StarTech.com MSTDP123DP 3-Port DisplayPort 1.2 Splitter User Manual

Indledning

The StarTech.com MSTDP123DP is a 3-Port DisplayPort 1.2 Multi-Stream Transport (MST) Hub designed to connect multiple DisplayPort monitors to a single DisplayPort output on your Windows computer. This device allows for extended or mirrored display configurations, enhancing productivity by utilizing up to three independent displays. It supports resolutions up to dual 4K at 30Hz and 1080p at 60Hz, depending on the system's capabilities and bandwidth allocation. This MST Hub is compatible with DisplayPort 1.2 / HBR2 / MST enabled systems and is intended for use with Windows operating systems only.

Produkt overview

Familiarize yourself with the components of your StarTech.com MSTDP123DP 3-Port DisplayPort 1.2 Splitter.

Billede: Front view of the StarTech.com MSTDP123DP 3-Port DisplayPort 1.2 Splitter, showing three DisplayPort output ports labeled "OUTPUT".

Billede: Bag view of the StarTech.com MSTDP123DP 3-Port DisplayPort 1.2 Splitter, showing the power input port and the integrated DisplayPort input cable.

Billede: Diagram illustrating the dimensions of the MSTDP123DP hub and the included universal power adapter with various regional plugs.

Opsætningsinstruktioner

Follow these steps to set up your MST Hub and connect multiple displays.

1. Bekræft systemkompatibilitet:

   Ensure your computer's video card supports DisplayPort 1.2 / HBR2 / MST. You can check your video card model in Windows Device Manager (Right-click the Windows icon or press Windows key + "X", then select Device Manager, and expand "Display adapters").

2. Connect the MST Hub to your Device:

   Plug the integrated DisplayPort cable from the MST Hub into a compatible DisplayPort output on your computer, laptop, or tablet.

   Video: This video demonstrates the physical connection of the MST Hub to a laptop's DisplayPort output and the subsequent power connection.
3. Connect Power to the MST Hub:

   Plug the included power adapter into the MST Hub's power input port, then connect the power adapter to a wall outlet.

4. Connect Displays to the MST Hub:

   Plug your DisplayPort cables (or DisplayPort adapters/converters for HDMI, VGA, or DVI monitors) into the DisplayPort output ports on the MST Hub. Connect the other end of these cables to your monitors.

5. Power On Your Device:

   Power on your computer and log in to your Windows operating system.

Operating Instructions: Display Configuration

After connecting your displays, you will need to configure them within Windows Display Settings.

1. Access Display Settings:

   Højreklik på et tomt område på skrivebordet og vælg "Skærmindstillinger".
2. Arranger displays:

   In the Display settings window, you will see representations of your connected monitors. Click the "Identify" button to see which number corresponds to each physical monitor. Drag and drop the monitor representations to match their physical arrangement on your desk.

3. Vælg visningstilstand:

   Under "Multiple displays", choose your desired display mode:

   • Udvid disse skærme: Each monitor acts as a separate workspace, allowing you to spread applications across multiple screens.
   • Kopier disse skærme: Alle skærme viser det samme indhold.
   

   Billede: Visual representation of Extended Mode (independent content on each display) and Mirror Mode (same image on multiple displays).

4. Anvend indstillinger:

   Click "Apply" to save your display configuration.

Resolution and Bandwidth Considerations

The maximum resolution output depends on your system's video card capabilities and the total bandwidth used by all connected displays. MST technology shares video bandwidth across all attached displays.

Billede: Table detailing various video output resolutions (e.g., 1920x1200@60Hz, 2560x1440@60Hz, 3840x2160@30Hz) for three displays and their corresponding total bandwidth percentage usage. Note that 4K@30Hz is supported on two displays, with the third display at 1080p@60Hz or lower.

Specifikationer

Fejlfinding

• Ingen visning eller forkert opløsning:
  • Ensure all cables (DisplayPort and power) are securely connected.
  • Verify that your computer's graphics card supports DisplayPort 1.2 and MST.
  • Opdater dine grafikkortdrivere til den nyeste version fra producentens webwebsted.
  • Check Windows Display Settings to ensure displays are detected and configured correctly (extended or duplicated).
  • Reduce the resolution of one or more displays if you are exceeding the total available bandwidth of your graphics card or the MST Hub. Refer to the Resolution and Bandwidth Considerations section.
• Displays Not Detected:
  • Restart your computer after connecting all displays.
  • Ensure the MST Hub is receiving power.
  • Test each display individually to confirm they are functional.
  • If using DisplayPort to HDMI/VGA/DVI adapters, ensure they are active adapters and compatible with DisplayPort 1.2.
• Intermittent Display Signal:
  • Tjek for løse kabelforbindelser.
  • Ensure DisplayPort cables are of high quality and meet DisplayPort 1.2 specifications.
  • Avoid excessive cable lengths.

Opretholdelse

To ensure the longevity and optimal performance of your MST Hub, consider the following maintenance tips:

• Hold enheden ren og fri for støv. Brug en blød, tør klud til rengøring.
• Undgå at udsætte enheden for ekstreme temperaturer, fugt eller direkte sollys.
• Sørg for korrekt ventilation omkring enheden for at forhindre overophedning.
• Håndter kabler forsigtigt for at undgå beskadigelse af stik og porte.

Garantioplysninger

The StarTech.com MSTDP123DP 3-Port DisplayPort 1.2 Splitter is backed by a 3 års garanti. For detailed warranty terms and conditions, please refer to the official StarTech.com webwebsted eller kontakt deres kundesupport.

Teknisk support

StarTech.com offers free lifetime technical support for this product. If you encounter any issues or require assistance with installation or operation, please visit the StarTech.com website for support resources, FAQs, and contact information for their technical support team.

Webwebsted: www.StarTech.com