cudy-LOGO

cudy FS1016D 6-Port 10-100Mbps Desktop Switch

cudy FS1016D 6-Port 10-100Mbps Desktop Switch-FIG1

Physical Connection

cudy FS1016D 6-Port 10-100Mbps Desktop Switch-FIG2

LED Indication

cudy FS1016D 6-Port 10-100Mbps Desktop Switch-FIG3

Main Features

  • Model :FS1016D
  • Standards and Protocols : IEEE 802.3, IEEE 802.3u, IEEE 802.3x
  • Interface : 16 10/100Mbps RJ45 Ports
  • Forwarding Mode : Store-and-Forward
  • Power Supply : Output: 5VDC/1A
  • Dimensions : 138*103*35 mm
  • Weight  : 0.228kg
  • Fanless : Yes
  • Switching Capacity : 3.2Gbps
  • Packet Filtering : 148,800 ppsfor 100M
  • Forwarding Rate : 14,880 pps for 10M
  • MAC Address Table : 8K
  • Operating Temperature : 0°C~40°C(32°F~104°F)
  • Storage Temperature : 40eC*70°C(-40eF-158°F)
  • Operating Humidity : 10%~90%RH non-condensing
  • Storage Humidity : 5%~90%RH non-condensing

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

EU declaration of conformity

Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of conformity may be found at http://www.cudy.com/en/ce
For support and warranty, please visit: http://www.cudy.com/. Specifications are subject to change without notice. Cudy is a registered trademark of Shenzhen Cudy Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.Copyright©2022 Shenzhen Cudy Technology Co., Ltd. All rights reserved.

Email:
support@cudy.com

Website:
www.cudy.com

Documents / Resources

cudy FS1016D 6-Port 10-100Mbps Desktop Switch [pdf] Installation Guide
FS1016D, 6-Port 10-100Mbps Desktop Switch, 10-100Mbps Desktop Switch, 6-Port Desktop Switch, Desktop Switch, Switch, FS1016D Desktop Switch

References

Leave a comment

Your email address will not be published. Required fields are marked *