1. Sikkerhedsoplysninger
Always read and understand all safety warnings and instructions before operating this tool. Failure to follow these warnings and instructions may result in serious injury.
- Øjenbeskyttelse: Always wear ANSI Z87.1 approved eye protection when operating or performing maintenance on this tool.
- Høreværn: Wear appropriate hearing protection to prevent hearing damage.
- Lufttilførsel: This is a pneumatic tool. Ensure a clean, dry, regulated air supply is connected. Do not exceed the maximum operating pressure.
- Korrekt brug: Brug kun værktøjet til dets tilsigtede formål. Undlad at ændre værktøjet.
- Sikkert arbejdsemne: Always secure the workpiece before operating the tool.
- Undgå kontakt: Hold hænder, hår og løstsiddende tøj væk fra bevægelige dele.
- Frakobl luften: Afbryd lufttilførslen, før du skifter tilbehør, udfører vedligeholdelse eller når værktøjet ikke er i brug.
- Forslag 65 Advarsel: Dette produkt kan indeholde kemikalier, som staten Californien kender til at forårsage kræft og fosterskader eller anden reproduktionsskade.
2. Produktet er slutview
The Ingersoll Rand 2115QTiMAX 3/8" Drive Air Impact Wrench is designed for heavy-duty assembly and disassembly applications, suspension work, and industrial equipment repair. It combines powerful performance with a compact, lightweight design and quiet operation.
Nøglefunktioner:
- Pro Performance: Delivers up to 300 ft-lbs of torque in reverse, suitable for various automotive and industrial tasks.
- Quiet Technology: Features Quiet Tool technology to reduce sound levels caused by air pulsating through the 7-vane motor, enhancing user comfort.
- Letvægtsdesign: Measures less than 6 inches and weighs under 2.5 lbs, offering an excellent power-to-weight ratio and improved access to tight spaces.
- Superior Control: Equipped with a feather-touch trigger for precise control and a 4-position power regulator for adjustable output.
- Durable Reliability: Constructed with a titanium hammer case and steel wear plate for protection against harsh environments and drops.
Figure 2.1: Ingersoll Rand 2115QTiMAX 3/8" Drive Air Impact Wrench, showcasing dens kompakte design.
Figure 2.2: Detail of the one-handed forward/reverse push button controls and the robust construction of the tool.
Figure 2.3: Visual representation of the tool's impressive features, including its 300 ft-lbs of maximum torque.
3. Opsætning
3.1 Tilslutning til luftforsyning
- Ensure your air compressor is off and depressurized.
- Apply thread sealant tape to the male threads of the air inlet fitting.
- Thread the air inlet fitting into the tool's air inlet port.
- Connect an air hose with a quick-connect coupler to the air inlet fitting.
- Set your air compressor regulator to the recommended operating pressure (typically 90 PSI / 6.2 bar).
- Tænd luftkompressoren og kontroller for lækager.
3.2 Montering af stikkontakter
The 2115QTiMAX features a friction ring anvil for quick and secure socket changes.
- Sørg for, at værktøjet er frakoblet luftforsyningen.
- Align the square drive of the socket with the anvil on the tool.
- Push the socket firmly onto the anvil until it clicks into place. The friction ring will hold the socket securely.
- For at fjerne den, træk fatningen fast af ambolten.
4. Betjeningsvejledning
4.1 Forward/Reverse Mechanism
The tool features a one-handed forward/reverse mechanism located at the rear of the tool for easy direction changes.
- At vælge Forward (tightening), push the lever to one side.
- At vælge Bagside (loosening), push the lever to the opposite side.
4.2 Power Regulator Dial
The 4-position power regulator dial allows you to adjust the torque output of the tool.
- Rotate the dial to select the desired power setting.
- Lower settings are suitable for delicate tasks or when less torque is required.
- Higher settings provide maximum torque for stubborn fasteners.
4.3 Trigger Operation
The feather-touch trigger provides impressive control over the tool's speed and power.
- Gently squeeze the trigger to start the tool at a low speed.
- Increase pressure on the trigger to increase the tool's speed and power.
- Slip aftrækkeren for at stoppe værktøjet.
Figur 4.1: View of the tool's controls, including the feather-touch trigger and the power regulator dial.
5. Vedligeholdelse
Regular maintenance ensures optimal performance and extends the life of your Ingersoll Rand impact wrench.
- Smøring: Apply a few drops of pneumatic tool oil into the air inlet before each use or after every hour of continuous use.
- Luftfilter: Regularly check and clean the air filter on your air compressor to ensure a clean air supply to the tool.
- Rensning: Keep the tool clean and free of debris. Wipe down the exterior with a clean cloth. Do not use harsh solvents.
- Opbevaring: Store the tool in a dry, clean environment when not in use.
- Inspektion: Periodically inspect the tool for any signs of wear or damage. Replace worn or damaged parts immediately.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Værktøjet fungerer ikke eller har lav strøm | Low air pressure; Clogged air filter; Lack of lubrication; Worn internal parts | Check air compressor pressure (ensure 90 PSI); Clean or replace air filter; Lubricate tool with pneumatic oil; Contact authorized service center. |
| Overdreven støj eller vibrationer | Lack of lubrication; Loose components; Worn internal parts | Lubricate tool; Check for and tighten any loose fasteners; Contact authorized service center. |
| Luft lækker | Løse fittings; Beskadigede O-ringe eller pakninger | Tighten all air fittings; Replace damaged O-rings or seals. |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 2115QTIMAX |
| Drevstørrelse | 3/8 tommer |
| Max Torque (Reverse) | 300 fodpund |
| Driftstilstand | Mekanisk |
| Varelængde | 6 tommer |
| Varens vægt | 1.12 kilogram (ca. 2.47 lbs) |
| Materiale | Titanium (hammer case) |
| Farve | Grå |
| Hovedstil | Fast firkant |
| Målestandard | SAE (Inch) |
| Inkluderede komponenter | Ingersoll Rand - 3/8 Quiet Impactool (2115QTIMAX) |
8. Garanti og support
8.1 Producentgaranti
This Ingersoll Rand tool comes with a To års begrænset garanti (with tool registration). Please refer to the official Ingersoll Rand webwebstedet eller din købsdokumentation for at se de fulde garantivilkår og -betingelser.
8.2 Kundesupport
For technical assistance, parts, or service, please visit the official Ingersoll Rand website or contact their customer support directly. Keep your proof of purchase and model number handy for efficient service.