OttLite Restore LED Desk Lamp with 2.1A USB Port

1. Opsætning

Carefully remove all components from the packaging. Ensure all parts are present before proceeding with assembly and setup.

1.1 Montering

1. Placer lamp base på en stabil, flad overflade.
2. Indsæt lamp pole into the base and secure it by turning the knob clockwise until firm.
3. Fastgør lamp head to the top of the pole and tighten the adjustment knob to hold it in place.

1.2 Strømtilslutning

Plug the power cable into the port at the back of the lamp base, then connect the other end to a standard 120V electrical outlet.

Figure 1: Fully assembled OttLite Restore LED Desk Lamp with a phone charging via the integrated USB port.

2. Betjeningsvejledning

2.1 Tænd/sluk og justering af lysstyrke

Lamp features a touch-sensitive switch located on the base. Tap the switch to cycle through the three brightness levels and to turn the lamp slukket.

• Første berøring: Low Brightness (approx. 160 lumens)
• Anden berøring: Medium Brightness (approx. 320 lumens)
• Tredje berøring: High Brightness (approx. 485 lumens)
• Fjerde berøring: Slukket

Lamp includes a memory feature that remembers your last brightness setting when turned off and on again.

Figure 2: Location of the touch-sensitive power switch on the lamp grundlag.

2.2 Valg af farvetemperatur

Denne lamp offers three distinct color temperature modes to suit various tasks and preferences. To change the color temperature, press and hold the touch-sensitive switch for 2-3 seconds. The lamp will cycle through the following modes:

• ClearSun Natural Daylight (5000K): Provides balanced, natural light ideal for reading, crafting, and tasks requiring high color accuracy.
• Bright White (4000K): A cooler white light suitable for general illumination and focused work.
• Varm hvid (2700K): A softer, warmer light for relaxation or ambient lighting.

Figur 3: Den lamp's three adjustable color temperature settings.

2.3 USB-opladningsport

Lamp is equipped with a 5V, 2.1A USB port located on the base. This port allows you to charge compatible devices such as smartphones, smartwatches, and tablets. Simply connect your device's USB charging cable to the port.

Figure 4: Integrated 5V, 2.1A USB charging port on the lamp grundlag.

2.4 Justering af Lamp Position

The OttLite Restore lamp features an articulating neck and pivoting shade for optimal light positioning. You can adjust the height of the lamp from 9 inches to 22 inches. Loosen the adjustment knobs on the pole and near the lamp head to reposition, then tighten them to secure the desired angle and height.

Figure 5: Articulating neck and pivoting shade for flexible light direction.

Figur 6: Den lamp's adjustable height feature, ranging from 9 to 22 inches.

2.5 ClearSun LED Technology Overview

The OttLite Restore LED Desk Lamp utilizes proprietary ClearSun LED technology. This technology is designed to closely match the spectral output of natural sunlight, providing balanced and smooth lighting across the entire visual spectrum. This helps to reduce eyestrain by up to 51% and enhances color rendering, making colors appear more vivid and true-to-life (CRI of 97).

3. Vedligeholdelse

3.1 Rengøring

For at rense lamp, ensure it is unplugged from the power outlet. Use a soft, dry cloth to wipe down the surfaces. Do not use abrasive cleaners, solvents, or polishes as these may damage the finish or electrical components.

3.2 LED Lifespan

The integrated LEDs in this lamp are rated to last up to 40,000 hours under normal use. The LEDs are not user-replaceable. If the light source fails, the entire lamp unit may need to be replaced.

4. Fejlfinding

• Lamp tænder ikke:
  • Check if the power cable is securely plugged into both the lamp og stikkontakten.
  • Kontroller, at stikkontakten fungerer ved at tilslutte en anden enhed.
  • Ensure the touch-sensitive switch is being pressed correctly.
• USB-opladningsporten virker ikke:
  • Bekræft lamp is powered on and connected to a live electrical outlet.
  • Try a different USB cable or device to rule out issues with the cable or device.
• Lyset flimrer eller er inkonsekvent:
  • Ensure the power connection is stable and there are no loose connections.
  • Undgå at bruge lamp with dimmer switches not specifically designed for LED lighting, as this can cause flickering.

5. Specifikationer

6. Garantioplysninger

This OttLite Restore LED Desk Lamp er omfattet af en 3 års begrænset garanti. For specific terms and conditions, please refer to the warranty card included with your product or visit the official OttLite webwebsted.

7. Support

For further assistance, technical support, or to inquire about replacement parts, please contact OttLite Customer Service. Contact details can typically be found on the OttLite webwebstedet eller på produktemballagen.

Gem venligst denne manual til fremtidig reference.