Intermatic UWZ48E-240U Hour Meter Instruction Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of the Intermatic UWZ48E-240U Hour Meter. This device is designed to accurately record operating hours for various electrical equipment. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

2. Sikkerhedsoplysninger

ADVARSEL: Risk of electric shock. Installation and servicing should be performed by qualified personnel only. Disconnect power at the circuit breaker or fuse box before installing or servicing the unit.

• Følg altid lokale elektriske forskrifter og regler.
• Ensure the power supply matches the meter's voltage rating (240V AC, 60Hz).
• Brug ikke måleren, hvis den ser ud til at være beskadiget.
• Hold børn væk fra elektriske installationer.

3. Produktet er slutview

The Intermatic UWZ48E-240U is a flush-mount hour meter designed for precise time tracking. It features a clear display for accumulated hours and offers both quick connect and screw terminals for versatile wiring options.

Figur 1: Front view of the Intermatic UWZ48E-240U Hour Meter. The image shows the meter's face with the Intermatic logo, a six-digit hour display, and electrical ratings (UWZ 48-L, 110-127V~ 60Hz). Please note that while the image displays 110-127V, the product model UWZ48E-240U is rated for 240V AC, 60Hz as per specifications. Dimensions of 1.79 inches by 1.79 inches are indicated on the sides.

3.1 Nøglefunktioner:

• Flush mount design with retaining bracket.
• Combo quick connect and screw terminals.
• 240V AC, 60Hz operation.
• Holdbar plastkonstruktion.
• Compact dimensions: 1.79"W x 1.79"H.

4. Installation

4.1 Montering

1. Sørg for, at strømmen er afbrudt ved kilden.
2. Create a panel cutout of 1.79" x 1.79" (45.5 x 45.5 mm). The panel thickness can be up to 0.35" (9 mm).
3. Insert the hour meter into the cutout from the front of the panel.
4. Secure the unit in position using the provided plastic slip-on retaining bracket from the rear of the panel.
5. Valgfri: For 72 mm square or round openings, an optional 72 mm bezel can be used (not included).

4.2 Ledningsføring

The UWZ48E-240U features combo quick connect and screw terminals. Connect the meter in parallel with the load or circuit you wish to monitor. Ensure correct voltage (240V AC, 60Hz) is supplied to the meter terminals.

• Hurtig forbindelse: Use appropriate spade connectors for a secure connection.
• Skrueterminaler: Strip wire insulation to the recommended length, insert into the terminal, and tighten the screw firmly.

Efter ledningsføring skal du sørge for, at alle forbindelser er sikre og isolerede, før du genopretter strømmen.

5. Betjening

The Intermatic UWZ48E-240U Hour Meter operates automatically when power is supplied to its terminals. The mechanical display will increment, showing the total accumulated operating hours. The meter does not have a reset function, providing a continuous record of equipment usage.

• The display shows hours in a six-digit format, typically with the last digit representing tenths of an hour.
• No user interaction is required for operation once installed and powered.

6. Vedligeholdelse

The UWZ48E-240U Hour Meter is designed for maintenance-free operation. However, periodic inspection is recommended to ensure optimal performance.

• Rensning: If necessary, gently wipe the display window with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Inspektion: Periodically check wiring connections for tightness and ensure the meter is securely mounted.
• Miljøforhold: Ensure the operating environment remains within the specified temperature range (up to 160°F / 71°C).

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please refer to the official Intermatic webwebstedet eller kontakt deres kundeserviceafdeling. Behold din købskvittering som købsbevis.

Du kan besøge Intermatic-butik på Amazon for mere produktinformation.