SHENGLE YKQ TJ

SHENGLE 27MHz Remote Control Transmitter

User Manual for Children's Ride-On Vehicles

Model: YKQ TJ

1. Vigtige sikkerhedsadvarsler

  • Ensure the remote control is not exposed to moisture or humidity, as this can negatively affect performance or cause malfunction.
  • Bland ikke gamle og nye batterier eller forskellige typer batterier.
  • Install batteries according to the positive (+) and negative (-) markings inside the battery compartment.
  • Hvis fjernbetjeningen ikke skal bruges i længere tid, skal batterierne tages ud for at forhindre lækage.
  • Dispose of used batteries responsibly according to local recycling guidelines to prevent environmental pollution.

2. Produktet er slutview

The SHENGLE 27MHz Remote Control Transmitter is designed for use with specific children's ride-on electric vehicles. This manual provides instructions for its proper setup, operation, and maintenance.

Front view of the SHENGLE 27MHz Remote Control Transmitter

Figur 1: Forside view of the SHENGLE 27MHz Remote Control Transmitter, showing two joysticks and an antenna.

3. Opsætning og kompatibilitet

3.1 Batteriinstallation

  1. Find batterirummet på bagsiden af ​​fjernbetjeningen.
  2. Open the battery compartment cover by sliding or unscrewing it.
  3. Insert the required batteries (typically AA, not included) into the compartment, ensuring correct polarity (+/-) as indicated.
  4. Luk batterirummets dæksel forsvarligt.
Tilbage view of the remote control with the battery compartment open, showing two AA battery slots.

Figure 2: Back of the remote control with the battery compartment open, illustrating battery placement.

3.2 Kompatibilitetskontrol

This remote control operates on a 27MHz frequency. It is crucial to verify that your children's ride-on vehicle uses a 27MHz receiver. This remote control is ikke kompatibel with 2.4G receivers.

  • Before purchase and use, confirm that the appearance of this remote control matches your original remote.
  • Ensure the manual function of your children's electric vehicle operates normally before attempting to use a new remote control.
Image showing the 27MHz remote control compatible with two types of 27MHz receivers.

Figure 3: The 27MHz remote control shown with compatible 27MHz receivers.

Image showing the 27MHz remote control explicitly stated as not compatible with various 2.4G receivers.

Figure 4: The 27MHz remote control is not compatible with 2.4G receivers, as illustrated with several incompatible receiver types.

4. Betjeningsvejledning

Once batteries are installed and compatibility is confirmed, the remote control should operate your children's ride-on vehicle. The specific functions of the joysticks (e.g., forward, reverse, left, right) depend on the vehicle's design.

  • Tænd: Ensure the vehicle's power is on. The remote control typically activates automatically upon battery insertion.
  • Kontrollere: Use the joysticks to maneuver the vehicle. Refer to your vehicle's manual for specific control mappings.
  • Rækkevidde: Operate the vehicle within a reasonable range to maintain a stable connection. Obstacles and interference can affect signal strength.

5. Vedligeholdelse

  • Keep the remote control clean and dry. Wipe with a soft, dry cloth if necessary.
  • Undgå at tabe fjernbetjeningen eller udsætte den for kraftige stød.
  • Replace batteries promptly when performance degrades or if the remote stops responding.

6. Fejlfinding

  • Fjernbetjeningen svarer ikke:
    • Kontroller, om batterierne er installeret korrekt og har tilstrækkelig opladning. Udskift om nødvendigt.
    • Verify that the remote control is indeed a 27MHz model and compatible with your vehicle's receiver.
    • Ensure the vehicle's power is on and its manual controls are functional.
  • Limited range or intermittent connection:
    • Ensure there are no major obstructions between the remote and the vehicle.
    • Check for potential sources of 27MHz interference in the operating environment.
    • Udskift batterierne i fjernbetjeningen.
  • Controls appear inverted (e.g., left turns right):
    • This can sometimes occur due to specific vehicle wiring or receiver configurations. Consult your vehicle's manual or manufacturer for potential solutions or re-calibration steps.

7. Specifikationer

FeatureDetalje
MærkeSHENGLE
ModelnummerYKQ TJ
Forbindelsesteknologi27MHz Radio Frequency
Kompatible enhederKids Powered Ride On Car, Children's Electric Ride On Toy (with 27MHz receiver)
Maks. antal understøttede enheder1 (pr. fjernbetjening)
Produktdimensioner4.5 x 4.5 x 3 tommer
Varens vægt4.8 ounce
Anbefalet alder12 måneder - 12 år

8. Garanti og support

Specific warranty information for this product is not provided in the available documentation. For support or warranty inquiries, please contact the retailer or manufacturer directly. Ensure you have your purchase details and product model number (YKQ TJ) available.

© 2023 SHENGLE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.