D-LINK DSL-X3052E Modem Router
Product Information
Specifications:
- Model: DSL-X3052E Modem Router
- Wireless Standard: Wi-Fi 802.11ac
- LAN Ports: 4 x Gigabit Ethernet
- WAN Port: 1 x DSL Port
Product Usage Instructions
Enabling Bridge Mode:
Step 1: Disable the router’s Wi-Fi by pressing the WLAN Button on the back of the unit. Connect your computer to one of the LAN ports of the router.
Step 2: Open your Internet browser and enter the IP address of your D-Link router in the address bar:
http://192.168.1.1. When prompted, type in the Username and Password.
Step 3: Go to Settings > Internet. In the Configure your WAN Connection drop-down menu, select XDSL. In the IPv4 Settings drop-down menu, select Bridge Mode. Click on the Save button.
Step 4: Go to Settings > Port Bind. Select the interface (e.g., LAN1) to bind the connection to. Click on the Save button.
Step 5: Go to Settings > Network. Disable DHCP Server. Disabling LAN IPv6 is optional. Click on the Save button.
FAQ
Q: What should I do if I forget the Username and Password for my router?
A: You can usually find the default Username and Password in the user manual provided with your router. If you have changed the credentials and forgotten them, you may need to perform a factory reset on your router to restore the default login details.
D-Link Technical Support – How to setup DSL-X3052 in Bridge Mode
Documents / Resources
 | D-LINK DSL-X3052E Modem Router [pdf] Owner's Manual DSL-X3052E Modem Router, DSL-X3052E, Modem Router, Router |