D-Link AX1500 Mesh Range Extender Installation Guide

AX1500 Mesh Range Extender

“

Specifications:

• Model: E15
• Type: AX1500 Mesh Range Extender
• Date: 2025/07/22
• Version: v1.00(AU)

Product Usage Instructions:

Option 1: EAGLE PRO AI APP SETUP

1. Download the EAGLE PRO AI app and launch it.
2. Tap “Install New Device” and scan the Setup code. Follow the
   on-screen instructions to complete the setup.

Quick WPS Setup:

1. Plug the E15 into a power source near your wireless router.
   Wait for the Status LED to flash orange.
2. Press the WPS button on your router for 3 seconds. Refer to
   your router’s manual for router behavior.
3. Press the WPS button on your E15 for 3 seconds. The status LED
   should start to flash white.

Option 2: WEB BROWSER SETUP

1. Plug in the Range Extender near your home router. Wait for the
   Status LED to flash orange.
2. Connect your computer to the Wi-Fi details printed on the Quick
   Installation Guide. Type http://WXYZ.devicesetup.net/ into a web
   browser (WXYZ represents the last 4 characters of the MAC address).
   Follow the on-screen instructions to complete the setup.

Setup Code:
Wi-Fi Name (SSID): E15-WXYZ
Wi-Fi password: XXXXXXXXXX

When the Status LED turns solid white (may take up to 3
minutes), this indicates that your E15 is connected to your
wireless router. Your setup is complete! You can now unplug and
move your device to a location between your router and the area
where you want wireless coverage. By default, your device will
share the same Wi-Fi name and password as your router.

IMPORTANT:
WPS may be disabled on some Routers or Modems. If the WPS Status
LED on your Router or Modem does not start blinking when you have
pressed the WPS button, try again and hold it a little longer. If
it still does not blink, STOP, and configure your E15 using EAGLE
PRO AI App Setup.

FAQ:

Why can’t I connect wirelessly or my wireless connection
drops?

1. Verify that your Range Extender is within range of your
   wireless router. Try plugging it into a location closer to the
   router and verify the Status LED is solid white.
2. Note that when extending a wireless signal from a router or
   access point, devices connected to the Range Extender will not get
   the same speed/througput as when connected directly to the
   router.

Signal Strength Indicator:
Weak (1 x White)
Good (2 x White)
Strong (3 x White)

Why can’t I access the web-based configuration utility?

Verify that http://WXYZ.devicesetup.net/ has been correctly
entered into the browser (WXYZ represents the last 4 characters of
the MAC address). The Wi-Fi Name/SSID, Wi-Fi Password, and device
password are printed on the Quick Installation Guide and on the
device label.

Why can’t I access the Internet?

Power cycle your Range Extender and check your Internet access
again. If you still cannot connect to the Internet, check your
wireless router. Refer to your wireless router’s manual for
troubleshooting.

What do I do if I forgot my device password or my Wi-Fi
Password?

If you forgot your device password or Wi-Fi password, refer to
the Quick Installation Guide or contact customer support for
assistance.

“`

Quick Installation Guide
E15
AX1500 Mesh Range Extender
What’s in the Box
· E15 || AX1500 Mesh Range Extender · Ethernet Cable · Quick Installation Guide

Installation

OPTION 1

EAGLE PRO AI APP SETUP

1 Download the EAGLE PRO AI / app and launch it.

2 Tap Install New Device. Scan the / Setup code. Follow the on-screen instructions to complete the setup.

Setup Code

EAGLE PRO AI

Quick WPS Setup
You can easily pair you device with any router to extend your wireless coverage.
1 Plug the E15 into a power source near your / wireless router. Wait for the Status LED to flash orange.
2 Press the WPS button on your router for 3 / seconds. Refer to your router’s manual for router behaviour.
3 Press the WPS button on your E15 for 3 / seconds. The status LED should start to flash white.

Setup Code
This is a backup of your device’s Setup Code. Please keep it as future reference for your device.

OPTION 2

WEB BROWSER SETUP

1 Plug in the Range Extender near your / home router. Wait for the Status LED to flash orange.

2 Connect your computer to the Wi-Fi / details printed on the Quick Installation Guide. Type http://WXYZ.devicesetup.net/ into a web browser. (WXYZ represents the last 4 characters of the MAC address). Follow the on-screen instructions to complete the setup.
Setup Code

Wi-Fi Name (SSID): E15-WXYZ Wi-Fi password: XXXXXXXXXX

I http://WXYZ.devicesetup.net/

dlink-xxxx Connect
xxxxxxxxx xxxxxxxxx

4 When the Status LED turns solid white / (may take up to 3 minutes), this indicates that your E15 is connected to your wireless router.
Your setup is complete! You can now unplug and move your device to a location between your router and the area where you want wireless coverage. By default, your device will share the same Wi-Fi name and password as your router.
IMPORTANT
WPS may be disabled on some Routers or Modems. If the WPS Status LED on your Router or Modem does not start blinking when you have pressed the WPS button, try again and hold it a little longer. If it still does not blink, STOP, and configure your E15 using EAGLE PRO AI App Setup.

2025/07/22_90x130 v1.00(AU) 4GIDAPX15DLAU1XX

FAQ

Why can’t I connect wirelessly or my wireless connection drops? 1. Verify that your Range Extender is within range of
your wireless router. Try plugging it into a location closer to the router and verify the Status LED is solid white. 2. Note that when extending a wireless signal from a router or access point, devices connected to the Range Extender will not get the same speed/ throughput as when connected directly to the router.
Signal Strength Indicator
Weak (1 x White) Good (2 x White) Strong (3 x White)

Why can’t I access the web-based configuration utility?
Verify that http://WXYZ.devicesetup.net/ has been correctly entered into the browser (WXYZ represents the last 4 characters of the MAC address). The Wi-Fi Name/SSID, Wi-Fi Password, and device password are printed on the Quick Installation Guide and on the device label.
Why can’t I access the Internet?
Power cycle your Range Extender and check your Internet access again. If you still can not connect to the Internet, check your wireless router. Refer to your wireless router’s manual for troubleshooting.
What do I do if I forgot my device password or my Wi-Fi Password?
1. If you forgot your password, you must reset your Range Extender. This process will change all your settings back to the factory defaults.
2. Set up your Range Extender using your preferred method.

How do I restore the Range Extender to its factory default settings? Locate the reset button. With the Range Extender powered on, use a paper clip to hold the button down until the LED turns solid red. Release the button and the Range Extender will go through its reboot process.
Reset Button

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
GPL Code Statement
GPL Source Code Support https://tsd.dlink.com.tw/GPL

LIMITED WARRANTY AUSTRALIA / NEW ZEALAND ONLY
This warranty prevails over the Global Warranty for goods sold within the Commonwealth of Australia and New Zealand. Subject to the terms and conditions set forth herein, D-Link Australia Pty Ltd. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from:
· D-Link or its authorized reseller or distributor and · Products purchased and delivered within Australia and New Zealand by D-Link
LIMITED WARRANTY
D-Link warrants that the hardware portion of the D-Link products described below will be free from material defects in workmanship and materials from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except as otherwise stated herein.
· Hardware One (1) Year
D-Link Product purchased in Australia on or after January 1, 2012: In addition to the Limited Warranty, D-Link Products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au.
D-Link’s sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Link’s sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or have an identical make, model or part. D-Link may in its sole discretion replace the defective Hardware (or any part thereof) with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement Hardware will be warranted for the remainder of the original Warranty Period from the date of original retail purchase. If a material defect is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware (or part thereof) that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund.
LIMITED SOFTWARE WARRANTY
D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specifications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (“Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation. D-Link further warrants that, during the Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. D-Link’s sole obligation shall be to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s functional specifications for the Software or to refund at D-Link’s sole discretion. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. Software will be warranted for the remainder of the original Warranty Period from the date or original retail purchase. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that

it is not practical to replace the non-conforming Software, the price paid by the original licensee for the nonconforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates.
NON-APPLICABILITY OF WARRANTY
The Limited Warranty provided hereunder for hardware and software of D-Link’s products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold “As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.
SUBMITTING A CLAIM
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:
· The customer must submit with the product as part of the claim a written description of the Hardware defect or Software non-conformance in sufficient detail to allow D-Link to confirm the same.
· The original product owner must obtain a Return Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if requested provide written proof of purchase of the product (such as a copy of the dated purchase invoice for the product) before the warranty service is provided.
· After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the Product and will not ship back any accessories.
· The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Australia Pty Ltd., 6 – 10 Talavera Road, North Ryde, NSW 2113. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges are prepaid by the customer and upon request.
D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming.
WHAT IS NOT COVERED
This Limited Warranty provided by D-Link does not cover: Products, if in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial

installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link; Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product. Repair by anyone other than D-Link or an Authorized D-Link Service Office will void this Warranty.
DISCLAIMER OF OTHER WARRANTIES
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.
LIMITATION OF LIABILITY
TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY.
GOVERNING LAW
This Limited Warranty shall be governed by the laws of the State of New South Wales, Australia. Some states within Australia and New Zealand do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specific legal rights and the product owner may also have other rights which vary within other states of Australia and New Zealand.
TRADEMARKS
D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners.

COPYRIGHT STATEMENT
No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Australia Pty Ltd. Contents are subject to change without prior notice.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.

TECHNICAL SUPPORT FOR AUSTRALIA AND NEW ZEALAND ONLY

D-Link 1st Level Technical Support is available 24 hours, 7 days a week for all products originating from the D-Link Australia Pty Ltd logistics centre and sold via its authorised distribution and sales channels.

AUSTRALIA Technical Support

NEW ZEALAND Technical Support

Visit: http://support.dlink.com.au

Visit: http://support.dlink.co.nz

Call: 1300 700 100

Call: 0800 900 900

Please contact your original place of purchase for products originating from sources other than D-Link Australia Pty Ltd for both Warranty and Support.
For detailed warranty outside of Australia or New Zealand, please contact corresponding local D-Link office

Documents / Resources

D-Link AX1500 Mesh Range Extender [pdf] Installation Guide AX1500 Mesh Range Extender, AX1500, Mesh Range Extender, Range Extender, Extender

References

• User Manual