1. Produktet er slutview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Nøglefunktioner:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Skærekapacitet: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Sikkerhedsvagt: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Sikkerhedsinstruktioner
Læs og forstå altid alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Manglende overholdelse af alle nedenstående instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.
Generelle sikkerhedsadvarsler:
- Bær passende personlige værnemidler (PPE), herunder sikkerhedsbriller, høreværn og handsker.
- Sørg for, at arbejdsområdet er rent, godt oplyst og fri for forhindringer.
- Hold børn og omkringstående væk, mens du betjener værktøjet.
- Never operate the tool if the power cord or plug is damaged.
- Afbryd altid strømforsyningen, før du foretager justeringer, skifter tilbehør eller udfører vedligeholdelse.
- Brug den korrekte klinge til det materiale, der skæres.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Komponenter overview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Motorenhed
- Vandreservoir
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Knivbeskyttelse
- Tænd/sluk-knap
- Bærehåndtag
Figur 1: Overview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Opsætning
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Udpakning og inspektion
- Fjern forsigtigt alle komponenter fra emballagen.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Sørg for, at alle anførte komponenter er til stede.
4.2 Fyldning af vandbeholderen
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Betjeningsvejledning
Follow these steps for safe and effective tile cutting.
5.1 Tænd/sluk
- Connect the tile cutter to a suitable power outlet (240 Volts).
- For at tænde, tryk på den grønne 'TIL'-knap.
- For at slukke, tryk på den røde 'SLUK'-knap.
Figure 4: Power switch for turning the machine on and off.
5.2 Lav et snit
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Official Product Video: How to Use
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Vedligeholdelse
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Cleaning the Water Reservoir
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Afbryd strømforsyningen.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Saml komponenterne igen.
6.2 Udskiftning af knive
Replace the diamond cutting disc when it becomes dull or damaged.
- Sørg for, at værktøjet er frakoblet.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Spænd fastholdelsesmøtrikken forsvarligt.
7. Fejlfinding
This section addresses common issues you might encounter with your tile cutter.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| Maskinen starter ikke | Ingen strømforsyning; defekt afbryder; motorproblem. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Einhell |
| Modelnummer | 4301185 |
| Magt | 800 watt |
| Voltage | 240 volt |
| Hastighed | 2950 RPM |
| Diamond Cutting Disc Diameter | 180 mm |
| Maks. skærehøjde (90°) | 34 mm |
| Maks. skærehøjde (45°) | 14 mm |
| Angle of Cut | 45 grader |
| Bordmål (L x B) | 39.6 cm x 38.5 cm |
| Produktmål (L x B x H) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Produktets vægt | 9.1 kilo |
| Strømkilde | Elektrisk med ledning |
| Særlige funktioner | Adjustable angle stop, parallel stop with scale |
9. Garanti og support
9.1 Garantioplysninger
This Einhell product comes with a 2 års begrænset garantiGem venligst din købsbevis i tilfælde af garantikrav.
9.2 Kundesupport
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webwebstedet eller din produktemballage for at få de mest opdaterede kontaktoplysninger.