Cuvccn TSV Multifunction Bike Light Combination
SPECIFICATION
Multifunction bike light combination
Installation Introduction
2 Ways to Install: Sideways or Upright 45° Twist to Fix and Disassemble
- Fix the Silicone Strap to Handlebar or Seat-Post
- Tighten the Strap Buckle to the Bracket
- 45° inclined insertion, then twist to lock
- Installation Done
Charging Tips
Product Details
| White Front light | Red Rear light | |
| Light Source Brightness | SZ5–M3*3PCS+2835‘3PCS 350LM+150LM | 2835’6PCS+3014’18PCS SOLM+SOLM |
| Using Time | 4-35H | 4-33H |
| Battery Charging | Lithium polymer{1100mAh) 2.5H | Lithium polymer(350mAh) 1.5H |
| Modes | 8 Modes | 12 Modes |
| Net Weight | 45g | 33g |
| Product Size | so•40•30MM | |
| Material | PC | |
| Anti-drop | 3M | |
| Waterproof | IP65 | |
Function Specification
- Independent Double Switch High Beam/ Low Beam
- Single Press to Turn on and Switch Modes Long Press to Turn Off
Documents / Resources
 | Cuvccn TSV Multifunction Bike Light Combination [pdf] User Manual TSV Multifunction Bike Light Combination, TSV, Multifunction Bike Light Combination, Bike Light Combination, Light Combination |