Lesco High Wheel Fertilizer Spreader 101186 User Manual

Introduktion og overview

This manual provides essential information for the safe and effective use of your Lesco High Wheel Fertilizer Spreader with Manual Deflector, model 101186. This spreader is designed for applying granular fertilizers, grass seed, salt, and ice melt. It features an 80 lbs hopper capacity, extra-large pneumatic tires for stability, and an all stainless steel frame, axle, and impeller shaft for durability. This model replaces the discontinued Lesco 091186 model.

Image: The Lesco High Wheel Fertilizer Spreader 101186, featuring its green hopper, large wheels, and metal frame.

Sikkerhedsoplysninger

Always prioritize safety when operating the spreader. Follow these guidelines:

• Wear appropriate protective clothing, including gloves and eye protection, when handling granular products.
• Keep the spreader and all granular products out of reach of children and pets.
• Avoid contaminating water sources with fertilizer or other chemicals.
• In case of accidental ingestion of granular products, seek medical advice immediately.
• Always follow the manufacturer's instructions for use and storage of any granular products used with the spreader.

Opsætning og montering

Some assembly is required for the Lesco High Wheel Fertilizer Spreader 101186. Refer to the included instructions for detailed assembly steps. The general process involves:

1. Pak forsigtigt alle komponenter ud, og kontrollér dem med reservedelslisten.
2. Assemble the main frame and attach the hopper securely.
3. Install the wheels onto the axle.
4. Fastgør håndtagsenheden.
5. Connect the control cables for the deflector and agitator mechanisms.
6. Adjust the handles to a comfortable operating position for ergonomic use.

Ensure all fasteners are tightened securely before initial use.

Betjeningsvejledning

Follow these steps for effective operation of your spreader:

1. Prepare the Spreader: Ensure the spreader is clean and free of debris from previous use. Check that all moving parts operate smoothly.
2. Fyld beholderen: Fill the hopper with up to 80 lbs. of your chosen granular product (fertilizer, seed, salt, or ice melt). Distribute the product evenly within the hopper.
3. Adjust the Flow Rate: Locate the flow rate adjustment mechanism, typically a lever or dial, on the spreader. Adjust it according to the product manufacturer's recommendations for the desired application rate.
4. Engage the Agitator: The oscillating agitator ensures proper product flow. Ensure it is engaged before beginning to spread.
5. Use the Manual Deflector: The manual deflector allows you to control the distribution pattern of the product. Adjust it to prevent spreading material into unwanted areas like flowerbeds or paved surfaces.
6. Begin Spreading: Push the spreader at a consistent walking pace. The extra-large pneumatic tires and adjustable handles are designed to facilitate easy application over various terrains.
7. Overlappende pas: To ensure even coverage, slightly overlap each pass with the spreader.
8. Tøm og rengør: After use, empty any remaining product from the hopper. Clean the hopper and all moving parts thoroughly to prevent corrosion and product buildup.

Opretholdelse

Regular maintenance ensures the longevity and optimal performance of your Lesco spreader:

• Rensning: After each use, especially when spreading corrosive materials like salt, thoroughly rinse the hopper, agitator, and impeller with water. Dry all metal parts to prevent rust.
• Smøring: Periodically lubricate moving parts such as the axle, gearbox, and control cables with a suitable lubricant to ensure smooth operation.
• Inspektion: Regularly inspect the tires for proper inflation and wear. Check all nuts, bolts, and connections for tightness. Inspect the stainless steel frame for any signs of damage or corrosion.
• Opbevaring: Store the spreader in a clean, dry place, protected from the elements.

Fejlfinding

If you encounter issues with your spreader, consider the following common problems and solutions:

• Uneven Spreading:
  • Check the flow rate setting to ensure it matches the product and desired application.
  • Verify that the agitator is functioning correctly and not obstructed.
  • Ensure the product in the hopper is not clumping or wet.
  • Maintain a consistent walking speed during application.
• Product Not Dispensing:
  • Confirm the flow gate is open.
  • Check for clogs in the hopper or dispensing mechanism.
  • Ensure the agitator is engaged and rotating.
• Difficulty Pushing:
  • Check tire pressure; ensure tires are adequately inflated.
  • Inspect wheels and axle for obstructions or damage.
  • Ensure the hopper is not overloaded beyond its 80 lbs capacity.

For persistent issues, contact customer support or a qualified service technician.

Specifikationer

Garanti og support

For warranty information, please refer to the documentation included with your product at the time of purchase. For technical support, replacement parts, or further assistance, please contact Lesco customer service through their official webwebstedet eller kontaktoplysningerne på din produktemballage.