Progress Lighting P5821-20 1-Light Compact Fluorescent Wall Lantern

1. Produktet er slutview

The Progress Lighting P5821-20 is a 1-light energy-efficient compact fluorescent wall lantern designed for outdoor use. It features a transitional styling with an antique bronze finish and a matte white acrylic diffuser. This fixture is rated for use in wet locations and complies with California Title-24 requirements, making it suitable for porches, patios, and other exterior wall applications.

This image shows the Progress Lighting P5821-20 1-Light Energy Efficient Compact Fluorescent Wall Lantern in an antique bronze finish, featuring a classic design with a matte white acrylic diffuser.

2. Sikkerhedsoplysninger

• ADVARSEL: Afbryd strømmen til afbryderen eller sikringsboksen før installation eller service.
• Alle elektriske forbindelser skal være i overensstemmelse med lokale forskrifter, forordninger eller National Electric Code (NEC). Kontakt en kvalificeret elektriker, hvis du ikke er bekendt med korrekt elektrisk ledningsføring.
• This product may be subject to California Proposition 65 rules and regulations. For more information, visit www.P65Warnings.ca.gov.
• Do not install this fixture in areas where it may be submerged in water. While rated for wet locations, it is not designed for submersion.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1-Light Wall Lantern (P5821-20)
• Matte White Acrylic Diffuser
• Robust aluminiumshus
• Mounting Hardware (typically includes mounting strap, screws, wire nuts)
• Note: A compact fluorescent light source (bulb) is ikke inkluderet og skal købes separat.

4. Opsætning og installation

Nødvendige værktøjer: Screwdriver, wire strippers, electrical tape, safety glasses.

1. Sluk for strømmen: Before starting, ensure the power to the installation area is completely off at the circuit breaker or fuse box.
2. Forbered ledningsføring: Carefully remove the existing fixture (if any) and expose the electrical wires from the junction box.
3. Attach Mounting Strap: Secure the provided mounting strap to the junction box using the screws.
4. Foretag elektriske forbindelser: Connect the fixture's wires to the house wires according to local electrical codes. Typically, connect black to black (live), white to white (neutral), and bare copper or green to bare copper or green (ground). Secure connections with wire nuts and electrical tape.
5. Monteringsbeslag: Carefully tuck the wires into the junction box and align the fixture with the mounting strap. Secure the fixture to the mounting strap using the provided screws.
6. Installer lyskilde: Insert a compatible compact fluorescent bulb (not included) into the fixture's socket. Refer to the specifications for the correct wattage.
7. Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved afbryderen.

Vigtig: Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret elektriker.

5. Betjeningsvejledning

This wall lantern operates via a standard wall switch connected to its electrical circuit. Once installed and powered, simply toggle the wall switch to turn the light on or off.

• Lyskildetype: Kompakt Fluorescerende
• Maks. Watttage: 13 watt

6. Vedligeholdelse

• Rensning: Sørg for, at strømmen er slukket for at rengøre armaturet. Tør af med en blød, tør klud.amp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or acrylic diffuser.
• Udskiftning af pære: Ensure power is off before replacing the bulb. Allow the old bulb to cool completely before removal. Replace with a new compact fluorescent bulb of the same type and wattage (13 Watts maximum).
• Inspektion: Undersøg regelmæssigt armaturet for tegn på slid, skader eller løse forbindelser. Ret eventuelle problemer omgående.

7. Fejlfinding

If the wall lantern does not operate correctly, perform the following checks:

• Intet lys:
  • Sørg for, at vægkontakten er i 'ON'-positionen.
  • Check the circuit breaker or fuse for the fixture's circuit. Reset if tripped or replace fuse if blown.
  • Verify the light bulb is securely screwed in and is not burnt out. Replace if necessary.
  • Confirm that all electrical connections are secure and properly wired. (ADVARSEL: Turn off power before checking wiring.)
• Flimrende lys:
  • Check for a loose bulb or loose wiring connections.
  • Ensure the bulb is the correct type and wattage for armaturet.

If issues persist after performing these checks, consult a qualified electrician.

8. Specifikationer

This image illustrates the dimensions of the P5821-20 wall lantern, measuring 8.75 inches in height, 7.25 inches in length, and 5.75 inches in width.

9. Garanti og support

Dette Progress Lighting-produkt er dækket af en 1 års garanti from the date of purchase. For detailed warranty information, please refer to the official warranty document provided by Progress Lighting, which can typically be found on their website or via the link: https://hubbellcdn.com/warranty/prog_93049973_d_warranty.pdf.

For technical support, replacement parts, or further assistance, please contact Progress Lighting directly. Contact information can usually be found on the manufacturer's webwebstedet eller på produktemballagen.