Einhell Rotary Hammer TC-RH 800 E Instruction Manual

1. Introduktion

Thank you for choosing the Einhell TC-RH 800 E Rotary Hammer. This powerful tool is designed for drilling, hammer drilling, and chiseling in concrete, masonry, wood, and metal. It features an 800W motor, 2.5 Joules of impact energy, and an SDS Plus chuck for quick and secure bit changes. Please read this manual thoroughly before operating the tool to ensure safe and efficient use.

2. Generelle sikkerhedsinstruktioner

Overhold altid følgende sikkerhedsforanstaltninger, når du bruger elværktøj:

• Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Stik på elværktøj skal passe til stikkontakten. Modificer aldrig stikket på nogen måde. Undgå kropskontakt med jordforbundne overflader såsom rør, radiatorer, komfurer og køleskabe.
• Personlig sikkerhed: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din anvendelse. Tag stikket ud af strømkilden, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
• Service: Få dit elværktøj efterset af en kvalificeret reparatør, der kun bruger identiske reservedele. Dette vil sikre, at elværktøjets sikkerhed opretholdes.

3. Produktkomponenter

Familiarize yourself with the main components of your Einhell TC-RH 800 E Rotary Hammer:

• SDS Plus Chuck
• Hjælpehåndtag
• Dybdestop
• Funktionsvælger (boremaskine, slagboremaskine, mejsel)
• Rotation Direction Switch (Forward/Reverse)
• On/Off Trigger with Speed Control
• Lock-on Button (for continuous operation)

Figur 1: Overview of the Einhell TC-RH 800 E Rotary Hammer.

Figure 2: The rotary hammer in use, demonstrating its application for drilling into a wall.

Figur 3: Nærbillede view of the SDS Plus chuck, designed for quick and secure bit changes.

Figure 4: Detail of the rotation direction switch, allowing selection between forward and reverse rotation.

Figure 5: The ergonomic main handle designed for comfortable and secure grip.

Figure 6: The adjustable depth stop, used to set a precise drilling depth.

Figure 7: Einhell brand logo prominently displayed on the tool body, indicating authenticity.

4. Opsætning

4.1 Montering af hjælpehåndtaget

The auxiliary handle provides additional grip and control. Loosen the auxiliary handle by turning it counter-clockwise. Slide it onto the tool body to the desired position and tighten it clockwise.

4.2 Montering af dybdestoppet

Insert the depth stop rod into the designated hole on the auxiliary handle. Adjust the depth stop to the required drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.

Figure 8: The SDS Plus chuck with the depth stop rod correctly installed.

4.3 Inserting SDS Plus Drill Bits/Chisels

1. Clean the shank of the drill bit or chisel and apply a thin layer of grease.
2. Pull back the chuck sleeve and insert the bit into the chuck, rotating it slightly until it engages.
3. Release the chuck sleeve. Pull the bit to check if it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.

5. Betjeningsvejledning

5.1 Valg af tilstand

The mode selector switch allows you to choose the appropriate operating mode:

• Boring (kun rotation): For drilling in wood, metal, or plastics.
• Hammer Drilling (Rotation with Impact): Til boring i beton og murværk.
• Chiseling (Impact Only): For light chiseling work, such as removing tiles or plaster.

To change the mode, rotate the selector switch to the desired symbol. Ensure the tool is unplugged before changing modes, especially for chiseling, to prevent accidental activation.

5.2 Tænd/sluk og hastighedskontrol

Press the On/Off trigger to start the tool. The speed is variable depending on how far you press the trigger. For continuous operation, press the lock-on button while the trigger is fully depressed. To switch off, release the trigger or press it again if the lock-on button is engaged.

5.3 Rotationsretning

Use the rotation direction switch (Figure 4) to select forward or reverse rotation. Forward rotation is for drilling and hammer drilling. Reverse rotation is primarily for unscrewing or freeing jammed drill bits. Change the rotation direction only when the tool is switched off.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din borehammeres lange levetid og optimale ydeevne.

• Rensning: Keep the ventilation slots clean to prevent overheating. Wipe the tool housing with a soft, damp klæde. Brug ikke skrappe rengøringsmidler eller opløsningsmidler.
• Vedligeholdelse af borepatron: Regularly clean the SDS Plus chuck and apply a small amount of special grease to the bit shanks to ensure smooth operation and prevent wear.
• Ledningsinspektion: Periodically inspect the power cord for any damage. If damaged, have it replaced by a qualified technician.
• Opbevaring: Store the tool in its original case in a dry, secure place, out of reach of children.

7. Fejlfinding

8. Tekniske specifikationer

9. Garantioplysninger

Einhell products are manufactured to high-quality standards and are subject to strict quality controls. This product is covered by the manufacturer's warranty in accordance with the country-specific legal provisions. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell webwebsted.

10. Support

Should you have any questions regarding the operation, maintenance, or troubleshooting of your Einhell TC-RH 800 E Rotary Hammer, please contact Einhell customer service or visit our official webwebsted for yderligere hjælp og ressourcer.

Officiel Webwebsted: www.einhell.com