Motorola PMNN4485A IMPRES 2 Li-Ion Battery User Manual

1. Produktet er slutview

The Motorola PMNN4485A is an IMPRES 2 Li-Ion battery designed for rugged use, offering a capacity of 2550mAh. This battery is engineered to provide reliable power for compatible Motorola radios, ensuring extended operational periods.

Front view of the Motorola PMNN4485A IMPRES 2 Li-Ion Battery

Figur 1: Forside view of the Motorola PMNN4485A IMPRES 2 Li-Ion Battery, showing its robust construction.

Nøglefunktioner:

Kapacitet: 2550 mAh for extended use.
Holdbarhed: Rugged design suitable for demanding environments.
Teknologi: Features IMPRES 2 technology for optimized battery life and charging.
Kompatibilitet: Replaces model PMNN4403.

Tilbage view of the Motorola PMNN4485A IMPRES 2 Li-Ion Battery with specifications

Figur 2: Tilbage view of the battery, displaying technical labels including "IMPRES 2", "Li-ion", "7.6V / 2550mAh", and recycling symbols.

2. Sikkerhedsoplysninger

Read all instructions and cautionary markings on the battery, charger, and radio before use. Failure to do so may result in property damage, personal injury, or death.

Undlad at skille ad, knuse, punktere, kortslutte eksterne kontakter eller smide dem i ild eller vand.
Use only Motorola approved chargers for this battery.
Udsæt ikke batteriet for temperaturer over 60°C (140°F).
Hold batteriet væk fra børn.
If the battery is damaged, discontinue use immediately.

3. Opsætning og installation

This section outlines the process for installing the PMNN4485A battery into a compatible Motorola radio.

Installation af batteriet:

Ensure the radio is powered off before attempting to install or remove the battery.
Juster batteriet med batterirummet på bagsiden af radioen.
Slide the battery into place until it clicks securely. Ensure there is no gap between the battery and the radio body.
To remove, locate the battery release latch (if present on your radio model), depress it, and slide the battery off.

Three Motorola APX 8000 radios, demonstrating compatible devices for the battery

Figur 3: Eksamples of compatible Motorola APX 8000 radios where the PMNN4485A battery can be installed.

4. Betjeningsvejledning

The Motorola PMNN4485A battery is designed for use with Motorola IMPRES 2 chargers. Proper charging ensures optimal battery performance and longevity.

Opladning af batteriet:

Connect the Motorola IMPRES 2 charger to a power source.
Place the radio with the installed battery into the charger slot. Ensure it is seated correctly.
Observe the charger's indicator lights. A red light typically indicates charging is in progress.
An orange light may indicate reconditioning or recalibration, which is a normal process for IMPRES batteries to optimize performance. If you wish to bypass reconditioning, remove the radio and re-insert it into the charger.
Et grønt lys angiver, at batteriet er fuldt opladet.

Video 1: Demonstration of charging a Motorola APX 8000 radio with the IMPRES 2 battery using a compatible charger. The video illustrates the reconditioning process (orange light) and standard charging (red light).

The IMPRES 2 charging system is designed to automatically recondition and recalibrate batteries as needed, extending their service life and ensuring consistent performance.

5. Vedligeholdelse

Proper maintenance helps prolong the life and performance of your Motorola PMNN4485A battery.

Rensning: Periodically clean the battery contacts and charger contacts with a clean, dry cloth to ensure good electrical connection.
Opbevaring: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, charge the battery to approximately 50% capacity.
Undgå dyb udflåd: While IMPRES 2 technology manages battery health, avoiding complete discharge before recharging can contribute to overall battery longevity.

6. Fejlfinding

If you encounter issues with your PMNN4485A battery, refer to the following common problems and solutions:

Problem	Mulig årsag	Løsning
Battery not charging (charger light off or error)	Improper seating in charger. Dirty battery/charger contacts. Faulty charger or power supply. Batteriet er for varmt/koldt.	Re-seat the radio/battery firmly in the charger. Rengør kontakter med en tør klud. Try a different charger or power outlet. Lad batteriet nå stuetemperatur.
Kort driftstid efter fuld opladning	Battery nearing end of service life. Battery requires reconditioning/recalibration.	Allow the IMPRES 2 charger to perform reconditioning (orange light). Consider replacing the battery if performance does not improve.
Radio displays "NON-IMPRESS BATTERY" error	Battery is not a genuine IMPRES 2 battery. Battery is damaged or incompatible.	Ensure you are using a genuine Motorola IMPRES 2 battery. Contact Motorola support if the issue persists with a genuine battery.

7. Specifikationer

Feature	Detalje
Modelnummer	PMNN4485A
Batteritype	Lithium Ion (Li-Ion)
Kapacitet	2550 mAh
Voltage	3.85 volt
Teknologi	IMPRES 2
Holdbarhed	Robust
Genanvendelighed	Genopladelig
Kompatible enheder	Motorola radios (e.g., APX 8000 series)
Replaces Model	PMNN4403
Emnedimensioner	3 x 3 x 4 tommer (omtrentligt, til emballage)

8. Garanti og support

For specific warranty information regarding your Motorola PMNN4485A battery, please refer to the documentation provided with your purchase or visit the official Motorola website. Support for this product is typically handled through authorized Motorola dealers or service centers.

Note: The product data provided did not include specific warranty terms. Please consult official Motorola resources for the most accurate and up-to-date warranty details.