.63 cm diameter x 5.11 cm højde
- Varens vægt: 6.7 ounce (0.19 kilo)
- Vandtæthed: IP44
- Kontrolmetode: Remote Control, On-device button
- Inkluderede komponenter: LED Flame Effect Light, USB Charging Cable, Remote Control (with 1 CR2 battery)
Sikkerhedsoplysninger
- Produktet må ikke skilles ad eller modificeres.
- Holdes væk fra ekstreme temperaturer og direkte sollys.
- Do not expose the product to fire or high heat.
- Brug kun det medfølgende USB-kabel eller et tilsvarende certificeret kabel til opladning.
- Opbevares utilgængeligt for børn.
- Bortskaf batterier i henhold til lokale regler.
Garanti og support
The CFGROW LED Flame Effect Light comes with a 1 års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og funktionsfejl under normal brug.
For warranty claims, technical support, or any questions regarding your product, please contact CFGROW customer service. Please have your purchase receipt and product model number (LED-LEF) available when contacting support.
Contact information for support is typically found on the product packaging or the retailer's webwebstedet hvor produktet blev købt.