kvm-tec KT-6012L CPU MV1 Single Redundant In Copper Instruction Manual

kvm-tec
Cymorth Cyntaf
MASTERfl ex

Cynnwys cuddio

1 KT-6012L CPU MV1 Single Redundant In Copper

2 Cynnwys Dosbarthu

3 USING THE ON SCREEN MENU

4 STATWS SYSTEM

5 VIEWING THE FIRMWARE VERSION

6 PWYNT I BWYNT

7 Dogfennau / Adnoddau

7.1 cyfeiriadau

8 Swyddi cysylltiedig

KT-6012L CPU MV1 Single Redundant In Copper

kvm-tec Support
[e-bost wedi'i warchod]
Ffôn: +43 2253 81912 - 30

SET 6012
MASTERfl ex MV1 SINGLE
REDUNDANT IN COPPER
KT – 6012L CPU/LOCAL
KT – 6012R CON/REMOTE

kvm-tec
Cyflym
Gosod

Cynnwys Dosbarthu

Uned LLEOL/CPU
1 x MA1 local (CPU)
1 x wall power supply! 12V 1A (1NT or EU-plug)
2 x DVI – DVI cable 1,8m/5.9ft
1 x US8 canle 1,8m/5.9ft
4 x troedfedd rwber
Uned O BELL/CON
1 x MM remote (CON)
1 x wall power supply) 12V 1A (RC orEU-plug)
4x rubber feet

Open OSO menu
The 050 main menu is opened with the standard
shortcut $ x ALT Gr
(Attention: the first 20 seconds S x Saol I always
works, in case the shortcut was forgotten.)
Switching Ilst : CTRL+ALT+PRINT
Changing the shortcuts in the 051) menu
Go to the Remote Settings and then navigate to
Llwybr Byr Bysellfwrdd.

Quick Installation Masterflex Single local / CPU – remote / CON

Cysylltwch y CON / Remote a'r CPU / Uned Leol i'r cyflenwad pŵer 12V 2A sydd wedi'i gynnwys.
Nawr cysylltwch y cebl USB â phorthladd USB ar eich cyfrifiadur personol a chysylltwch ben arall y cebl USB â'r CPU / Uned Leol. Cysylltwch y bysellfwrdd a'r llygoden i'r Uned CON / Remote.
Cysylltwch y CPU / Lleol a'r Uned CON / Anghysbell gyda chebl rhwydwaith.
Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU Local Unit (PC-in).
Opt: Cysylltwch sain PC / allan gyda'r cebl sain i sain lleol / i mewn. Cysylltwch sain / allan trwy'r cebl sain
Almost done! Opt: Connect the audio cable local audio/out to the PC audio/in and remote audio/out with audio cable to the microphone
Using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP snooping.

HAVE FUN – your kvm-tec Extender is now in use for many years (MTBF approx 10 years)

USING THE ON SCREEN MENU

Use the monitor and keyboard to use the main menu.
To access the main menu:

Make sure the extenders, the monitors and the computer are switched on.
Press the ALT+GR key on your keyboard quickly five times.
The main menu appears with an overview of the sub-menus.
To open a sub-menu press the applicable key.

prif ddewislen

Prif meu Llwybrau Byr :
S Statws Drosoddview
U Diweddaru Flash FW
F Nodweddion Drosoddview
Opsiwn DDC D
L Gosodiadau Lleol
R Gosodiadau Anghysbell
A Am Drosview
L Link Redundancy
Q Exit

Menu Status /current status
Diweddariadau Cadarnwedd
Nodweddion Gosodiadau
DDC Option Fix settings 1020 x 1080
Gosodiadau Lleol
Gosodiadau o Bell
Drosview Upgrades Upgrades

STATWS SYSTEM

Ddeuol
In the status overview menu the current status of the extender connection is displayed. It provides information on the connection itself as well as resolution of the video channel, and USBstatus. The enabled options and the current firmware-version is displayed in the left top corner. Link status shows whether there is a physical connection available. Connected indicates if kvm data is currently able to be transmitted. Video and USB show if data is currently being transmitted.

VIEWING THE FIRMWARE VERSION

Under „A“ – About the currently installed fi rmware version of the remote (CON) and local (CPU) Extender is displayed.

FEATURES MENÜ

Features Menu
P Point to Point Mode
M Matrix Switching Mode
D Freeze last Image
E USB Emulation Mode
S USB Save Feature
O Power Redundance Alert
C Diagnosis
U Unlock Features
I IP Management
L Link Redundancy Alert

Galluogwyd / Anabl
(Point to Point Point to Point excludes itself
with Matrix mode
Disabled/Enabled
(Disabled)Disabled/Enabled
(Disabled ) Disabled/Enabled
(mass storage usable) Disabled/Enabled
System Rhybudd
Diagnosis menu
Unlock Features
IP Management
redundanter Link

PWYNT I BWYNT

You can switch the Point to Point mode on and oﬀ by pressing the „P“ key
SYLW – if the point to point mode is activated, the switching mode cannot be activated

MATRIX SWITCHING MODE
By pressing the „M“ button you can switch the Matrix Switching Mode oﬀ and on

KVM-TEC Gewerbepark Mitterfeld 1 A 2523 Tattendorf Awstria www.kvm-tec.com	KVM-TEC ASIA p +9173573 20204 [e-bost wedi'i warchod] KVM-TEC CHINA P + 86 1360 122 8145 [e-bost wedi'i warchod] www.kvm-tec.com
IHSE GmbH Benzstr.1 88094 Oberteuringen Yr Almaen www.ihse.com	IHSE UDA LLC 1 Corp.Dr.Suite Cranbury NJ 08512 UDA www.ihseusa.com
IHSE GmbH Asia 158Kallang Ffordd, #07-13A 349245 Singapôr www.ihse.com	IHSE Tsieina Co, Ltd Mae IHSE Tsieina Co, Ltd Ystafell 814 Adeilad 3, Kezhu Road Guangzhou PRC www.ihse.com.cn

Llawn HD
dros IP
Edrychwch ar
our Installation
Channel:

http://www.kvm-tec.com/videos/videos-installation-channel

We are here for you to answer your questions about installation? Manual download www.kvm-tec.com neu kvm-tec Installationchannel ar ein hafan yn bersonol +43 2253 81912

www.kvm-tec.com

Dogfennau / Adnoddau

kvm-tec KT-6012L CPU MV1 Single Redundant In Copper [pdf] Llawlyfr Cyfarwyddiadau
KT-6012L CPU MV1 Single Redundant In Copper, KT-6012L CPU, MV1 Single Redundant In Copper, Redundant In Copper, In Copper, Copper