Indledning
Thank you for choosing the Project Source 2-Pack 7.4-in W White LED Flush Mount Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
These LED flush mount ceiling lights are designed for both indoor and outdoor living spaces, featuring a wet-rated design. They are Energy Star rated for efficiency, provide a color temperature of 3000K, a Color Rendering Index (CRI) of 90, and an output of 730 lumens.
Sikkerhedsoplysninger
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, or personal injury.
- ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen til sikringen eller strømafbryderen før installation eller servicering.
- ADVARSEL: Brandfare. Brug kun i kredsløb, der er godkendt til armaturet.
- Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
- Undlad at ændre armaturet på nogen måde. Enhver ændring kan ugyldiggøre garantien og skabe en sikkerhedsrisiko.
- Sørg for, at alle forbindelser er sikre og korrekt isolerede.
- Do not install near heat sources or in areas with excessive moisture beyond its wet-rated capabilities.
- This product is designed for direct wire connection and does not use a plug.
Hvad er der i æsken
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- 2 x Project Source 7.4-in LED Flush Mount Light Fixtures
- Monteringshardware
- Fjernbetjening (Note: While the product data mentions a remote control, typical flush mount lights of this type do not include one. Please verify your specific package contents.)
Opsætning (Installation)
Installation should be performed by a qualified individual. Always ensure power is disconnected at the circuit breaker before starting.
- Sluk for strømmen: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltage tester.
- Forbered monteringsoverfladen: Sørg for, at el-boksen er sikkert monteret og i stand til at bære armaturets vægt.
- Tilslut ledninger: Connect the fixture's wires to the corresponding house wires using wire nuts (typically black to black, white to white, and ground to ground). Ensure all connections are tight and secure.
- Monteringsbeslag: Carefully align the fixture with the mounting holes on the electrical box and secure it using the provided mounting hardware.
- Gendan strøm: Når armaturet er sikkert installeret, skal strømmen genoprettes ved afbryderen.
Image: Two Project Source 7.4-inch white LED flush mount ceiling lights, showcasing their compact and low-profile design suitable for various indoor and outdoor applications.
Betjeningsvejledning
The Project Source LED Flush Mount Light operates like a standard ceiling light fixture. Once properly installed and power is restored, it can be controlled via a standard wall switch.
- Tænd/sluk: Tryk på vægkontakten, der er tilsluttet armaturet, for at tænde eller slukke lyset.
- Energieffektivitet: As an Energy Star rated LED fixture, it consumes significantly less energy than traditional incandescent bulbs, providing long-term savings.
Opretholdelse
These LED fixtures require minimal maintenance due to their long lifespan. However, occasional cleaning is recommended to maintain optimal light output and appearance.
- Rensning: Sørg for, at strømmen er slukket, inden rengøring. Brug en blød, tør eller let fugtet klud.amp cloth to wipe the surface of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- LED-levetid: The integrated LED light source is designed for long-term use and is not user-replaceable. If the LED fails, the entire fixture typically requires replacement.
Fejlfinding
Hvis du støder på problemer med din lampe, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strøm til armaturet; løse ledninger; defekt afbryder. | Kontroller afbryderen. Sørg for, at alle ledningsforbindelser er sikre. Test vægkontakten. |
| Lyse flimrer. | Løse ledninger; inkompatibel lysdæmper (hvis relevant); strømsvingninger. | Verify wire connections. Ensure the fixture is not connected to an incompatible dimmer. Consult an electrician for power issues. |
| Lysudbyttet er svagt eller ujævnt. | Dust accumulation on diffuser; aging LED components. | Clean the diffuser. If the issue persists and the fixture is old, it may be reaching the end of its lifespan. |
| Armaturet laver en brummende lyd. | Loose mounting; electrical interference. | Ensure fixture is securely mounted. Consult an electrician if noise persists. |
Specifikationer
- Modelnummer: CLL56-2WW
- Produktdimensioner: 7.4 x 7.4 x 1.4 tommer
- Vægt: 2.15 Pounds (per pack, total for 2 lights)
- Mærke: Projektkilde
- Farve: Hvid
- Lysarmaturform: Ceiling (Flush Mount)
- Indendørs/udendørs brug: Indoor/Outdoor (Wet Rated)
- Strømkilde: Ledningsbaseret elektrisk (direkte ledning)
- Lysoutput: 730 lumen
- Farvetemperatur: 3000K
- farvegengivelsesindeks (CRI): 90
- Energivurdering: Energy Star
Garanti og support
Project Source products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please contact Project Source customer service. Keep your purchase receipt as proof of purchase.
For assistance, please refer to the contact information provided on the product packaging or the official Project Source webwebsted.