1. Introduktion
Thank you for choosing the INCLAKE Car Backup Camera. This Ultra HD 12 LED Night Vision Waterproof Reverse Camera is designed to enhance your driving safety by providing a clear and wide view of your vehicle's rear surroundings. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and a safe driving experience.
Image: The INCLAKE Car Backup Camera, showcasing its compact design and included mounting brackets.
2. Nøglefunktioner
- Ultra HD Screen & Accurate Color: Designed to eliminate blind spots and avoid obstacles, providing a clear CVBS Ultra HD picture for the driver.
- 12 LED & Superior Night Vision: Features 12 super bright LED lights that automatically illuminate in low daylight conditions, greatly enhancing night vision with sharp images.
- IP68 Waterproof & 140° View Justerbar vinkel: Protected against powerful water jets, ensuring reliable operation in rain and car washes. The 140° adjustable vertical viewing angle allows for optimal positioning.
- 2-i-1-installation: Can be installed on a license plate frame or mounted on the back, front, or side of the vehicle.
Image: Comparison of daytime and night vision display from the camera, highlighting the clear night vision capabilities.
Image: The camera with its 12 LED lights active, illustrating the 140-degree wide view angle for parking assistance.
Image: Demonstrates the IP68 waterproof rating of the camera, showing it withstanding water exposure.
3. Pakkens indhold
Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:
- INCLAKE Car Backup Camera
- Strømtråd
- 26ft/8m Video Wire
- Tråd Clamps
- Dobbeltsidet tape
- Metalbeslag
- Lynlåsebånd
- Brugermanual
Image: All components included in the INCLAKE Car Backup Camera package.
4. Opsætning og installation
The INCLAKE Car Backup Camera requires an actual installation, not just a simple clip-on or paste-on method. For optimal performance and to avoid potential issues, professional installation is highly recommended. If you choose to install it yourself, please follow the instructions carefully.
4.1. Ledningsdiagram
Refer to the diagram below for proper wiring connections. Ensure all connections are secure to prevent signal loss or power issues.
Image: Detailed wiring diagram for connecting the camera to a monitor and power source.
- Connect the video output (yellow RCA connector) from the camera to the video input of your monitor.
- Connect the red wire (+12V) of the camera's power cable to the vehicle's reversing light power supply.
- Connect the black wire (GND) of the camera's power cable to a suitable ground-iron part of the vehicle chassis.
- For some monitors, you may need to connect the video input trigger wire (often labeled A/B in diagrams) to the reversing light signal to automatically display the reversing image.
4.2. Monteringsmuligheder
The camera offers versatile installation options:
- License Plate Frame Installation: Mount the camera directly onto your vehicle's license plate frame using the provided brackets and screws.
- Overflademontering: The camera can also be mounted on the back, front, or side of your vehicle, depending on your preference and vehicle type. Use the double-sided tape and metal bracket for secure attachment.
Sørg for kameraets view is unobstructed and positioned to provide the widest possible angle for your needs.
5. Betjening
5.1. Grundlæggende betjening
Once properly installed and wired, the camera system will activate automatically when your vehicle is put into reverse gear (if wired to the reverse light power). The image will be displayed on your connected monitor.
5.2. Switching Procedures (Optional Features)
The camera features adjustable settings via specific wire loops. These loops allow you to customize the camera's display and functionality. Note: These features are controlled by cutting or keeping specific wire loops as shown in the diagram. Once cut, they cannot be reconnected to restore the original function.
Image: Illustration of the wire loops used to adjust camera settings.
- Mirror Image / Positive Image:
- Keep the white loop to show reverse front view (spejlbillede).
- Cut off the white loop to show front view (positive image).
- Reference Lines (Guide Lines):
- Keep the green loop to show guide lines.
- Cut off the green loop to show no guide lines.
- 12 LED Light Control:
- Keep the brown loop to turn on the 12 LED light.
- Cut off the brown loop to turn off the 12 LED light.
6. Vedligeholdelse
To ensure the longevity and optimal performance of your INCLAKE Car Backup Camera, follow these maintenance guidelines:
- Rensning: Rengør kameralinsen regelmæssigt med en blød kludamp klud til at fjerne snavs, støv eller vandpletter. Undgå slibende rengøringsmidler, der kan ridse linsen.
- Vejrbeskyttelse: While the camera is IP68 waterproof, extreme weather conditions (e.g., heavy snow, ice buildup) can temporarily obscure the view. Ensure the lens is clear before operating your vehicle.
- Kabelinspektion: Periodically check the wiring and connections for any signs of wear, damage, or loose connections. Secure or replace as necessary.
- Monteringssikkerhed: Verify that the camera remains securely mounted to prevent vibrations or dislodgement that could affect image stability or cause damage.
7. Fejlfinding
If you encounter issues with your INCLAKE Car Backup Camera, refer to the table below for common problems and their solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet billede på skærmen | Loose video cable connection; No power to camera; Incorrect monitor input selected. | Check and secure all video cable connections; Verify power supply to the camera; Select the correct video input on your monitor. |
| Sløret eller forvrænget billede | Dirty lens; Damaged video cable; Interference from other electrical components. | Clean the camera lens; Inspect video cable for damage and replace if necessary; Ensure proper grounding and routing of cables away from interference sources. |
| Nattesyn virker ikke | LED lights disabled (brown loop cut); Insufficient power to LEDs. | Check if the brown wire loop is intact (if you want LEDs on); Verify stable 12V power supply. |
| Guide lines not appearing | Guide lines disabled (green loop cut). | Ensure the green wire loop is intact (if you want guide lines). |
| Image is reversed (not mirror) | Mirror image function disabled (white loop cut). | Ensure the white wire loop is intact (if you want mirror image for reverse). |
8. Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Produktdimensioner | 10.43 x 1.65 x 3.43 tommer |
| Varens vægt | 9.6 ounce |
| Varemodelnummer | IN-0637 |
| Displayteknologi | LED |
| Farve | Hvid LED |
| Fabrikant | INCLAKE |
| Lux vurdering | 0.1 |
| Kompatible enheder | Overvåge |
| Installationstype | Bracket Mount, Surface Mount |
| Videooptagelsesopløsning | 1080p |
| Voltage | 12 volt |
| Optisk sensorteknologi | CMOS |
| Linsetype | Vidvinkel |
9. Garanti og support
The INCLAKE backup camera is guaranteed to provide a safe road trip. If you have any issues with the item or require further assistance, please feel free to contact INCLAKE customer service. Refer to your purchase documentation for specific warranty terms and contact information.