Prime LS100 LTE Tracker
LTE Tracker
Prime LS100 User Manual
Revize: 1.00
Název dokumentu Verze Final Date Stav ID kontroly dokumentu
Prime LS100 User manual 1.00 2020-03-26 Released TRACKER Prime LS100
1
Obsah
1 Introduction …………………………………………………………………………………………………………………..3 2 Product Overview……………………………………………………………………………………………………………
2.1 Appearance ………………………………………………………………………………………………………….3 2.2 Buttons Interface Description …………………………………………………………………………………4 2.3 LED Description …………………………………………………………………………………………………….5 3 Getting Started……………………………………………………………………………………………………………….6 3.1 Parts List ………………………………………………………………………………………………………………6 3.2 Built-in Battery ……………………………………………………………………………………………………..6 3.3 Prime LS100 Adapter……………………………………………………………………………………………..7 3.4 Power on/Power off ………………………………………………………………………………………………8 4 Frequency………………………………………………………………………………………………………………………8 5 Trouble shooting and Safety info ………………………………………………………………………………………9 5.1 Trouble shooting …………………………………………………………………………………………………..9 5.2 Safety info…………………………………………………………………………………………………………….9
2
1 Úvod
Prime LS100 is a powerful LTE Tracker which is designed as Emergency call equipment. It works on LTE B4/B13 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime LS100 can communicate with the backend server through LTE network, and transfer reports of emergency. Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol.
The WIFI function will be activated and report the MAC addresses once the device is in alerting state. The BLE function will be activated and scan the third-party BLE data or Beacon broadcast by custom setting or protocol.
RF 433MHz is used as a supervised short range RF communication link between the unit and the Base Station to determine if they are no longer in range with each other.
2 Produkt skončilview
2.1 Vzhled
Obrázek 1 1-
3
2.2 Buttons Interface Description
Button /USB Interface Description
KLÍČ/rozhraní
Resetovací klíč
Power off the Prime LS100
Popis
Adapter Function Key Feature Key
Connected to a Power supply socket can power on Prime LS100 SOS mode Play to do list audios.
TEST Key
Testovací mód
4
2.3 Popis LED
Figure 1-2 There are 3 LED lights in Prime LS100 device, the description as following.
Světlo
událost
Stát
Function Key LED Function Key pressed
Solid when pressed
Feature Key LED
Feature Key pressed
Solid when pressed
Test Key LED
Test Key pressed
Solid when pressed
Breath Light
Test Key long press
Breath effect
5
3 Začínáme
3.1 Seznam dílů
Name Prime LS100 Base Station
Obrázek
Remark The LTE Base Station.
Prime LS100 adapter
It used to power on the Prime LS100.
3.2 Vestavěná baterie
The following items are suggestion for built-in battery usage, please pay more attention. The device is Emergency call equipment, which is designed to be used by adapter always plugged. There is a 850mAh Lithium polymer battery integrated in device. The built-in battery will only be used when the adapter unplugged.
Note: If the Prime LS100 device is firstly used, please make sure the adapter of the device is plugged in the power supply socket.
6
3.3 Prime LS100 Adapter
Prime LS100 base station is connected with an AC Adapter. The adapter is used for device power on, built-in battery charging, which should be plugged in power supply socket at any time ( by end user).
Obrázek 2 1-
7
3.4 Zapnutí/vypnutí
Figure 2-2 Power on: Plug in the power adapter and power on. Power off: Unplugged the power adapter and press the Reset button.
Note: the user can not power off Prime LS100 if the adapter is plugged.
4 Frekvence
LTE: Band2/Band4/Band5/Band12/Band13 WIFI::2412MHz-2462MHz BLE:2412MHz-2472MHz 433:433.92MHZ
8
5 Odstraňování problémů a bezpečnostní informace
5.1 Řešení problémů
Zprávy o potížích nelze hlásit na server backend pomocí mobilní sítě.
Unable to power off Prime LS100.
Baterii nelze nabíjet
Possible Reason APN is wrong. Some APN can not visit the internet directly. The IP address or port of the backend server is wrong. The function of power key was disabled by AT+GTFKS. The battery has not been used for too long time and has been locked.
Řešení Požádejte provozovatele sítě o správné APN.
Ujistěte se, že IP adresa backendového serveru je identifikovaná adresa na internetu. Povolte funkci vypínače pomocí AT+GTFKS.
Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help.
5.2 Bezpečnostní informace
The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid
exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use Prime LS100 on the airplane or near medical equipment.
Upozornění FCC.
§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
9
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withmin imum distance 20cm between the radiator & your body.
10
Dokumenty / zdroje
 |
Micron Electronics Prime LS100 LTE Tracker [pdf] Uživatelský manuál BAS4GA, ZKQ-BAS4GA, ZKQBAS4GA, Prime LS100 LTE Tracker, LS100 LTE Tracker, LTE Tracker, Tracker |
