FOSTEX PM0.3H(B) Active Speaker System User Manual

1. Introduktion

Tak for købetasing the FOSTEX PM0.3H(B) Active Speaker System. This manual provides essential information for the safe and efficient operation of your new speakers. Please read it thoroughly before use and retain it for future reference.

Nøglefunktioner:

• 2-way bass reflex design for balanced audio reproduction.
• Powerful 15W + 15W (RMS) output.
• Wide frequency response from 110Hz to 40kHz.
• Compact design suitable for various desktop audio setups.

2. Sikkerhedsoplysninger

Please observe the following safety precautions to prevent electric shock, fire, or other hazards:

• Vandeksponering: Do not use the device where water can directly come into contact with the main unit. This includes avoiding placement near sinks, bathtubs, or in excessively humid environments.
• Unormale forhold: Do not use the device if it is in an abnormal condition, such as emitting smoke, unusual odors, or strange noises. Immediately disconnect the power and contact customer support.
• Ventilation: Sørg for tilstrækkelig ventilation omkring højttalerne. Bloker ikke ventilationsåbningerne.
• Strømkilde: Use only the provided AC adapter and power cord. Ensure the power outlet matches the voltage krav.
• Håndtering: Håndter højttalerne forsigtigt. Undgå at tabe dem eller udsætte dem for hårde stød.

3. Pakkens indhold

Bekræft, at alle følgende varer er inkluderet i din pakke:

• FOSTEX PM0.3H(B) Active Speaker System (1 pair)
• AC Adapter
• Højttalerkabel (1.5m)
• Stereo Mini to RCA x 2 Cable (1.5m)
• Brugervejledning (dette dokument)

Image: FOSTEX PM0.3H(B) Active Speaker System with its accessories, including the AC adapter, speaker cable, and stereo mini to RCA cable.

Note: An unboxing video demonstrating the package contents and initial setup would typically be embedded here if available from the seller. This video would visually guide you through identifying each component.

4. Produktet er slutview

Familiarize yourself with the various parts and controls of your FOSTEX PM0.3H(B) Active Speaker System.

4.1 Foran View

Billede: Forside view of the active speaker, featuring the tweeter at the top, the woofer at the bottom, and the Fostex logo with a blue power indicator LED.

• Diskanthøjttaler: Reproduces high-frequency sounds.
• Woofer: Reproduces mid-range and low-frequency sounds.
• Strømindikator LED: Illuminates blue when the speaker is powered on.

4.2 Rear Panel (Active Speaker)

Image: Rear panel of the active speaker, detailing the volume control knob, RCA input (Input A), stereo mini input (Input B), L-OUT for connecting to the passive speaker, and the DC power input.

• VOLUME knap: Justerer den samlede lydstyrke. Drej med uret for at øge, mod uret for at mindske.
• INPUT A (RCA): Stereo RCA input jacks for connecting audio sources.
• INPUT B (Stereo Mini): 3.5mm stereo mini-jack input for connecting portable audio devices or computers.
• L-OUT: Output terminal for connecting the active speaker to the passive speaker using the supplied speaker cable.
• DC IN: Power input jack for the AC adapter.
• Serienr.: Unique serial number for the unit.

4.3 Rear Panel (Passive Speaker)

Image: Rear panel of the passive speaker, showing the L-IN input for connection to the active speaker.

• L-IN: Input terminal for connecting the passive speaker to the active speaker using the supplied speaker cable.

5. Opsætning

5.1 Højttalerplacering

Place the speakers on a stable, flat surface. For optimal stereo imaging, position the speakers equidistant from your listening position, forming an equilateral triangle. Ensure there is sufficient space behind the speakers for ventilation and cable connections.

5.2 Tilslutning af højttalerne

1. Connect the supplied speaker cable (1.5m) from the L-UD terminal on the active speaker to the L-IN terminal on the passive speaker. Ensure a secure connection.

5.3 Tilslutning af lydkilder

You can connect audio sources using either the RCA inputs or the stereo mini input:

• RCA Input (INPUT A): Use the supplied stereo mini to RCA x 2 cable to connect devices with RCA outputs (e.g., CD players, audio interfaces) to the INDGANG A stik.
• Stereo Mini Input (INPUT B): Use a 3.5mm stereo mini cable (not supplied, unless the stereo mini to RCA cable is used with an adapter) to connect devices with a stereo mini output (e.g., smartphones, computers) to the INDGANG B stik.

5.4 Tilslutning af strøm

1. Connect the supplied AC adapter to the DC IN jack on the active speaker.
2. Plug the AC adapter into a suitable wall outlet. The power indicator LED on the front of the active speaker will illuminate blue.

6. Betjeningsvejledning

6.1 Tænd/sluk

The speakers power on automatically when the AC adapter is connected to a power source. To turn off the speakers, disconnect the AC adapter from the wall outlet.

6.2 Justering af lydstyrke

Drej på BIND knob on the rear panel of the active speaker to adjust the sound level. Turn clockwise to increase volume and counter-clockwise to decrease it. Start with a low volume and gradually increase it to a comfortable listening level.

6.3 Indgangsvalg

The PM0.3H(B) supports two audio inputs (RCA and Stereo Mini). If both inputs are connected, the speaker system will mix the audio signals. To listen to a single source, ensure only that source is connected or powered on.

7. Vedligeholdelse

7.1 Rengøring

• Before cleaning, disconnect the power adapter from the wall outlet.
• Wipe the speaker cabinets with a soft, dry cloth.
• Brug ikke slibende rengøringsmidler, voks eller opløsningsmidler, da de kan beskadige finishen.

7.2 Opbevaring

When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to keep the original packaging for safe storage and transport.

8. Fejlfinding

If you encounter any issues with your FOSTEX PM0.3H(B) speakers, refer to the following common problems and solutions:

8.1 Ingen lyd

• Tjek strøm: Ensure the AC adapter is securely connected to both the speaker and a working wall outlet. Verify the power indicator LED is blue.
• Tjek lydstyrke: Confirm the VOLUME knob on the active speaker is not set to minimum (OFF) and the volume on your audio source is turned up.
• Tjek forbindelser: Ensure all audio cables (RCA, stereo mini, and the speaker cable between active and passive units) are securely connected.
• Test af lydkilde: Try connecting a different audio source to rule out issues with your primary device.

8.2 Forvrænget lyd

• Juster lydstyrkeniveauer: Reduce the volume on both the speakers and your audio source. Overdriving either can cause distortion.
• Tjek kabelkvalitet: Ensure audio cables are not damaged or poorly shielded, which can introduce noise.
• Kildekvalitet: Lyd af lav kvalitet files or streaming can result in distorted sound.

8.3 Only One Speaker Producing Sound

• Højttalerkabel: Verify the speaker cable connecting the active and passive units is properly and securely connected at both ends.
• Audio Source Balance: Check the balance settings on your audio source.
• Indgangsforbindelse: Ensure the stereo mini or RCA cables are fully inserted and not loose.

9. Specifikationer

Image: Dimensions of a single FOSTEX PM0.3H(B) speaker.

10. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official FOSTEX webwebsted. Gem din købsbevis til garantikrav.

FOSTEX Official Webwebsted: www.fostex.jp